MsgInfo() error

[jfgimenez]

Ingo,
please, be sure you are not mixing different Xailer version, that is, the
IDE from one version and the libraries from another. I'm almost sure that
this is the problem.
--
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info

[jfgimenez]

Ingo,
please, be sure you are not mixing different Xailer version, that is, the
IDE from one version and the libraries from another. I'm almost sure that
this is the problem.
--
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info

[Ingo JH]

Jose,
I completely deinstalled xailer and eliminated the residual directories
I completlely eliminated BCC 5.5.1
I downloaded Xailer17 and installed it
I downloaded xharboursetup.exe
I downloaded freecommandLinetools.exe from Borland
I installed all new
I sent the email asking for the keycode
I started Xailer without the keycode and recompiled the sample project and
started it
the same error
I restored my old xailer.cfg (with the keycode for Enterprise) and started
Xailer again and recompiled the sample and ran it
the same error
Im waiting now for the XPRO keycode to start it again.
I don't know what I can do more.
Regards
Ingo
"Jose F. Gimenez" <jfgimenez@wanadoo.es> schrieb im Newsbeitrag
news:47190ef9$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Ingo,
>
> please, be sure you are not mixing different Xailer version, that is, the
> IDE from one version and the libraries from another. I'm almost sure that
> this is the problem.
>
> --
> Regards,
>
> Jose F. Gimenez
> http://www.xailer.com
> http://www.xailer.info
>

[Ingo JH]

Jose,
I completely deinstalled xailer and eliminated the residual directories
I completlely eliminated BCC 5.5.1
I downloaded Xailer17 and installed it
I downloaded xharboursetup.exe
I downloaded freecommandLinetools.exe from Borland
I installed all new
I sent the email asking for the keycode
I started Xailer without the keycode and recompiled the sample project and
started it
the same error
I restored my old xailer.cfg (with the keycode for Enterprise) and started
Xailer again and recompiled the sample and ran it
the same error
Im waiting now for the XPRO keycode to start it again.
I don't know what I can do more.
Regards
Ingo
"Jose F. Gimenez" <jfgimenez@wanadoo.es> schrieb im Newsbeitrag
news:47190ef9$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Ingo,
>
> please, be sure you are not mixing different Xailer version, that is, the
> IDE from one version and the libraries from another. I'm almost sure that
> this is the problem.
>
> --
> Regards,
>
> Jose F. Gimenez
> http://www.xailer.com
> http://www.xailer.info
>

[Dionisis Divaris]

Hello Xailer's
Confirming that tstFolder program run as expected :
I can see a MsgAlertBox with "File Not Found" message, before form
creation. No GPF error occured.
Programming Environment:
Vista Ultimate with all updates until today.
Xailer 1.7.6 with the Latest xHarbour Compiler
Regards
Dionisis
Ο "Ingo" <support@mandantwin.com> έγραψε στο μήνυμα
news:[email=4718c3bf@ozsrv2.ozlan.local...]4718c3bf@ozsrv2.ozlan.local...[/email]
> Paal, Stephan,
>
> thank you very much for the reply.
> Stephan I just mailed the exe to your private mailbox.
>
> Regards
> Ingo
>
>>> here is the sample.
>>
>> It also works on a Win 2003 server (datacenter edition) with the Xailer
>> 1.7.5 demo (with xHarbour v0.99.80). The other PC I was testing on is a
>> XP Pro (mediacenter edition) with all the lastest updates.
>>
>> Paal
>>
>
>

[Xailer]

Hello Xailer's
Confirming that tstFolder program run as expected :
I can see a MsgAlertBox with "File Not Found" message, before form
creation. No GPF error occured.
Programming Environment:
Vista Ultimate with all updates until today.
Xailer 1.7.6 with the Latest xHarbour Compiler
Regards
Dionisis
Ο "Ingo" <support@mandantwin.com> έγραψε στο μήνυμα
news:[email=4718c3bf@ozsrv2.ozlan.local...]4718c3bf@ozsrv2.ozlan.local...[/email]
> Paal, Stephan,
>
> thank you very much for the reply.
> Stephan I just mailed the exe to your private mailbox.
>
> Regards
> Ingo
>
>>> here is the sample.
>>
>> It also works on a Win 2003 server (datacenter edition) with the Xailer
>> 1.7.5 demo (with xHarbour v0.99.80). The other PC I was testing on is a
>> XP Pro (mediacenter edition) with all the lastest updates.
>>
>> Paal
>>
>
>

[Dionisis Divaris]

