Hello Ignacio
After updating to the last version (2.0.16) the ide Tools option stop
working. As you can see in atached photos, after closing the ide,
garbages characters ("e and ''') added to the end and start of tools
definitions,causing the tools stop working.
TIA
DIONISIS
--
In order for this site to work correctly we need to store a small file (called a cookie) on your computer. Most every site in the world does this, however since the 25th of May 2011, by law we have to get your permission first. Please abandon the forum if you disagree.
Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.
Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.
Problem with IDE Tools in with new update (2.0.16)
-
ignacio
- Site Admin
- Mensajes: 9469
- Registrado: Lun Abr 06, 2015 8:00 pm
- Ubicación: Madrid, Spain
- Contactar:
Problem with IDE Tools in with new update (2.0.16)
Dionisis,
Please take a look at the Tools section on Xailer.cfg to see if is an IDE or
a disk problem. TIA.
Regards,
--
Ignacio Ortiz de Zúñiga
[Equipo de Xailer/Xailer team]
http://www.xailer.com
http://www.xailer.info
"Dionisis Divaris" <support.sgs@gmail.com> escribió en el mensaje de
noticias:[email=4bbeb8fe@svctag-j7w3v3j....]4bbeb8fe@svctag-j7w3v3j....[/email]
> Hello Ignacio
>
> After updating to the last version (2.0.16) the ide Tools option stop
> working. As you can see in atached photos, after closing the ide,
> garbages characters ("e and ''') added to the end and start of tools
> definitions,causing the tools stop working.
>
> TIA
> DIONISIS
>
Please take a look at the Tools section on Xailer.cfg to see if is an IDE or
a disk problem. TIA.
Regards,
--
Ignacio Ortiz de Zúñiga
[Equipo de Xailer/Xailer team]
http://www.xailer.com
http://www.xailer.info
"Dionisis Divaris" <support.sgs@gmail.com> escribió en el mensaje de
noticias:[email=4bbeb8fe@svctag-j7w3v3j....]4bbeb8fe@svctag-j7w3v3j....[/email]
> Hello Ignacio
>
> After updating to the last version (2.0.16) the ide Tools option stop
> working. As you can see in atached photos, after closing the ide,
> garbages characters ("e and ''') added to the end and start of tools
> definitions,causing the tools stop working.
>
> TIA
> DIONISIS
>
Ignacio Ortiz de Zúñiga
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
-
ignacio
- Site Admin
- Mensajes: 9469
- Registrado: Lun Abr 06, 2015 8:00 pm
- Ubicación: Madrid, Spain
- Contactar:
Problem with IDE Tools in with new update (2.0.16)
Dionisis,
Please take a look at the Tools section on Xailer.cfg to see if is an IDE or
a disk problem. TIA.
Regards,
--
Ignacio Ortiz de Zúñiga
[Equipo de Xailer/Xailer team]
http://www.xailer.com
http://www.xailer.info
"Dionisis Divaris" <support.sgs@gmail.com> escribió en el mensaje de
noticias:[email=4bbeb8fe@svctag-j7w3v3j....]4bbeb8fe@svctag-j7w3v3j....[/email]
> Hello Ignacio
>
> After updating to the last version (2.0.16) the ide Tools option stop
> working. As you can see in atached photos, after closing the ide,
> garbages characters ("e and ''') added to the end and start of tools
> definitions,causing the tools stop working.
>
> TIA
> DIONISIS
>
Please take a look at the Tools section on Xailer.cfg to see if is an IDE or
a disk problem. TIA.
Regards,
--
Ignacio Ortiz de Zúñiga
[Equipo de Xailer/Xailer team]
http://www.xailer.com
http://www.xailer.info
"Dionisis Divaris" <support.sgs@gmail.com> escribió en el mensaje de
noticias:[email=4bbeb8fe@svctag-j7w3v3j....]4bbeb8fe@svctag-j7w3v3j....[/email]
> Hello Ignacio
>
> After updating to the last version (2.0.16) the ide Tools option stop
> working. As you can see in atached photos, after closing the ide,
> garbages characters ("e and ''') added to the end and start of tools
> definitions,causing the tools stop working.
