Ignacio,
I am a registered user with two registered machines.
I installed the new release on my registered machine named "Dell" but the
sourcefiles wouldn't be decompressed.
Decompressing the source.zip manually needs to input a password on each
single file.
How to make the sourcefiles available?
Regards
Ingo
In order for this site to work correctly we need to store a small file (called a cookie) on your computer. Most every site in the world does this, however since the 25th of May 2011, by law we have to get your permission first. Please abandon the forum if you disagree.
Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.
Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.
Sourcefiles of the new release are not available
-
ignacio
- Site Admin
- Mensajes: 9469
- Registrado: Lun Abr 06, 2015 8:00 pm
- Ubicación: Madrid, Spain
- Contactar:
Sourcefiles of the new release are not available
Ingo,
We are working right now on that problem. BTW, you can do the following to
get the source code:
1) Copy any xailer.exe from previous version to the xailerbin directory
but with a different name, for example, 'oldxailer.exe'
2) Run that file
3) Close the program
4) Delete the file
The souce file should be decompressed. Any feedback is welcome.
Regards,
--
Ignacio Ortiz de Zúñiga
Xailer support / Soporte de Xailer
http://www.xailer.com
http://www.xailer.info
"Ingo" <support@mandantwin.com> escribió en el mensaje
news:4a6d5f1a$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
> Ignacio,
>
> I am a registered user with two registered machines.
> I installed the new release on my registered machine named "Dell" but the
> sourcefiles wouldn't be decompressed.
> Decompressing the source.zip manually needs to input a password on each
> single file.
>
> How to make the sourcefiles available?
>
> Regards
>
> Ingo
>
We are working right now on that problem. BTW, you can do the following to
get the source code:
1) Copy any xailer.exe from previous version to the xailerbin directory
but with a different name, for example, 'oldxailer.exe'
2) Run that file
3) Close the program
4) Delete the file
The souce file should be decompressed. Any feedback is welcome.
Regards,
--
Ignacio Ortiz de Zúñiga
Xailer support / Soporte de Xailer
http://www.xailer.com
http://www.xailer.info
"Ingo" <support@mandantwin.com> escribió en el mensaje
news:4a6d5f1a$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
> Ignacio,
>
> I am a registered user with two registered machines.
> I installed the new release on my registered machine named "Dell" but the
> sourcefiles wouldn't be decompressed.
> Decompressing the source.zip manually needs to input a password on each
> single file.
>
> How to make the sourcefiles available?
>
> Regards
>
> Ingo
>
Ignacio Ortiz de Zúñiga
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
-
ignacio
- Site Admin
- Mensajes: 9469
- Registrado: Lun Abr 06, 2015 8:00 pm
- Ubicación: Madrid, Spain
- Contactar:
Sourcefiles of the new release are not available
Ingo,
We are working right now on that problem. BTW, you can do the following to
get the source code:
1) Copy any xailer.exe from previous version to the xailerbin directory
but with a different name, for example, 'oldxailer.exe'
2) Run that file
3) Close the program
4) Delete the file
The souce file should be decompressed. Any feedback is welcome.
Regards,
--
Ignacio Ortiz de Zúñiga
Xailer support / Soporte de Xailer
http://www.xailer.com
http://www.xailer.info
"Ingo" <support@mandantwin.com> escribió en el mensaje
news:4a6d5f1a$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
> Ignacio,
>
> I am a registered user with two registered machines.
> I installed the new release on my registered machine named "Dell" but the
> sourcefiles wouldn't be decompressed.
> Decompressing the source.zip manually needs to input a password on each
> single file.
>
> How to make the sourcefiles available?
>
> Regards
>
> Ingo
>
We are working right now on that problem. BTW, you can do the following to
get the source code:
1) Copy any xailer.exe from previous version to the xailerbin directory
but with a different name, for example, 'oldxailer.exe'
2) Run that file
3) Close the program
4) Delete the file
The souce file should be decompressed. Any feedback is welcome.
Regards,
--
Ignacio Ortiz de Zúñiga
Xailer support / Soporte de Xailer
http://www.xailer.com
http://www.xailer.info
"Ingo" <support@mandantwin.com> escribió en el mensaje
news:4a6d5f1a$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
> Ignacio,
>
> I am a registered user with two registered machines.
> I installed the new release on my registered machine named "Dell" but the
> sourcefiles wouldn't be decompressed.
> Decompressing the source.zip manually needs to input a password on each
> single file.
>
> How to make the sourcefiles available?
>
> Regards
>
> Ingo
>
Ignacio Ortiz de Zúñiga
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
Sourcefiles of the new release are not available
Ignacio,
on this way it works.
