Multiple edit in DBFBrowse

[Oleg]

Hi all!
I have an oDBFBrowse with 4 columns. The columns have the following
:nEditType:
1 - beGET, 2 - beGET, 3 - beNONE, 4 - beGET. I call oDBFBrowse:Edit() to do
multiple edit of all columns.
When I am at the column 2 and press Tab or Enter to skip to the next
editable column (column 4), the cursor does not skip.
Is this correct? How to workaround this?
Regards, Oleg

[ignacio]

Oleg,
Is not correct. Is column 4 completely visible? Check it please. If it is,
please tell us wich Xailer sample may be used to test the problem. TIA.
Regards,
--
Ignacio Ortiz de Zúñiga
[Soporte Xailer]
[Xailer support]
"Oleg" <info@cluster.samara.ru> escribió en el mensaje
news:[email=48ae5893@ozsrv2.ozlan.local...]48ae5893@ozsrv2.ozlan.local...[/email]
> Hi all!
>
> I have an oDBFBrowse with 4 columns. The columns have the following
> :nEditType:
> 1 - beGET, 2 - beGET, 3 - beNONE, 4 - beGET. I call oDBFBrowse:Edit() to
> do multiple edit of all columns.
> When I am at the column 2 and press Tab or Enter to skip to the next
> editable column (column 4), the cursor does not skip.
>
> Is this correct? How to workaround this?
>
> Regards, Oleg
>

[NoName]

Oleg,
Is not correct. Is column 4 completely visible? Check it please. If it is,
please tell us wich Xailer sample may be used to test the problem. TIA.
Regards,
--
Ignacio Ortiz de Zúñiga
[Soporte Xailer]
[Xailer support]
"Oleg" <info@cluster.samara.ru> escribió en el mensaje
news:[email=48ae5893@ozsrv2.ozlan.local...]48ae5893@ozsrv2.ozlan.local...[/email]
> Hi all!
>
> I have an oDBFBrowse with 4 columns. The columns have the following
> :nEditType:
> 1 - beGET, 2 - beGET, 3 - beNONE, 4 - beGET. I call oDBFBrowse:Edit() to
> do multiple edit of all columns.
> When I am at the column 2 and press Tab or Enter to skip to the next
> editable column (column 4), the cursor does not skip.
>
> Is this correct? How to workaround this?
>
> Regards, Oleg
>

[Ingo JH]

Oleg,
I can't confirm it. I tried it with the BrwEdit-sample by disableing the
third column. It works perfectly. The cursor jumps over the third column to
the fourth oGridEdit as it should.
Regards
ingo
"Oleg" <info@cluster.samara.ru> schrieb im Newsbeitrag
news:[email=48ae5893@ozsrv2.ozlan.local...]48ae5893@ozsrv2.ozlan.local...[/email]
> Hi all!
>
> I have an oDBFBrowse with 4 columns. The columns have the following
> :nEditType:
> 1 - beGET, 2 - beGET, 3 - beNONE, 4 - beGET. I call oDBFBrowse:Edit() to
> do multiple edit of all columns.
> When I am at the column 2 and press Tab or Enter to skip to the next
> editable column (column 4), the cursor does not skip.
>
> Is this correct? How to workaround this?
>
> Regards, Oleg
>

[Ingo JH]

Oleg,
I can't confirm it. I tried it with the BrwEdit-sample by disableing the
third column. It works perfectly. The cursor jumps over the third column to
the fourth oGridEdit as it should.
Regards
ingo
"Oleg" <info@cluster.samara.ru> schrieb im Newsbeitrag
news:[email=48ae5893@ozsrv2.ozlan.local...]48ae5893@ozsrv2.ozlan.local...[/email]
> Hi all!
>
> I have an oDBFBrowse with 4 columns. The columns have the following
> :nEditType:
> 1 - beGET, 2 - beGET, 3 - beNONE, 4 - beGET. I call oDBFBrowse:Edit() to
> do multiple edit of all columns.
> When I am at the column 2 and press Tab or Enter to skip to the next
> editable column (column 4), the cursor does not skip.
>
> Is this correct? How to workaround this?
>
> Regards, Oleg
>

[Oleg]

Ignacio, Ingo!
I solve my problem, it seems that it was my fault.
It is strange enough that with oBrw:Edit I can edit not all but only visible
columns. For example if I have 5 columns, 3 of them are visible, and third
column's nEditType is beNONE,
then editing process is stopped at second column. But if a very small part
(several pixels) of fourth column is visible, the editing is not stopped.
Is it possible to enhance TBrowse:Edit/TBrowse:Append to edit all columns
(not only visible)?
Regards, Oleg

[Oleg]

Ignacio, Ingo!
I solve my problem, it seems that it was my fault.
It is strange enough that with oBrw:Edit I can edit not all but only visible
columns. For example if I have 5 columns, 3 of them are visible, and third
column's nEditType is beNONE,
then editing process is stopped at second column. But if a very small part
(several pixels) of fourth column is visible, the editing is not stopped.
Is it possible to enhance TBrowse:Edit/TBrowse:Append to edit all columns
(not only visible)?
Regards, Oleg

[Oleg]

Ignacio, Jose!
> Is it possible to enhance TBrowse:Edit/TBrowse:Append to edit all columns
> (not only visible)?
Can you answer?
Regards, Oleg

[Oleg]

Ignacio, Jose!
> Is it possible to enhance TBrowse:Edit/TBrowse:Append to edit all columns
> (not only visible)?
Can you answer?
Regards, Oleg

[ignacio]

Oleg,
It could be possible to do it, but I do not like it too much since the only
way to do it is forzing the visibility of the column which receives focus,
that can be fine in some circunstances, like in Excel files, but is not used
oftenly in management applications. BTW this enhancement requieres a lot of
work.
So, I can say that in the short term we will not include that enhancement.
Sorry.
Regards,
--
Ignacio Ortiz de Zúñiga
[Xailer support]
"Oleg" <info@cluster.samara.ru> escribió en el mensaje
news:48b62d77$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Ignacio, Jose!
>
>> Is it possible to enhance TBrowse:Edit/TBrowse:Append to edit all columns
>> (not only visible)?
>
> Can you answer?
>
> Regards, Oleg
>

[ignacio]

Oleg,
It could be possible to do it, but I do not like it too much since the only
way to do it is forzing the visibility of the column which receives focus,
that can be fine in some circunstances, like in Excel files, but is not used
oftenly in management applications. BTW this enhancement requieres a lot of
work.
So, I can say that in the short term we will not include that enhancement.
Sorry.
Regards,
--
Ignacio Ortiz de Zúñiga
[Xailer support]
"Oleg" <info@cluster.samara.ru> escribió en el mensaje
news:48b62d77$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Ignacio, Jose!
>
>> Is it possible to enhance TBrowse:Edit/TBrowse:Append to edit all columns
>> (not only visible)?
>
> Can you answer?
>
> Regards, Oleg
>

[Oleg]

Ignacio!
> So, I can say that in the short term we will not include that enhancement.
> Sorry.
Ok, I will do it in some other way.
Regards, Oleg

[Oleg]

Ignacio!
> So, I can say that in the short term we will not include that enhancement.
> Sorry.
Ok, I will do it in some other way.
Regards, Oleg