>
> TIA
> DIONISIS
>
Ignacio Ortiz de Zúñiga
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
-
ignacio
- Site Admin
- Mensajes: 9469
- Registrado: Lun Abr 06, 2015 8:00 pm
- Ubicación: Madrid, Spain
- Contactar:
Problem with IDE Tools in with new update (2.0.16)
Dionisis,
The problem probably has arise due some modifications on previous upgrades
but we believe that with the latest version it should be OK. But the
configuration string may become corrupted. Please try to fix them from the
IDE or editing Xailer.cfg and see if it happens again. Sorry for any
inconvenience.
Regards,
--
Ignacio Ortiz de Zúñiga
[Equipo de Xailer/Xailer team]
http://www.xailer.com
http://www.xailer.info
"Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> escribió en el
mensaje de noticias:4bbed843$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
> Dionisis,
>
> Please take a look at the Tools section on Xailer.cfg to see if is an IDE
> or a disk problem. TIA.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> [Equipo de Xailer/Xailer team]
> http://www.xailer.com
> http://www.xailer.info
>
> "Dionisis Divaris" <support.sgs@gmail.com> escribió en el mensaje de
> noticias:[email=4bbeb8fe@svctag-j7w3v3j....]4bbeb8fe@svctag-j7w3v3j....[/email]
>> Hello Ignacio
>>
>> After updating to the last version (2.0.16) the ide Tools option stop
>> working. As you can see in atached photos, after closing the ide,
>> garbages characters ("e and ''') added to the end and start of tools
>> definitions,causing the tools stop working.
>>
>> TIA
>> DIONISIS
>>
The problem probably has arise due some modifications on previous upgrades
but we believe that with the latest version it should be OK. But the
configuration string may become corrupted. Please try to fix them from the
IDE or editing Xailer.cfg and see if it happens again. Sorry for any
inconvenience.
Regards,
--
Ignacio Ortiz de Zúñiga
[Equipo de Xailer/Xailer team]
http://www.xailer.com
http://www.xailer.info
"Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> escribió en el
mensaje de noticias:4bbed843$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
> Dionisis,
>
> Please take a look at the Tools section on Xailer.cfg to see if is an IDE
> or a disk problem. TIA.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> [Equipo de Xailer/Xailer team]
> http://www.xailer.com
> http://www.xailer.info
>
> "Dionisis Divaris" <support.sgs@gmail.com> escribió en el mensaje de
> noticias:[email=4bbeb8fe@svctag-j7w3v3j....]4bbeb8fe@svctag-j7w3v3j....[/email]
>> Hello Ignacio
>>
>> After updating to the last version (2.0.16) the ide Tools option stop
>> working. As you can see in atached photos, after closing the ide,
>> garbages characters ("e and ''') added to the end and start of tools
>> definitions,causing the tools stop working.
>>
>> TIA
>> DIONISIS
>>
Ignacio Ortiz de Zúñiga
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
-
ignacio
- Site Admin
- Mensajes: 9469
- Registrado: Lun Abr 06, 2015 8:00 pm
- Ubicación: Madrid, Spain
- Contactar:
Problem with IDE Tools in with new update (2.0.16)
Dionisis,
The problem probably has arise due some modifications on previous upgrades
but we believe that with the latest version it should be OK. But the
configuration string may become corrupted. Please try to fix them from the
IDE or editing Xailer.cfg and see if it happens again. Sorry for any
inconvenience.
Regards,
--
Ignacio Ortiz de Zúñiga
[Equipo de Xailer/Xailer team]
http://www.xailer.com
http://www.xailer.info
"Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> escribió en el
mensaje de noticias:4bbed843$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
> Dionisis,
>
> Please take a look at the Tools section on Xailer.cfg to see if is an IDE
> or a disk problem. TIA.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> [Equipo de Xailer/Xailer team]
> http://www.xailer.com
> http://www.xailer.info
>
> "Dionisis Divaris" <support.sgs@gmail.com> escribió en el mensaje de
> noticias:[email=4bbeb8fe@svctag-j7w3v3j....]4bbeb8fe@svctag-j7w3v3j....[/email]
>> Hello Ignacio
>>
>> After updating to the last version (2.0.16) the ide Tools option stop
>> working. As you can see in atached photos, after closing the ide,
>> garbages characters ("e and ''') added to the end and start of tools
>> definitions,causing the tools stop working.
