In order for this site to work correctly we need to store a small file (called a cookie) on your computer. Most every site in the world does this, however since the 25th of May 2011, by law we have to get your permission first. Please abandon the forum if you disagree.
Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.
Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.
How to zap a table in the DBF Table editor?
How to zap a table in the DBF Table editor?
To zap a dbf file in the DBF table editor you have to open it first. Is this
correct? But then you got the attached errormessage. How to do it?
Regards
Ingo
--
Attached files
-
ignacio
- Site Admin
- Mensajes: 9469
- Registrado: Lun Abr 06, 2015 8:00 pm
- Ubicación: Madrid, Spain
- Contactar:
How to zap a table in the DBF Table editor?
Ingo,
You surely have the same file open by the IDE itself.
Regards,
--
Ignacio Ortiz de Zúñiga
http://www.xailer.com
"Ingo " <[email=XPRO-0031BA74-01@10.0.0.10]XPRO-0031BA74-01@10.0.0.10[/email]> escribió en el mensaje
news:4678d1c2$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>
> To zap a dbf file in the DBF table editor you have to open it first. Is
> this
> correct? But then you got the attached errormessage. How to do it?
>
> Regards
>
> Ingo
You surely have the same file open by the IDE itself.
Regards,
--
Ignacio Ortiz de Zúñiga
http://www.xailer.com
"Ingo " <[email=XPRO-0031BA74-01@10.0.0.10]XPRO-0031BA74-01@10.0.0.10[/email]> escribió en el mensaje
news:4678d1c2$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>
> To zap a dbf file in the DBF table editor you have to open it first. Is
> this
> correct? But then you got the attached errormessage. How to do it?
>
> Regards
>
> Ingo
Ignacio Ortiz de Zúñiga
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
How to zap a table in the DBF Table editor?
Ingo,
You surely have the same file open by the IDE itself.
Regards,
--
Ignacio Ortiz de Zúñiga
http://www.xailer.com
"Ingo " <[email=XPRO-0031BA74-01@10.0.0.10]XPRO-0031BA74-01@10.0.0.10[/email]> escribió en el mensaje
news:4678d1c2$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>
> To zap a dbf file in the DBF table editor you have to open it first. Is
> this
> correct? But then you got the attached errormessage. How to do it?
>
> Regards
>
> Ingo
You surely have the same file open by the IDE itself.
Regards,
--
Ignacio Ortiz de Zúñiga
http://www.xailer.com
"Ingo " <[email=XPRO-0031BA74-01@10.0.0.10]XPRO-0031BA74-01@10.0.0.10[/email]> escribió en el mensaje
news:4678d1c2$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>
> To zap a dbf file in the DBF table editor you have to open it first. Is
> this
> correct? But then you got the attached errormessage. How to do it?
>
> Regards
>
> Ingo
How to zap a table in the DBF Table editor?
Ignacio,
you're right: the tableform was opened in the IDE. I understand now if the
form is on screen then the linked table is still opened by the IDE even though
the table property :lOpen = .F.
Sorry for that stupid question.
Regards
Ingo
"Ignacio Ortiz de Zúñiga" <NoName@xailer.com> wrote:
>Ingo,
>
>You surely have the same file open by the IDE itself.
>
>Regards,
>
>--
>Ignacio Ortiz de Zúñiga
>http://www.xailer.com
>
>
>"Ingo " <[email=XPRO-0031BA74-01@10.0.0.10]XPRO-0031BA74-01@10.0.0.10[/email]> escribió en el mensaje
>news:4678d1c2$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>
>> To zap a dbf file in the DBF table editor you have to open it first. Is
>> this
>> correct? But then you got the attached errormessage. How to do it?
>>
>> Regards
>>
>> Ingo
>
>
you're right: the tableform was opened in the IDE. I understand now if the
form is on screen then the linked table is still opened by the IDE even though
the table property :lOpen = .F.
Sorry for that stupid question.
Regards
Ingo
"Ignacio Ortiz de Zúñiga" <NoName@xailer.com> wrote:
>Ingo,
>
>You surely have the same file open by the IDE itself.
>
>Regards,
>
>--
>Ignacio Ortiz de Zúñiga
>http://www.xailer.com
>
>
>"Ingo " <[email=XPRO-0031BA74-01@10.0.0.10]XPRO-0031BA74-01@10.0.0.10[/email]> escribió en el mensaje
>news:4678d1c2$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>
>> To zap a dbf file in the DBF table editor you have to open it first. Is
>> this
>> correct? But then you got the attached errormessage. How to do it?
>>
>> Regards
>>
>> Ingo
>
>
How to zap a table in the DBF Table editor?
Ignacio,
you're right: the tableform was opened in the IDE. I understand now if the
form is on screen then the linked table is still opened by the IDE even though
the table property :lOpen = .F.
Sorry for that stupid question.
Regards
Ingo
"Ignacio Ortiz de Zúñiga" <NoName@xailer.com> wrote:
>Ingo,
>
>You surely have the same file open by the IDE itself.
>
>Regards,
>
>--
>Ignacio Ortiz de Zúñiga
>http://www.xailer.com
>
>
>"Ingo " <[email=XPRO-0031BA74-01@10.0.0.10]XPRO-0031BA74-01@10.0.0.10[/email]> escribió en el mensaje
>news:4678d1c2$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>
>> To zap a dbf file in the DBF table editor you have to open it first. Is
>> this
>> correct? But then you got the attached errormessage. How to do it?
>>
>> Regards
>>
>> Ingo
>
>
you're right: the tableform was opened in the IDE. I understand now if the
form is on screen then the linked table is still opened by the IDE even though
the table property :lOpen = .F.
Sorry for that stupid question.
Regards
Ingo
"Ignacio Ortiz de Zúñiga" <NoName@xailer.com> wrote:
>Ingo,
>
>You surely have the same file open by the IDE itself.
>
>Regards,
>
>--
>Ignacio Ortiz de Zúñiga
>http://www.xailer.com
>
>
>"Ingo " <[email=XPRO-0031BA74-01@10.0.0.10]XPRO-0031BA74-01@10.0.0.10[/email]> escribió en el mensaje
>news:4678d1c2$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>
>> To zap a dbf file in the DBF table editor you have to open it first. Is
>> this
>> correct? But then you got the attached errormessage. How to do it?
>>
>> Regards
>>
>> Ingo
>
>