Hi,
In Xailer 1.9.3 I get some debug window output that I dont think is by me.
See attached image.
Possibly left over from development.
Regards
Chris Gillard
Attached files
In order for this site to work correctly we need to store a small file (called a cookie) on your computer. Most every site in the world does this, however since the 25th of May 2011, by law we have to get your permission first. Please abandon the forum if you disagree.
Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.
Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.
Debug code left in 'FileOpen' dialog ??
-
ChrisGillard
- Mensajes: 384
- Registrado: Mar May 01, 2007 5:49 pm
-
ignacio
- Site Admin
- Mensajes: 9469
- Registrado: Lun Abr 06, 2015 8:00 pm
- Ubicación: Madrid, Spain
- Contactar:
Debug code left in 'FileOpen' dialog ??
Chris,
Is not ours. The Logdebug() function uses the API function
OutputDebugString() which is also used by a lot of software. Xailer is just
showing all the messages sent through that function. That's all.
Regards,
--
Ignacio Ortiz de Zúñiga
[Soporte Xailer]
[Xailer support]
"Chris Gillard" <chris@bluesquare.co.uk> escribió en el mensaje
news:483180c5$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Hi,
>
> In Xailer 1.9.3 I get some debug window output that I dont think is by me.
>
> See attached image.
>
> Possibly left over from development.
>
> Regards
>
> Chris Gillard
>
>
>
>
>
>
Is not ours. The Logdebug() function uses the API function
OutputDebugString() which is also used by a lot of software. Xailer is just
showing all the messages sent through that function. That's all.
Regards,
--
Ignacio Ortiz de Zúñiga
[Soporte Xailer]
[Xailer support]
"Chris Gillard" <chris@bluesquare.co.uk> escribió en el mensaje
news:483180c5$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Hi,
>
> In Xailer 1.9.3 I get some debug window output that I dont think is by me.
>
> See attached image.
>
> Possibly left over from development.
>
> Regards
>
> Chris Gillard
>
>
>
>
>
>
Ignacio Ortiz de Zúñiga
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
Debug code left in 'FileOpen' dialog ??
Chris,
Is not ours. The Logdebug() function uses the API function
OutputDebugString() which is also used by a lot of software. Xailer is just
showing all the messages sent through that function. That's all.
Regards,
--
Ignacio Ortiz de Zúñiga
[Soporte Xailer]
[Xailer support]
"Chris Gillard" <chris@bluesquare.co.uk> escribió en el mensaje
news:483180c5$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Hi,
>
> In Xailer 1.9.3 I get some debug window output that I dont think is by me.
>
> See attached image.
>
> Possibly left over from development.
>
> Regards
>
> Chris Gillard
>
>
>
>
>
>
Is not ours. The Logdebug() function uses the API function
OutputDebugString() which is also used by a lot of software. Xailer is just
showing all the messages sent through that function. That's all.
Regards,
--
Ignacio Ortiz de Zúñiga
[Soporte Xailer]
[Xailer support]
"Chris Gillard" <chris@bluesquare.co.uk> escribió en el mensaje
news:483180c5$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Hi,
>
> In Xailer 1.9.3 I get some debug window output that I dont think is by me.
>
> See attached image.
>
> Possibly left over from development.
>
> Regards
>
> Chris Gillard
>
>
>
>
>
>
-
ChrisGillard
- Mensajes: 384
- Registrado: Mar May 01, 2007 5:49 pm
Debug code left in 'FileOpen' dialog ??
Thanks for the answer ...
If its not my code & not your code ... I presume its Microsoft ??
I have not seen this before.
Regards
Chris
"Ignacio Ortiz de Zúñiga" <NoName@xailer.com> wrote in message
news:[email=4831900b@ozsrv2.ozlan.local...]4831900b@ozsrv2.ozlan.local...[/email]
> Chris,
>
> Is not ours. The Logdebug() function uses the API function
> OutputDebugString() which is also used by a lot of software. Xailer is
> just showing all the messages sent through that function. That's all.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> [Soporte Xailer]
> [Xailer support]
>
>
> "Chris Gillard" <chris@bluesquare.co.uk> escribió en el mensaje
> news:483180c5$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>> Hi,
>>
>> In Xailer 1.9.3 I get some debug window output that I dont think is by
>> me.
>>
>> See attached image.
>>
>> Possibly left over from development.