>>
>> TIA
>> DIONISIS
>>
The problem probably has arise due some modifications on previous upgrades
but we believe that with the latest version it should be OK. But the
configuration string may become corrupted. Please try to fix them from the
IDE or editing Xailer.cfg and see if it happens again. Sorry for any
inconvenience.
Regards,
--
Ignacio Ortiz de Zúñiga
[Equipo de Xailer/Xailer team]
http://www.xailer.com
http://www.xailer.info
"Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> escribió en el
mensaje de noticias:4bbed843$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
> Dionisis,
>
> Please take a look at the Tools section on Xailer.cfg to see if is an IDE
> or a disk problem. TIA.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> [Equipo de Xailer/Xailer team]
> http://www.xailer.com
> http://www.xailer.info
>
> "Dionisis Divaris" <support.sgs@gmail.com> escribió en el mensaje de
> noticias:[email=4bbeb8fe@svctag-j7w3v3j....]4bbeb8fe@svctag-j7w3v3j....[/email]
>> Hello Ignacio
>>
>> After updating to the last version (2.0.16) the ide Tools option stop
>> working. As you can see in atached photos, after closing the ide,
>> garbages characters ("e and ''') added to the end and start of tools
>> definitions,causing the tools stop working.
>>
>> TIA
>> DIONISIS
>>
Ignacio Ortiz de Zúñiga
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
Problem with IDE Tools in with new update (2.0.16)
Ignacio
The problem caused by IDE. When correct the cfg file namualy and execute
IDE after correction, everything is ok. When close the ide and opens again
the problems come again. It is very annoing error. Please try to correct it
because it is vey difficult to correct cfg file every time that we need to
execute xailer.
TIA
Dionsis
"Ignacio Ortiz de Zuniga" <NoNameToAvoidSpam@xailer.com> wrote in message
news:[email=4bbedfc7@svctag-j7w3v3j....]4bbedfc7@svctag-j7w3v3j....[/email]
> Dionisis,
>
> The problem probably has arise due some modifications on previous upgrades
> but we believe that with the latest version it should be OK. But the
> configuration string may become corrupted. Please try to fix them from the
> IDE or editing Xailer.cfg and see if it happens again. Sorry for any
> inconvenience.
>
> Regards,
>
> --
> Ignacio Ortiz de Zuniga
> [Equipo de Xailer/Xailer team]
> http://www.xailer.com
> http://www.xailer.info
>
> "Ignacio Ortiz de Zuniga" <NoNameToAvoidSpam@xailer.com> escribio en el
> mensaje de noticias:4bbed843$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>> Dionisis,
>>
>> Please take a look at the Tools section on Xailer.cfg to see if is an IDE
>> or a disk problem. TIA.
>>
>> Regards,
>>
>> --
>> Ignacio Ortiz de Zuniga
>> [Equipo de Xailer/Xailer team]
>> http://www.xailer.com
>> http://www.xailer.info
>>
>> "Dionisis Divaris" <support.sgs@gmail.com> escribio en el mensaje de
>> noticias:[email=4bbeb8fe@svctag-j7w3v3j....]4bbeb8fe@svctag-j7w3v3j....[/email]
>>> Hello Ignacio
>>>
>>> After updating to the last version (2.0.16) the ide Tools option stop
>>> working. As you can see in atached photos, after closing the ide,
>>> garbages characters ("e and ''') added to the end and start of tools
>>> definitions,causing the tools stop working.
>>>
>>> TIA
>>> DIONISIS
>>>
The problem caused by IDE. When correct the cfg file namualy and execute
IDE after correction, everything is ok. When close the ide and opens again
the problems come again. It is very annoing error. Please try to correct it
because it is vey difficult to correct cfg file every time that we need to
execute xailer.
TIA
Dionsis
"Ignacio Ortiz de Zuniga" <NoNameToAvoidSpam@xailer.com> wrote in message
news:[email=4bbedfc7@svctag-j7w3v3j....]4bbedfc7@svctag-j7w3v3j....[/email]
> Dionisis,
>
> The problem probably has arise due some modifications on previous upgrades
> but we believe that with the latest version it should be OK. But the
> configuration string may become corrupted. Please try to fix them from the
> IDE or editing Xailer.cfg and see if it happens again. Sorry for any
> inconvenience.
