Xailer & OZ Software

G'day,
Xhailer is great, but breakpoints are giving a few problems.
They don't always break, or clear.
Sometimes I have to Clear All breakpoints, and Set my breakpoints and
rebuild several times, before the breakpoint works.
Sometimes ClearAllBreakpoints doesn't work. I have to manually clear them.
I have the 'Debuggin On' in project settings.
Regards,
Leigh.

Capsol,
This problem is fixed. A new module fixing this problems is on this same
forum posted few days ago. I hope you can find it.
Regards,
"Capsol Coder" <nick__NOSPAM__@capsol.com.au> escribió en el mensaje
news:[email=44bd6fef@news.xailer.com...]44bd6fef@news.xailer.com...[/email]
> G'day,
>
> Xhailer is great, but breakpoints are giving a few problems.
> They don't always break, or clear.
> Sometimes I have to Clear All breakpoints, and Set my breakpoints and
> rebuild several times, before the breakpoint works.
> Sometimes ClearAllBreakpoints doesn't work. I have to manually clear them.
> I have the 'Debuggin On' in project settings.
>
>
> Regards,
> Leigh.
>
>
>
>

Capsol,
> Xhailer is great, but breakpoints are giving a few problems.
> They don't always break, or clear.
> Sometimes I have to Clear All breakpoints, and Set my breakpoints and
> rebuild several times, before the breakpoint works.
> Sometimes ClearAllBreakpoints doesn't work. I have to manually clear them.
> I have the 'Debuggin On' in project settings.
You are right. I've just noticed that. The problem is that the true internal
bp list and its corresponding visible mark in the editor (the red line) are
not synched. So, if you modify the code while a bp is there, the mark in the
editor is moved but the bp remains setted to the original line number. I'll
try to fix it ASAP.
--
Regards,
Jose F. Gimenez
http://www.xailer.com

G'day Ignacio
I can't find the module you mention.
Regards,
Leigh
"Ignacio Ortiz de Zúñiga" <NoName@xailer.com> wrote in message
news:44bde954$[email=1@news.xailer.com...]1@news.xailer.com...[/email]
> Capsol,
>
> This problem is fixed. A new module fixing this problems is on this same
> forum posted few days ago. I hope you can find it.
>
> Regards,
>
> "Capsol Coder" <nick__NOSPAM__@capsol.com.au> escribió en el mensaje
> news:[email=44bd6fef@news.xailer.com...]44bd6fef@news.xailer.com...[/email]
>> G'day,
>>
>> Xhailer is great, but breakpoints are giving a few problems.
>> They don't always break, or clear.
>> Sometimes I have to Clear All breakpoints, and Set my breakpoints and
>> rebuild several times, before the breakpoint works.
>> Sometimes ClearAllBreakpoints doesn't work. I have to manually clear
>> them.
>> I have the 'Debuggin On' in project settings.
>>
>>
>> Regards,
>> Leigh.
>>
>>
>>
>>
>
>

Capsol,
Do not worry. We will publish a new version really soon.
Regards,
"Capsol Coder" <nick__NOSPAM__@capsol.com.au> escribió en el mensaje
news:[email=44c43f49@news.xailer.com...]44c43f49@news.xailer.com...[/email]
> G'day Ignacio
> I can't find the module you mention.
>
> Regards,
> Leigh
>
> "Ignacio Ortiz de Zúñiga" <NoName@xailer.com> wrote in message
> news:44bde954$[email=1@news.xailer.com...]1@news.xailer.com...[/email]
>> Capsol,
>>
>> This problem is fixed. A new module fixing this problems is on this same
>> forum posted few days ago. I hope you can find it.
>>
>> Regards,
>>
>> "Capsol Coder" <nick__NOSPAM__@capsol.com.au> escribió en el mensaje
>> news:[email=44bd6fef@news.xailer.com...]44bd6fef@news.xailer.com...[/email]
>>> G'day,
>>>
>>> Xhailer is great, but breakpoints are giving a few problems.
>>> They don't always break, or clear.
>>> Sometimes I have to Clear All breakpoints, and Set my breakpoints and
>>> rebuild several times, before the breakpoint works.
>>> Sometimes ClearAllBreakpoints doesn't work. I have to manually clear
>>> them.
>>> I have the 'Debuggin On' in project settings.
>>>
>>>
>>> Regards,
>>> Leigh.
>>>
>>>
>>>
>>>
>>
>>
>
>

I have downloaded and installed 1.0b but I am still having problems with
breakpoints.
They do not reliably 'break'
They seem to not like being more than a few lines from the beginning of a
procedure, or in the body of IF's or CASE's
I am reduced to banging down half a dozen, in the hope that at least one
will break, then single stepping from the beginning of a sub.
They still seem to sometimes forget where they are after editting, and
require "Clear All breakpoints"
Regards,
Leigh.

Capsol,
>I have downloaded and installed 1.0b but I am still having problems with
>breakpoints.
>
> They do not reliably 'break'
>
> They seem to not like being more than a few lines from the beginning of a
> procedure, or in the body of IF's or CASE's
>
> I am reduced to banging down half a dozen, in the hope that at least one
> will break, then single stepping from the beginning of a sub.
>
> They still seem to sometimes forget where they are after editting, and
> require "Clear All breakpoints"
It's really strange. Please, provide us a sample or a step by step procedure
to reproduce the problem.
--
Regards,
Jose F. Gimenez
http://www.xailer.com

I have downloaded and installed 1.1a but I am still having problems with
breakpoints.
The first break point I set went straight by.
The second break point I set worked OK.
I have the 'Debuggin On' in project settings.
Regards,
Leigh.

Capsol,
Send us a really small sample please.
Regards,
--
Ignacio Ortiz de Zúñiga
http://www.xailer.com
"Capsol Coder" <nick__NOSPAM__@capsol.com.au> escribió en el mensaje
news:[email=455a6b9e@news.xailer.com...]455a6b9e@news.xailer.com...[/email]
>I have downloaded and installed 1.1a but I am still having problems with
> breakpoints.
>
> The first break point I set went straight by.
> The second break point I set worked OK.
>
> I have the 'Debuggin On' in project settings.
>
>
> Regards,
> Leigh.
>
>
>