In order for this site to work correctly we need to store a small file (called a cookie) on your computer. Most every site in the world does this, however since the 25th of May 2011, by law we have to get your permission first. Please abandon the forum if you disagree.

Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.

How to use Debugger

Xailer professional forum in English
Responder
g.s.rogers
Mensajes: 202
Registrado: Dom Feb 17, 2008 3:35 am

How to use Debugger

Mensaje por g.s.rogers »

I need some basic info on how to see and use the Debugger window. In Project
Properties, under [x]Harbour Options, I have debug info checked.
If I run the project, then select Inspect Workareas from the run menu,
nothing happens. If I put LogDebug() in the Form onCreate event, I see the
debugger window, but everything is grayed out except Stop Program.
Obviously, I'm missing something simple in order to inspect variable and
workareas.
TIA,
Gary
Arriba
Avatar de Usuario
ignacio
Site Admin
Mensajes: 9469
Registrado: Lun Abr 06, 2015 8:00 pm
Ubicación: Madrid, Spain
Contactar:
Contactar ignacio

How to use Debugger

Mensaje por ignacio »

Gary,
The programa should be stopped with a breakpoint or a call to Altd()
function in order to inspect Workareas.
Regards,
--
Ignacio Ortiz de Zúñiga
Xailer support / Soporte de Xailer
http://www.xailer.com
http://www.xailer.info
"Gary S. Rogers" <g.s.rogers@att.net> escribió en el mensaje
news:4aae9b4e$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>I need some basic info on how to see and use the Debugger window. In
>Project Properties, under [x]Harbour Options, I have debug info checked.
> If I run the project, then select Inspect Workareas from the run menu,
> nothing happens. If I put LogDebug() in the Form onCreate event, I see the
> debugger window, but everything is grayed out except Stop Program.
>
> Obviously, I'm missing something simple in order to inspect variable and
> workareas.
> TIA,
> Gary
>
Ignacio Ortiz de Zúñiga
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
Arriba
Avatar de Usuario
ignacio
Site Admin
Mensajes: 9469
Registrado: Lun Abr 06, 2015 8:00 pm
Ubicación: Madrid, Spain
Contactar:
Contactar ignacio

How to use Debugger

Mensaje por ignacio »

Gary,
The programa should be stopped with a breakpoint or a call to Altd()
function in order to inspect Workareas.
Regards,
--
Ignacio Ortiz de Zúñiga
Xailer support / Soporte de Xailer
http://www.xailer.com
http://www.xailer.info
"Gary S. Rogers" <g.s.rogers@att.net> escribió en el mensaje
news:4aae9b4e$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>I need some basic info on how to see and use the Debugger window. In
>Project Properties, under [x]Harbour Options, I have debug info checked.
> If I run the project, then select Inspect Workareas from the run menu,
> nothing happens. If I put LogDebug() in the Form onCreate event, I see the
> debugger window, but everything is grayed out except Stop Program.
>
> Obviously, I'm missing something simple in order to inspect variable and
> workareas.
> TIA,
> Gary
>
Ignacio Ortiz de Zúñiga
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
Arriba
g.s.rogers
Mensajes: 202
Registrado: Dom Feb 17, 2008 3:35 am

How to use Debugger

Mensaje por g.s.rogers »

Thanks, I knew it was something simple.
Related question: Inspecting the work areas does not seem to show whether or
not any relations are set. Is there a way to confirm relationships set
between tables? I see a "Filter" node on the tree view of work areas. Is
that the same as a relationship?
TIA,
Gary
"Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> wrote in message
news:[email=4aaf48c5@svctag-j7w3v3j....]4aaf48c5@svctag-j7w3v3j....[/email]
> Gary,
>
> The programa should be stopped with a breakpoint or a call to Altd()
> function in order to inspect Workareas.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> Xailer support / Soporte de Xailer
> http://www.xailer.com
> http://www.xailer.info
> "Gary S. Rogers" <g.s.rogers@att.net> escribió en el mensaje
> news:4aae9b4e$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>>I need some basic info on how to see and use the Debugger window. In
>>Project Properties, under [x]Harbour Options, I have debug info checked.
>> If I run the project, then select Inspect Workareas from the run menu,
>> nothing happens. If I put LogDebug() in the Form onCreate event, I see
>> the debugger window, but everything is grayed out except Stop Program.
>>
>> Obviously, I'm missing something simple in order to inspect variable and
>> workareas.
>> TIA,
>> Gary
>>
>
>
Arriba
g.s.rogers
Mensajes: 202
Registrado: Dom Feb 17, 2008 3:35 am

How to use Debugger

Mensaje por g.s.rogers »