>
> Regards,
>
> --
> Ignacio Ortiz de Zuniga
> [Equipo de Xailer/Xailer team]
> http://www.xailer.com
> http://www.xailer.info
>
> "Ignacio Ortiz de Zuniga" <NoNameToAvoidSpam@xailer.com> escribio en el
> mensaje de noticias:4bbed843$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>> Dionisis,
>>
>> Please take a look at the Tools section on Xailer.cfg to see if is an IDE
>> or a disk problem. TIA.
>>
>> Regards,
>>
>> --
>> Ignacio Ortiz de Zuniga
>> [Equipo de Xailer/Xailer team]
>> http://www.xailer.com
>> http://www.xailer.info
>>
>> "Dionisis Divaris" <support.sgs@gmail.com> escribio en el mensaje de
>> noticias:[email=4bbeb8fe@svctag-j7w3v3j....]4bbeb8fe@svctag-j7w3v3j....[/email]
>>> Hello Ignacio
>>>
>>> After updating to the last version (2.0.16) the ide Tools option stop
>>> working. As you can see in atached photos, after closing the ide,
>>> garbages characters ("e and ''') added to the end and start of tools
>>> definitions,causing the tools stop working.
>>>
>>> TIA
>>> DIONISIS
>>>
Problem with IDE Tools in with new update (2.0.16)
Ignacio
The problem caused by IDE. When correct the cfg file namualy and execute
IDE after correction, everything is ok. When close the ide and opens again
the problems come again. It is very annoing error. Please try to correct it
because it is vey difficult to correct cfg file every time that we need to
execute xailer.
TIA
Dionsis
"Ignacio Ortiz de Zuniga" <NoNameToAvoidSpam@xailer.com> wrote in message
news:[email=4bbedfc7@svctag-j7w3v3j....]4bbedfc7@svctag-j7w3v3j....[/email]
> Dionisis,
>
> The problem probably has arise due some modifications on previous upgrades
> but we believe that with the latest version it should be OK. But the
> configuration string may become corrupted. Please try to fix them from the
> IDE or editing Xailer.cfg and see if it happens again. Sorry for any
> inconvenience.
>
> Regards,
>
> --
> Ignacio Ortiz de Zuniga
> [Equipo de Xailer/Xailer team]
> http://www.xailer.com
> http://www.xailer.info
>
> "Ignacio Ortiz de Zuniga" <NoNameToAvoidSpam@xailer.com> escribio en el
> mensaje de noticias:4bbed843$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>> Dionisis,
>>
>> Please take a look at the Tools section on Xailer.cfg to see if is an IDE
>> or a disk problem. TIA.
>>
>> Regards,
>>
>> --
>> Ignacio Ortiz de Zuniga
>> [Equipo de Xailer/Xailer team]
>> http://www.xailer.com
>> http://www.xailer.info
>>
>> "Dionisis Divaris" <support.sgs@gmail.com> escribio en el mensaje de
>> noticias:[email=4bbeb8fe@svctag-j7w3v3j....]4bbeb8fe@svctag-j7w3v3j....[/email]
>>> Hello Ignacio
>>>
>>> After updating to the last version (2.0.16) the ide Tools option stop
>>> working. As you can see in atached photos, after closing the ide,
>>> garbages characters ("e and ''') added to the end and start of tools
>>> definitions,causing the tools stop working.
>>>
>>> TIA
>>> DIONISIS
>>>
The problem caused by IDE. When correct the cfg file namualy and execute
IDE after correction, everything is ok. When close the ide and opens again
the problems come again. It is very annoing error. Please try to correct it
because it is vey difficult to correct cfg file every time that we need to
execute xailer.
TIA
Dionsis
"Ignacio Ortiz de Zuniga" <NoNameToAvoidSpam@xailer.com> wrote in message
news:[email=4bbedfc7@svctag-j7w3v3j....]4bbedfc7@svctag-j7w3v3j....[/email]
> Dionisis,
>
> The problem probably has arise due some modifications on previous upgrades
> but we believe that with the latest version it should be OK. But the
> configuration string may become corrupted. Please try to fix them from the
> IDE or editing Xailer.cfg and see if it happens again. Sorry for any
> inconvenience.
