Hi Xailers!
1.
When you copy some controls from a form and insert them into another form
you can't move them with the mouse or the cursor-keys till you restart the
IDE.
2.
When you copy a complete toolbar with toolbuttons, bitmaps and
codeblocks - for example to navigate in a tbrowse - from one form and insert
it into a second form (with the same named browse and methods) it will not
be inserted in the xfm-file of the second form. If you click onto the inserted
toolbar on the second form always the first form will be displayed.
3.
When you add a new toolbutton to a toolbar and assign the button property
cVarName the name will not be added to the component-list of the prg-file.
After leaving and entering the property-field again the name will be registered
as a component in the prg.
4.
When you inserted some copied code into the editor and goes on with writing
without any move by cursor-keys or mouse the copied text will be overwrote.
Apart from these really small problems I'm very happy about this fantastic
product. Thank you very much for your great work!
Regards
Ingo
In order for this site to work correctly we need to store a small file (called a cookie) on your computer. Most every site in the world does this, however since the 25th of May 2011, by law we have to get your permission first. Please abandon the forum if you disagree.
Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.
Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.
V 1.4 small IDE problems
V 1.4 small IDE problems
P.S.
4. the editor behaviour doesn't appear always therefore I can't specify it
better. As I noticed it appears when the copied text is not ending with CRLF.
4. the editor behaviour doesn't appear always therefore I can't specify it
better. As I noticed it appears when the copied text is not ending with CRLF.
V 1.4 small IDE problems
P.S.
4. the editor behaviour doesn't appear always therefore I can't specify it
better. As I noticed it appears when the copied text is not ending with CRLF.
4. the editor behaviour doesn't appear always therefore I can't specify it
better. As I noticed it appears when the copied text is not ending with CRLF.
V 1.4 small IDE problems
Ingo,
Sorry for the delay. I've just tested it and:
> 1.
> When you copy some controls from a form and insert them into another form
> you can't move them with the mouse or the cursor-keys till you restart the
> IDE.
It's working fine here. Please, send us a 'step by step' procedure to
replicate it.
> 2.
> When you copy a complete toolbar with toolbuttons, bitmaps and
> codeblocks - for example to navigate in a tbrowse - from one form and
> insert
> it into a second form (with the same named browse and methods) it will not
> be inserted in the xfm-file of the second form. If you click onto the
> inserted
> toolbar on the second form always the first form will be displayed.
I've seen that the toolbar have to be pasted twice in order to be place on
the new form. We'll fix it ASAP. However, when the toolbar appears on the
new form, it works ok.
> 3.
> When you add a new toolbutton to a toolbar and assign the button property
> cVarName the name will not be added to the component-list of the prg-file.
> After leaving and entering the property-field again the name will be
> registered
> as a component in the prg.
Yes, we'll fix it ASAP.
> 4.
> When you inserted some copied code into the editor and goes on with
> writing
> without any move by cursor-keys or mouse the copied text will be
> overwrote.
I've not been able to replicate the problem.
> Apart from these really small problems I'm very happy about this fantastic
> product. Thank you very much for your great work!
Thanks for your kind words!
--
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info
Sorry for the delay. I've just tested it and:
> 1.
> When you copy some controls from a form and insert them into another form
> you can't move them with the mouse or the cursor-keys till you restart the
> IDE.
It's working fine here. Please, send us a 'step by step' procedure to
replicate it.
> 2.
> When you copy a complete toolbar with toolbuttons, bitmaps and
> codeblocks - for example to navigate in a tbrowse - from one form and
> insert
> it into a second form (with the same named browse and methods) it will not
> be inserted in the xfm-file of the second form. If you click onto the
> inserted
> toolbar on the second form always the first form will be displayed.
I've seen that the toolbar have to be pasted twice in order to be place on
the new form. We'll fix it ASAP. However, when the toolbar appears on the
new form, it works ok.
> 3.
> When you add a new toolbutton to a toolbar and assign the button property
> cVarName the name will not be added to the component-list of the prg-file.
> After leaving and entering the property-field again the name will be
> registered
> as a component in the prg.
Yes, we'll fix it ASAP.
> 4.
> When you inserted some copied code into the editor and goes on with
> writing
> without any move by cursor-keys or mouse the copied text will be
> overwrote.
I've not been able to replicate the problem.
> Apart from these really small problems I'm very happy about this fantastic
> product. Thank you very much for your great work!
Thanks for your kind words!
--
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info
V 1.4 small IDE problems
Ingo,
Sorry for the delay. I've just tested it and:
> 1.
> When you copy some controls from a form and insert them into another form
> you can't move them with the mouse or the cursor-keys till you restart the
> IDE.
It's working fine here. Please, send us a 'step by step' procedure to
replicate it.
> 2.
> When you copy a complete toolbar with toolbuttons, bitmaps and
> codeblocks - for example to navigate in a tbrowse - from one form and
> insert
> it into a second form (with the same named browse and methods) it will not
> be inserted in the xfm-file of the second form. If you click onto the
> inserted
> toolbar on the second form always the first form will be displayed.