Thanks, I knew it was something simple.
Related question: Inspecting the work areas does not seem to show whether or
not any relations are set. Is there a way to confirm relationships set
between tables? I see a "Filter" node on the tree view of work areas. Is
that the same as a relationship?
TIA,
Gary
"Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> wrote in message
news:[email=4aaf48c5@svctag-j7w3v3j....]4aaf48c5@svctag-j7w3v3j....[/email]
> Gary,
>
> The programa should be stopped with a breakpoint or a call to Altd()
> function in order to inspect Workareas.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> Xailer support / Soporte de Xailer
> http://www.xailer.com
> http://www.xailer.info
> "Gary S. Rogers" <g.s.rogers@att.net> escribió en el mensaje
> news:4aae9b4e$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>>I need some basic info on how to see and use the Debugger window. In
>>Project Properties, under [x]Harbour Options, I have debug info checked.
>> If I run the project, then select Inspect Workareas from the run menu,
>> nothing happens. If I put LogDebug() in the Form onCreate event, I see
>> the debugger window, but everything is grayed out except Stop Program.
>>
>> Obviously, I'm missing something simple in order to inspect variable and
>> workareas.
>> TIA,
>> Gary
>>
>
>
Arriba
NoAccount
Mensajes: 35
Registrado: Mié Sep 16, 2009 10:09 am

How to use Debugger

Mensaje por NoAccount »

Gary,
I'am afraid that information is not given. Sorry.
Regards,
--
Ignacio Ortiz de Zúñiga
Xailer team
http://www.xailer.com
http://www.xailer.info
"Gary S. Rogers" <g.s.rogers@att.net> escribió en el mensaje
news:[email=4aafc6d1@svctag-j7w3v3j....]4aafc6d1@svctag-j7w3v3j....[/email]
> Thanks, I knew it was something simple.
>
> Related question: Inspecting the work areas does not seem to show whether
> or not any relations are set. Is there a way to confirm relationships set
> between tables? I see a "Filter" node on the tree view of work areas. Is
> that the same as a relationship?
>
> TIA,
> Gary
>
> "Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> wrote in message
> news:[email=4aaf48c5@svctag-j7w3v3j....]4aaf48c5@svctag-j7w3v3j....[/email]
>> Gary,
>>
>> The programa should be stopped with a breakpoint or a call to Altd()
>> function in order to inspect Workareas.
>>
>> Regards,
>>
>> --
>> Ignacio Ortiz de Zúñiga
>> Xailer support / Soporte de Xailer
>> http://www.xailer.com
>> http://www.xailer.info
>> "Gary S. Rogers" <g.s.rogers@att.net> escribió en el mensaje
>> news:4aae9b4e$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>>>I need some basic info on how to see and use the Debugger window. In
>>>Project Properties, under [x]Harbour Options, I have debug info checked.
>>> If I run the project, then select Inspect Workareas from the run menu,
>>> nothing happens. If I put LogDebug() in the Form onCreate event, I see
>>> the debugger window, but everything is grayed out except Stop Program.
>>>
>>> Obviously, I'm missing something simple in order to inspect variable and
>>> workareas.
>>> TIA,
>>> Gary
>>>
>>
>>
>
Arriba
NoAccount
Mensajes: 35
Registrado: Mié Sep 16, 2009 10:09 am

How to use Debugger

Mensaje por NoAccount »

Gary,
I'am afraid that information is not given. Sorry.
Regards,
--
Ignacio Ortiz de Zúñiga
Xailer team
http://www.xailer.com
http://www.xailer.info
"Gary S. Rogers" <g.s.rogers@att.net> escribió en el mensaje
news:[email=4aafc6d1@svctag-j7w3v3j....]4aafc6d1@svctag-j7w3v3j....[/email]
> Thanks, I knew it was something simple.
>
> Related question: Inspecting the work areas does not seem to show whether
> or not any relations are set. Is there a way to confirm relationships set
> between tables? I see a "Filter" node on the tree view of work areas. Is
> that the same as a relationship?
>
> TIA,
> Gary
>
> "Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> wrote in message
> news:[email=4aaf48c5@svctag-j7w3v3j....]4aaf48c5@svctag-j7w3v3j....[/email]
>> Gary,
>>
>> The programa should be stopped with a breakpoint or a call to Altd()
>> function in order to inspect Workareas.
>>
>> Regards,
>>
>> --
>> Ignacio Ortiz de Zúñiga
>> Xailer support / Soporte de Xailer
>> http://www.xailer.com
>> http://www.xailer.info
>> "Gary S. Rogers" <g.s.rogers@att.net> escribió en el mensaje
>> news:4aae9b4e$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>>>I need some basic info on how to see and use the Debugger window. In
>>>Project Properties, under [x]Harbour Options, I have debug info checked.
>>> If I run the project, then select Inspect Workareas from the run menu,
>>> nothing happens. If I put LogDebug() in the Form onCreate event, I see
>>> the debugger window, but everything is grayed out except Stop Program.
>>>
>>> Obviously, I'm missing something simple in order to inspect variable and
>>> workareas.
>>> TIA,
>>> Gary
>>>
>>
>>
>
Arriba
Responder

Volver a “Xailer Pro English”