>
> Regards,
>
> --
> Ignacio Ortiz de Zuniga
> [Equipo de Xailer/Xailer team]
> http://www.xailer.com
> http://www.xailer.info
>
> "Ignacio Ortiz de Zuniga" <NoNameToAvoidSpam@xailer.com> escribio en el
> mensaje de noticias:4bbed843$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>> Dionisis,
>>
>> Please take a look at the Tools section on Xailer.cfg to see if is an IDE
>> or a disk problem. TIA.
>>
>> Regards,
>>
>> --
>> Ignacio Ortiz de Zuniga
>> [Equipo de Xailer/Xailer team]
>> http://www.xailer.com
>> http://www.xailer.info
>>
>> "Dionisis Divaris" <support.sgs@gmail.com> escribio en el mensaje de
>> noticias:[email=4bbeb8fe@svctag-j7w3v3j....]4bbeb8fe@svctag-j7w3v3j....[/email]
>>> Hello Ignacio
>>>
>>> After updating to the last version (2.0.16) the ide Tools option stop
>>> working. As you can see in atached photos, after closing the ide,
>>> garbages characters ("e and ''') added to the end and start of tools
>>> definitions,causing the tools stop working.
>>>
>>> TIA
>>> DIONISIS
>>>
Problem with IDE Tools in with new update (2.0.16)
Ignacio,
Dionisis is right.
It is an IDE bug in the last update. But it works by the toolbarmenu.
Regards
Ingo
"Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> schrieb im
Newsbeitrag news:[email=4bbedfc7@svctag-j7w3v3j....]4bbedfc7@svctag-j7w3v3j....[/email]
> Dionisis,
>
> The problem probably has arise due some modifications on previous upgrades
> but we believe that with the latest version it should be OK. But the
> configuration string may become corrupted. Please try to fix them from the
> IDE or editing Xailer.cfg and see if it happens again. Sorry for any
> inconvenience.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> [Equipo de Xailer/Xailer team]
> http://www.xailer.com
> http://www.xailer.info
>
> "Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> escribió en el
> mensaje de noticias:4bbed843$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>> Dionisis,
>>
>> Please take a look at the Tools section on Xailer.cfg to see if is an IDE
>> or a disk problem. TIA.
>>
>> Regards,
>>
>> --
>> Ignacio Ortiz de Zúñiga
>> [Equipo de Xailer/Xailer team]
>> http://www.xailer.com
>> http://www.xailer.info
>>
>> "Dionisis Divaris" <support.sgs@gmail.com> escribió en el mensaje de
>> noticias:[email=4bbeb8fe@svctag-j7w3v3j....]4bbeb8fe@svctag-j7w3v3j....[/email]
>>> Hello Ignacio
>>>
>>> After updating to the last version (2.0.16) the ide Tools option stop
>>> working. As you can see in atached photos, after closing the ide,
>>> garbages characters ("e and ''') added to the end and start of tools
>>> definitions,causing the tools stop working.
>>>
>>> TIA
>>> DIONISIS
>>>
Dionisis is right.
It is an IDE bug in the last update. But it works by the toolbarmenu.
Regards
Ingo
"Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> schrieb im
Newsbeitrag news:[email=4bbedfc7@svctag-j7w3v3j....]4bbedfc7@svctag-j7w3v3j....[/email]
> Dionisis,
>
> The problem probably has arise due some modifications on previous upgrades
> but we believe that with the latest version it should be OK. But the
> configuration string may become corrupted. Please try to fix them from the
> IDE or editing Xailer.cfg and see if it happens again. Sorry for any
> inconvenience.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> [Equipo de Xailer/Xailer team]
> http://www.xailer.com
> http://www.xailer.info
>
> "Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> escribió en el
> mensaje de noticias:4bbed843$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>> Dionisis,
>>
>> Please take a look at the Tools section on Xailer.cfg to see if is an IDE
>> or a disk problem. TIA.