I've seen that the toolbar have to be pasted twice in order to be place on
the new form. We'll fix it ASAP. However, when the toolbar appears on the
new form, it works ok.
> 3.
> When you add a new toolbutton to a toolbar and assign the button property
> cVarName the name will not be added to the component-list of the prg-file.
> After leaving and entering the property-field again the name will be
> registered
> as a component in the prg.
Yes, we'll fix it ASAP.
> 4.
> When you inserted some copied code into the editor and goes on with
> writing
> without any move by cursor-keys or mouse the copied text will be
> overwrote.
I've not been able to replicate the problem.
> Apart from these really small problems I'm very happy about this fantastic
> product. Thank you very much for your great work!
Thanks for your kind words!
--
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info
Sorry for the delay. I've just tested it and:
> 1.
> When you copy some controls from a form and insert them into another form
> you can't move them with the mouse or the cursor-keys till you restart the
> IDE.
It's working fine here. Please, send us a 'step by step' procedure to
replicate it.
> 2.
> When you copy a complete toolbar with toolbuttons, bitmaps and
> codeblocks - for example to navigate in a tbrowse - from one form and
> insert
> it into a second form (with the same named browse and methods) it will not
> be inserted in the xfm-file of the second form. If you click onto the
> inserted
> toolbar on the second form always the first form will be displayed.
I've seen that the toolbar have to be pasted twice in order to be place on
the new form. We'll fix it ASAP. However, when the toolbar appears on the
new form, it works ok.
> 3.
> When you add a new toolbutton to a toolbar and assign the button property
> cVarName the name will not be added to the component-list of the prg-file.
> After leaving and entering the property-field again the name will be
> registered
> as a component in the prg.
Yes, we'll fix it ASAP.
> 4.
> When you inserted some copied code into the editor and goes on with
> writing
> without any move by cursor-keys or mouse the copied text will be
> overwrote.
I've not been able to replicate the problem.
> Apart from these really small problems I'm very happy about this fantastic
> product. Thank you very much for your great work!
Thanks for your kind words!
--
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info
V 1.4 small IDE problems
Jose,
the delay didn't matter, as I said, these are very, very small problems.
>> 1.
>> When you copy some controls from a form and insert them into another form
>> you can't move them with the mouse or the cursor-keys till you restart
the
>> IDE.
>
>It's working fine here. Please, send us a 'step by step' procedure to
>replicate it.
>
>
I tried to build a small sample but on that it works fine!?
I'm rebuilding a bigger application and to save time I copied from the old
dialog forms all the labels to the new ones. After a while this problem happens.
After saving and restarting the IDE I could move them without any problem.
After a while (copying - compiling - testing without leaving Xailer) it happens
again.
AFAIK are you working very often with the IDE, maybe you will see it sometimes.
Nevertheless thank you very much for your treatment.
Regards
Ingo
the delay didn't matter, as I said, these are very, very small problems.
>> 1.
>> When you copy some controls from a form and insert them into another form
>> you can't move them with the mouse or the cursor-keys till you restart
the
>> IDE.
>
>It's working fine here. Please, send us a 'step by step' procedure to
>replicate it.
>
>
I tried to build a small sample but on that it works fine!?
I'm rebuilding a bigger application and to save time I copied from the old
dialog forms all the labels to the new ones. After a while this problem happens.
After saving and restarting the IDE I could move them without any problem.
After a while (copying - compiling - testing without leaving Xailer) it happens
again.
AFAIK are you working very often with the IDE, maybe you will see it sometimes.
Nevertheless thank you very much for your treatment.
Regards
Ingo
V 1.4 small IDE problems
Jose,
the delay didn't matter, as I said, these are very, very small problems.
>> 1.
>> When you copy some controls from a form and insert them into another form
>> you can't move them with the mouse or the cursor-keys till you restart
the
>> IDE.
>
>It's working fine here. Please, send us a 'step by step' procedure to
>replicate it.
>
>
I tried to build a small sample but on that it works fine!?
I'm rebuilding a bigger application and to save time I copied from the old
dialog forms all the labels to the new ones. After a while this problem happens.
After saving and restarting the IDE I could move them without any problem.
After a while (copying - compiling - testing without leaving Xailer) it happens
again.
AFAIK are you working very often with the IDE, maybe you will see it sometimes.
Nevertheless thank you very much for your treatment.
Regards
Ingo
the delay didn't matter, as I said, these are very, very small problems.
>> 1.
>> When you copy some controls from a form and insert them into another form
>> you can't move them with the mouse or the cursor-keys till you restart
the
>> IDE.
>
>It's working fine here. Please, send us a 'step by step' procedure to
>replicate it.
>
>
I tried to build a small sample but on that it works fine!?
I'm rebuilding a bigger application and to save time I copied from the old
dialog forms all the labels to the new ones. After a while this problem happens.
After saving and restarting the IDE I could move them without any problem.
After a while (copying - compiling - testing without leaving Xailer) it happens
again.
AFAIK are you working very often with the IDE, maybe you will see it sometimes.
Nevertheless thank you very much for your treatment.
Regards
Ingo