Regards
Ingo
"Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> schrieb im
Newsbeitrag news:[email=4a6d7de6@svctag-j7w3v3j....]4a6d7de6@svctag-j7w3v3j....[/email]
> Ingo,
>
> We are working right now on that problem. BTW, you can do the following to
> get the source code:
>
> 1) Copy any xailer.exe from previous version to the xailerbin directory
> but with a different name, for example, 'oldxailer.exe'
> 2) Run that file
> 3) Close the program
> 4) Delete the file
>
> The souce file should be decompressed. Any feedback is welcome.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> Xailer support / Soporte de Xailer
> http://www.xailer.com
> http://www.xailer.info
> "Ingo" <support@mandantwin.com> escribió en el mensaje
> news:4a6d5f1a$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>> Ignacio,
>>
>> I am a registered user with two registered machines.
>> I installed the new release on my registered machine named "Dell" but the
>> sourcefiles wouldn't be decompressed.
>> Decompressing the source.zip manually needs to input a password on each
>> single file.
>>
>> How to make the sourcefiles available?
>>
>> Regards
>>
>> Ingo
>>
>
>
on this way it works.
Regards
Ingo
"Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> schrieb im
Newsbeitrag news:[email=4a6d7de6@svctag-j7w3v3j....]4a6d7de6@svctag-j7w3v3j....[/email]
> Ingo,
>
> We are working right now on that problem. BTW, you can do the following to
> get the source code:
>
> 1) Copy any xailer.exe from previous version to the xailerbin directory
> but with a different name, for example, 'oldxailer.exe'
> 2) Run that file
> 3) Close the program
> 4) Delete the file
>
> The souce file should be decompressed. Any feedback is welcome.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> Xailer support / Soporte de Xailer
> http://www.xailer.com
> http://www.xailer.info
> "Ingo" <support@mandantwin.com> escribió en el mensaje
> news:4a6d5f1a$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>> Ignacio,
>>
>> I am a registered user with two registered machines.
>> I installed the new release on my registered machine named "Dell" but the
>> sourcefiles wouldn't be decompressed.
>> Decompressing the source.zip manually needs to input a password on each
>> single file.
>>
>> How to make the sourcefiles available?
>>
>> Regards
>>
>> Ingo
>>
>
>
Sourcefiles of the new release are not available
Ignacio,
on this way it works.
Regards
Ingo
"Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> schrieb im
Newsbeitrag news:[email=4a6d7de6@svctag-j7w3v3j....]4a6d7de6@svctag-j7w3v3j....[/email]
> Ingo,
>
> We are working right now on that problem. BTW, you can do the following to
> get the source code:
>
> 1) Copy any xailer.exe from previous version to the xailerbin directory
> but with a different name, for example, 'oldxailer.exe'
> 2) Run that file
> 3) Close the program
> 4) Delete the file
>
> The souce file should be decompressed. Any feedback is welcome.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> Xailer support / Soporte de Xailer
> http://www.xailer.com
> http://www.xailer.info
> "Ingo" <support@mandantwin.com> escribió en el mensaje
> news:4a6d5f1a$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>> Ignacio,
>>
>> I am a registered user with two registered machines.
>> I installed the new release on my registered machine named "Dell" but the
>> sourcefiles wouldn't be decompressed.
>> Decompressing the source.zip manually needs to input a password on each
>> single file.
>>
>> How to make the sourcefiles available?
>>
>> Regards
>>
>> Ingo
>>
>
>
on this way it works.
Regards
Ingo
"Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> schrieb im
Newsbeitrag news:[email=4a6d7de6@svctag-j7w3v3j....]4a6d7de6@svctag-j7w3v3j....[/email]
> Ingo,
>
> We are working right now on that problem. BTW, you can do the following to
> get the source code:
>
> 1) Copy any xailer.exe from previous version to the xailerbin directory
> but with a different name, for example, 'oldxailer.exe'
> 2) Run that file
> 3) Close the program
> 4) Delete the file
>
> The souce file should be decompressed. Any feedback is welcome.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> Xailer support / Soporte de Xailer
> http://www.xailer.com
> http://www.xailer.info
> "Ingo" <support@mandantwin.com> escribió en el mensaje
> news:4a6d5f1a$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>> Ignacio,
>>
>> I am a registered user with two registered machines.
>> I installed the new release on my registered machine named "Dell" but the
>> sourcefiles wouldn't be decompressed.
>> Decompressing the source.zip manually needs to input a password on each
>> single file.
>>
>> How to make the sourcefiles available?
>>
>> Regards
>>
>> Ingo
>>
>
>