>>
>> Regards,
>>
>> --
>> Ignacio Ortiz de Zúñiga
>> [Equipo de Xailer/Xailer team]
>> http://www.xailer.com
>> http://www.xailer.info
>>
>> "Dionisis Divaris" <support.sgs@gmail.com> escribió en el mensaje de
>> noticias:[email=4bbeb8fe@svctag-j7w3v3j....]4bbeb8fe@svctag-j7w3v3j....[/email]
>>> Hello Ignacio
>>>
>>> After updating to the last version (2.0.16) the ide Tools option stop
>>> working. As you can see in atached photos, after closing the ide,
>>> garbages characters ("e and ''') added to the end and start of tools
>>> definitions,causing the tools stop working.
>>>
>>> TIA
>>> DIONISIS
>>>
Problem with IDE Tools in with new update (2.0.16)
Ignacio,
Dionisis is right.
It is an IDE bug in the last update. But it works by the toolbarmenu.
Regards
Ingo
"Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> schrieb im
Newsbeitrag news:[email=4bbedfc7@svctag-j7w3v3j....]4bbedfc7@svctag-j7w3v3j....[/email]
> Dionisis,
>
> The problem probably has arise due some modifications on previous upgrades
> but we believe that with the latest version it should be OK. But the
> configuration string may become corrupted. Please try to fix them from the
> IDE or editing Xailer.cfg and see if it happens again. Sorry for any
> inconvenience.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> [Equipo de Xailer/Xailer team]
> http://www.xailer.com
> http://www.xailer.info
>
> "Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> escribió en el
> mensaje de noticias:4bbed843$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>> Dionisis,
>>
>> Please take a look at the Tools section on Xailer.cfg to see if is an IDE
>> or a disk problem. TIA.
>>
>> Regards,
>>
>> --
>> Ignacio Ortiz de Zúñiga
>> [Equipo de Xailer/Xailer team]
>> http://www.xailer.com
>> http://www.xailer.info
>>
>> "Dionisis Divaris" <support.sgs@gmail.com> escribió en el mensaje de
>> noticias:[email=4bbeb8fe@svctag-j7w3v3j....]4bbeb8fe@svctag-j7w3v3j....[/email]
>>> Hello Ignacio
>>>
>>> After updating to the last version (2.0.16) the ide Tools option stop
>>> working. As you can see in atached photos, after closing the ide,
>>> garbages characters ("e and ''') added to the end and start of tools
>>> definitions,causing the tools stop working.
>>>
>>> TIA
>>> DIONISIS
>>>
Dionisis is right.
It is an IDE bug in the last update. But it works by the toolbarmenu.
Regards
Ingo
"Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> schrieb im
Newsbeitrag news:[email=4bbedfc7@svctag-j7w3v3j....]4bbedfc7@svctag-j7w3v3j....[/email]
> Dionisis,
>
> The problem probably has arise due some modifications on previous upgrades
> but we believe that with the latest version it should be OK. But the
> configuration string may become corrupted. Please try to fix them from the
> IDE or editing Xailer.cfg and see if it happens again. Sorry for any
> inconvenience.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> [Equipo de Xailer/Xailer team]
> http://www.xailer.com
> http://www.xailer.info
>
> "Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> escribió en el
> mensaje de noticias:4bbed843$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>> Dionisis,
>>
>> Please take a look at the Tools section on Xailer.cfg to see if is an IDE
>> or a disk problem. TIA.
>>
>> Regards,
>>
>> --
>> Ignacio Ortiz de Zúñiga
>> [Equipo de Xailer/Xailer team]
>> http://www.xailer.com
>> http://www.xailer.info
>>
>> "Dionisis Divaris" <support.sgs@gmail.com> escribió en el mensaje de
>> noticias:[email=4bbeb8fe@svctag-j7w3v3j....]4bbeb8fe@svctag-j7w3v3j....[/email]
>>> Hello Ignacio
>>>
>>> After updating to the last version (2.0.16) the ide Tools option stop
>>> working. As you can see in atached photos, after closing the ide,
>>> garbages characters ("e and ''') added to the end and start of tools
>>> definitions,causing the tools stop working.
>>>
>>> TIA
>>> DIONISIS
>>>