If you want to see it in action try the following link:
www.sgs-soft.grTestTstFolder.avi
(valid for 2 hours from now)
Regards
Dionisis
Ο "Dionisis Divaris" <info@sgs-soft.gr> έγραψε στο μήνυμα
news:4719ce38$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Hello Xailer's
>
> Confirming that tstFolder program run as expected :
> I can see a MsgAlertBox with "File Not Found" message, before form
> creation. No GPF error occured.
>
> Programming Environment:
> Vista Ultimate with all updates until today.
> Xailer 1.7.6 with the Latest xHarbour Compiler
>
> Regards
> Dionisis
>
>
> Ο "Ingo" <support@mandantwin.com> έγραψε στο μήνυμα
> news:[email=4718c3bf@ozsrv2.ozlan.local...]4718c3bf@ozsrv2.ozlan.local...[/email]
>> Paal, Stephan,
>>
>> thank you very much for the reply.
>> Stephan I just mailed the exe to your private mailbox.
>>
>> Regards
>> Ingo
>>
>>>> here is the sample.
>>>
>>> It also works on a Win 2003 server (datacenter edition) with the Xailer
>>> 1.7.5 demo (with xHarbour v0.99.80). The other PC I was testing on is a
>>> XP Pro (mediacenter edition) with all the lastest updates.
>>>
>>> Paal
>>>
>>
>>
>

[Xailer]

If you want to see it in action try the following link:
www.sgs-soft.grTestTstFolder.avi
(valid for 2 hours from now)
Regards
Dionisis
Ο "Dionisis Divaris" <info@sgs-soft.gr> έγραψε στο μήνυμα
news:4719ce38$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Hello Xailer's
>
> Confirming that tstFolder program run as expected :
> I can see a MsgAlertBox with "File Not Found" message, before form
> creation. No GPF error occured.
>
> Programming Environment:
> Vista Ultimate with all updates until today.
> Xailer 1.7.6 with the Latest xHarbour Compiler
>
> Regards
> Dionisis
>
>
> Ο "Ingo" <support@mandantwin.com> έγραψε στο μήνυμα
> news:[email=4718c3bf@ozsrv2.ozlan.local...]4718c3bf@ozsrv2.ozlan.local...[/email]
>> Paal, Stephan,
>>
>> thank you very much for the reply.
>> Stephan I just mailed the exe to your private mailbox.
>>
>> Regards
>> Ingo
>>
>>>> here is the sample.
>>>
>>> It also works on a Win 2003 server (datacenter edition) with the Xailer
>>> 1.7.5 demo (with xHarbour v0.99.80). The other PC I was testing on is a
>>> XP Pro (mediacenter edition) with all the lastest updates.
>>>
>>> Paal
>>>
>>
>>
>

[jfgimenez]

Ingo,
I'm almost sure that there is something incorrect in your Xailer
installation (i.e. mix of different versions). However, please, send me your
exe to check it.
--
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info

[jfgimenez]

Ingo,
I'm almost sure that there is something incorrect in your Xailer
installation (i.e. mix of different versions). However, please, send me your
exe to check it.
--
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info

[Ingo JH]

Jose,
when compiling and running the project at the first time after opening the IDE this message is shown in the debugger window:
#1: HEAP[mwin.exe]:
#2: Heap block at 0027C650 modified at 0027C662 past requested size of a
#3: HEAP[mwin.exe]:
#4: Invalid Address specified to RtlFreeHeap( 00230000, 0027C658 )
Will this problem be solved with 1.8 too?
Regards
Ingo
Ingo,
Forgot my last message. There is no need to test anything else. Finally, I've found it!
The problem is that there are some internal structures that are initialized when the first form is created. In your sample, they are not initialized, so it depends on the previous memory contents to cause and error or silenty ignore those values.
Now, I've forzed them to be initialized are program startup. It involves several modules, so it'll be available in the upcoming version 1.8. In the meantime, please, just create an empty form, just like in the sample I've sent to you a while ago, and call it like:
TForm1():New( Application ):End()
Sorry for any inconvenience, and thank you for your feedback.
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info
--

[Ingo JH]

Jose,
when compiling and running the project at the first time after opening the IDE this message is shown in the debugger window:
#1: HEAP[mwin.exe]:
#2: Heap block at 0027C650 modified at 0027C662 past requested size of a
#3: HEAP[mwin.exe]:
#4: Invalid Address specified to RtlFreeHeap( 00230000, 0027C658 )
Will this problem be solved with 1.8 too?
Regards
Ingo
Ingo,
Forgot my last message. There is no need to test anything else. Finally, I've found it!
The problem is that there are some internal structures that are initialized when the first form is created. In your sample, they are not initialized, so it depends on the previous memory contents to cause and error or silenty ignore those values.
Now, I've forzed them to be initialized are program startup. It involves several modules, so it'll be available in the upcoming version 1.8. In the meantime, please, just create an empty form, just like in the sample I've sent to you a while ago, and call it like:
TForm1():New( Application ):End()
Sorry for any inconvenience, and thank you for your feedback.
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info
--