Have been using Xailer 1.3a trial for a couple of days.
So far it looks exactly what I have been looking for for years.
A couple of questions ...
1. Can I set the TAB sequence of controls ... I dont see a var for that.
If not possible, can I chnage their position in the .xfm file to do the same job.
2. In my test application which has about 4 dbfs & 3 forms ... I have lost one of the .xfm files on 2 occasions.
Is there a bug somewhere in the IDE that lets this happen ??
I will probably buy the Pro version on what I have seen so far.
Lots more questions as time goes on.
Regards
Chris Gillard
Chris Gillard
Blue Square Software
02380 458737
www.bluesquare.co.uk
In order for this site to work correctly we need to store a small file (called a cookie) on your computer. Most every site in the world does this, however since the 25th of May 2011, by law we have to get your permission first. Please abandon the forum if you disagree.
Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.
Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.
2 Questions ...TAB sequence lost .xfm?
-
ChrisGillard
- Mensajes: 384
- Registrado: Mar May 01, 2007 5:49 pm
2 Questions ...TAB sequence lost .xfm?
Chris,
> Have been using Xailer 1.3a trial for a couple of days.
>
> So far it looks exactly what I have been looking for for years.
Glad to hear that !
> 1. Can I set the TAB sequence of controls ... I dont see a var for that.
> If not possible, can I chnage their position in the .xfm file to do the same job.
Yes, it is possible. Look at the object inspector and you will see two
green arrows (up and down), just select the control you want to change and
press the arrows. It will change its place in the tree and in the tab order.
> 2. In my test application which has about 4 dbfs & 3 forms ... I have lost one of the .xfm files on 2 occasions.
> Is there a bug somewhere in the IDE that lets this happen ??
It happened to me too one time, however I am not able to replicate it step
by step so we can fix it.
> I will probably buy the Pro version on what I have seen so far.
Welcome to a growing comunity
> Lots more questions as time goes on.
Don't hesitate to ask whatever doubt you have.
Saludos,
José Lalín
> Have been using Xailer 1.3a trial for a couple of days.
>
> So far it looks exactly what I have been looking for for years.
Glad to hear that !
> 1. Can I set the TAB sequence of controls ... I dont see a var for that.
> If not possible, can I chnage their position in the .xfm file to do the same job.
Yes, it is possible. Look at the object inspector and you will see two
green arrows (up and down), just select the control you want to change and
press the arrows. It will change its place in the tree and in the tab order.
> 2. In my test application which has about 4 dbfs & 3 forms ... I have lost one of the .xfm files on 2 occasions.
> Is there a bug somewhere in the IDE that lets this happen ??
It happened to me too one time, however I am not able to replicate it step
by step so we can fix it.
> I will probably buy the Pro version on what I have seen so far.
Welcome to a growing comunity
> Lots more questions as time goes on.
Don't hesitate to ask whatever doubt you have.
Saludos,
José Lalín
2 Questions ...TAB sequence lost .xfm?
Chris,
> 2. In my test application which has about 4 dbfs & 3 forms ...
> I have lost one of the .xfm files on 2 occasions.
> Is there a bug somewhere in the IDE that lets this happen ??
We've detected that it could happens if you try to compile while project is
still loading, and we're going to fix it.
--
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info
> 2. In my test application which has about 4 dbfs & 3 forms ...
> I have lost one of the .xfm files on 2 occasions.
> Is there a bug somewhere in the IDE that lets this happen ??
We've detected that it could happens if you try to compile while project is
still loading, and we're going to fix it.
--
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info
-
ChrisGillard
- Mensajes: 384
- Registrado: Mar May 01, 2007 5:49 pm
2 Questions ...TAB sequence lost .xfm?
Jose,
Possibly I have been doing this ... very impatient.
I will slow down a bit.
Chris
Chris Gillard
Blue Square Software
02380 458737
www.bluesquare.co.uk
On Wed, 2 May 2007 10:03:25 +0100, Jose F. Gimenez wrote:
> Chris,
>
>> 2. In my test application which has about 4 dbfs & 3 forms ... I
>> have lost one of the .xfm files on 2 occasions.
>> Is there a bug somewhere in the IDE that lets this happen ??
>>
> We've detected that it could happens if you try to compile while
> project is still loading, and we're going to fix it.
Possibly I have been doing this ... very impatient.
I will slow down a bit.
Chris
Chris Gillard
Blue Square Software
02380 458737
www.bluesquare.co.uk
On Wed, 2 May 2007 10:03:25 +0100, Jose F. Gimenez wrote:
> Chris,
>
>> 2. In my test application which has about 4 dbfs & 3 forms ... I
>> have lost one of the .xfm files on 2 occasions.
>> Is there a bug somewhere in the IDE that lets this happen ??
>>
> We've detected that it could happens if you try to compile while
> project is still loading, and we're going to fix it.