>>
>> Regards
>>
>> Chris Gillard
>>
>>
>>
>>
>>
>>
>
>
If its not my code & not your code ... I presume its Microsoft ??
I have not seen this before.
Regards
Chris
"Ignacio Ortiz de Zúñiga" <NoName@xailer.com> wrote in message
news:[email=4831900b@ozsrv2.ozlan.local...]4831900b@ozsrv2.ozlan.local...[/email]
> Chris,
>
> Is not ours. The Logdebug() function uses the API function
> OutputDebugString() which is also used by a lot of software. Xailer is
> just showing all the messages sent through that function. That's all.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> [Soporte Xailer]
> [Xailer support]
>
>
> "Chris Gillard" <chris@bluesquare.co.uk> escribió en el mensaje
> news:483180c5$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>> Hi,
>>
>> In Xailer 1.9.3 I get some debug window output that I dont think is by
>> me.
>>
>> See attached image.
>>
>> Possibly left over from development.
>>
>> Regards
>>
>> Chris Gillard
>>
>>
>>
>>
>>
>>
>
>
-
ChrisGillard
- Mensajes: 384
- Registrado: Mar May 01, 2007 5:49 pm
Debug code left in 'FileOpen' dialog ??
Thanks for the answer ...
If its not my code & not your code ... I presume its Microsoft ??
I have not seen this before.
Regards
Chris
"Ignacio Ortiz de Zúñiga" <NoName@xailer.com> wrote in message
news:[email=4831900b@ozsrv2.ozlan.local...]4831900b@ozsrv2.ozlan.local...[/email]
> Chris,
>
> Is not ours. The Logdebug() function uses the API function
> OutputDebugString() which is also used by a lot of software. Xailer is
> just showing all the messages sent through that function. That's all.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> [Soporte Xailer]
> [Xailer support]
>
>
> "Chris Gillard" <chris@bluesquare.co.uk> escribió en el mensaje
> news:483180c5$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>> Hi,
>>
>> In Xailer 1.9.3 I get some debug window output that I dont think is by
>> me.
>>
>> See attached image.
>>
>> Possibly left over from development.
>>
>> Regards
>>
>> Chris Gillard
>>
>>
>>
>>
>>
>>
>
>
If its not my code & not your code ... I presume its Microsoft ??
I have not seen this before.
Regards
Chris
"Ignacio Ortiz de Zúñiga" <NoName@xailer.com> wrote in message
news:[email=4831900b@ozsrv2.ozlan.local...]4831900b@ozsrv2.ozlan.local...[/email]
> Chris,
>
> Is not ours. The Logdebug() function uses the API function
> OutputDebugString() which is also used by a lot of software. Xailer is
> just showing all the messages sent through that function. That's all.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> [Soporte Xailer]
> [Xailer support]
>
>
> "Chris Gillard" <chris@bluesquare.co.uk> escribió en el mensaje
> news:483180c5$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>> Hi,
>>
>> In Xailer 1.9.3 I get some debug window output that I dont think is by
>> me.
>>
>> See attached image.
>>
>> Possibly left over from development.
>>
>> Regards
>>
>> Chris Gillard
>>
>>
>>
>>
>>
>>
>
>
Debug code left in 'FileOpen' dialog ??
Chris,
> If its not my code & not your code ... I presume its Microsoft ??
It seems to be a program that is installed as a 'shell extension' (i.e. a
program like tortoisecvs, winzip, etc.)
> I have not seen this before.
Try to recall if you have installed recently a program as above.
However, it should not be a problem at all.
--
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info
> If its not my code & not your code ... I presume its Microsoft ??
It seems to be a program that is installed as a 'shell extension' (i.e. a
program like tortoisecvs, winzip, etc.)
> I have not seen this before.
Try to recall if you have installed recently a program as above.
However, it should not be a problem at all.
--
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info
Debug code left in 'FileOpen' dialog ??
Chris,
> If its not my code & not your code ... I presume its Microsoft ??
It seems to be a program that is installed as a 'shell extension' (i.e. a
program like tortoisecvs, winzip, etc.)
> I have not seen this before.
Try to recall if you have installed recently a program as above.
However, it should not be a problem at all.
--
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info
> If its not my code & not your code ... I presume its Microsoft ??
It seems to be a program that is installed as a 'shell extension' (i.e. a
program like tortoisecvs, winzip, etc.)
> I have not seen this before.
Try to recall if you have installed recently a program as above.
However, it should not be a problem at all.
--
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info