In order for this site to work correctly we need to store a small file (called a cookie) on your computer. Most every site in the world does this, however since the 25th of May 2011, by law we have to get your permission first. Please abandon the forum if you disagree.
Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.
Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.
Registration problem
-
Ingo Junge-Herrmann
- Mensajes: 339
- Registrado: Lun Jul 02, 2007 7:17 pm
Registration problem
Ignacio,
I build a new project. Starting the exe outside the IDE i get the error messagebox
(see the attached file).
I called the registration routine and inserted the registration code again
and got the message that the code is valid. But I cannot start the exe outside
the IDE like before.
I deleted the *.xpj and the .xdt files an started the new project again,
called the registration routine again, recompiled all files of this project,
but without success.
What's to do?
Regards
Ingo
--
Attached files
-
ignacio
- Site Admin
- Mensajes: 9440
- Registrado: Lun Abr 06, 2015 8:00 pm
- Ubicación: Madrid, Spain
- Contactar:
Registration problem
Ingo,
It seems you are registering the IDE as a demo version. Really strange.
Please confirm that you are using your personal serial number (never publish
it here) and not the DEMO. You can see that from the menu option Help-About
....
Check also the VersionInfo of the executable with any resource editor or
simply with the file properties dialog. Confirm that your company is on that
resource.
Regards,
"Ingo Junge-Herrmann" <[email=XPRO-0031BA74-01@10.0.0.11]XPRO-0031BA74-01@10.0.0.11[/email]> escribió en el mensaje
news:43852e92$[email=1@ozsrvnegro.ozlan.local...]1@ozsrvnegro.ozlan.local...[/email]
>
> Ignacio,
>
> I build a new project. Starting the exe outside the IDE i get the error
> messagebox
> (see the attached file).
> I called the registration routine and inserted the registration code again
> and got the message that the code is valid. But I cannot start the exe
> outside
> the IDE like before.
> I deleted the *.xpj and the .xdt files an started the new project again,
> called the registration routine again, recompiled all files of this
> project,
> but without success.
>
> What's to do?
>
> Regards
>
> Ingo
It seems you are registering the IDE as a demo version. Really strange.
Please confirm that you are using your personal serial number (never publish
it here) and not the DEMO. You can see that from the menu option Help-About
....
Check also the VersionInfo of the executable with any resource editor or
simply with the file properties dialog. Confirm that your company is on that
resource.
Regards,
"Ingo Junge-Herrmann" <[email=XPRO-0031BA74-01@10.0.0.11]XPRO-0031BA74-01@10.0.0.11[/email]> escribió en el mensaje
news:43852e92$[email=1@ozsrvnegro.ozlan.local...]1@ozsrvnegro.ozlan.local...[/email]
>
> Ignacio,
>
> I build a new project. Starting the exe outside the IDE i get the error
> messagebox
> (see the attached file).
> I called the registration routine and inserted the registration code again
> and got the message that the code is valid. But I cannot start the exe
> outside
> the IDE like before.
> I deleted the *.xpj and the .xdt files an started the new project again,
> called the registration routine again, recompiled all files of this
> project,
> but without success.
>
> What's to do?
>
> Regards
>
> Ingo
Ignacio Ortiz de Zúñiga
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
[OZ Software]
https://www.ozs.es
--
[Equipo de Xailer / Xailer team]
https://www.xailer.com
-
InvalidAccount
- Mensajes: 53
- Registrado: Vie Mar 04, 2005 9:58 am
Registration problem
Ingo,
It seems you are registering the IDE as a demo version. Really strange.
Please confirm that you are using your personal serial number (never publish
it here) and not the DEMO. You can see that from the menu option Help-About
....
Check also the VersionInfo of the executable with any resource editor or
simply with the file properties dialog. Confirm that your company is on that
resource.
Regards,
"Ingo Junge-Herrmann" <[email=XPRO-0031BA74-01@10.0.0.11]XPRO-0031BA74-01@10.0.0.11[/email]> escribió en el mensaje
news:43852e92$[email=1@ozsrvnegro.ozlan.local...]1@ozsrvnegro.ozlan.local...[/email]
>
> Ignacio,
>
> I build a new project. Starting the exe outside the IDE i get the error
> messagebox
> (see the attached file).
> I called the registration routine and inserted the registration code again
> and got the message that the code is valid. But I cannot start the exe
> outside
> the IDE like before.
> I deleted the *.xpj and the .xdt files an started the new project again,
> called the registration routine again, recompiled all files of this
> project,
> but without success.
>
> What's to do?
>
> Regards
>
> Ingo
It seems you are registering the IDE as a demo version. Really strange.
Please confirm that you are using your personal serial number (never publish
it here) and not the DEMO. You can see that from the menu option Help-About
....
Check also the VersionInfo of the executable with any resource editor or
simply with the file properties dialog. Confirm that your company is on that
resource.
Regards,
"Ingo Junge-Herrmann" <[email=XPRO-0031BA74-01@10.0.0.11]XPRO-0031BA74-01@10.0.0.11[/email]> escribió en el mensaje
news:43852e92$[email=1@ozsrvnegro.ozlan.local...]1@ozsrvnegro.ozlan.local...[/email]
>
> Ignacio,
>
> I build a new project. Starting the exe outside the IDE i get the error
> messagebox
> (see the attached file).
> I called the registration routine and inserted the registration code again
> and got the message that the code is valid. But I cannot start the exe
> outside
> the IDE like before.
> I deleted the *.xpj and the .xdt files an started the new project again,
> called the registration routine again, recompiled all files of this
> project,
> but without success.
>
> What's to do?
>
> Regards
>
> Ingo
-
Ingo Junge-Herrmann
- Mensajes: 339
- Registrado: Lun Jul 02, 2007 7:17 pm
Registration problem
"Ignacio Ortiz de Zúñiga" <InvalidAccount@ozs.com> wrote:
>Ingo,
>
>It seems you are registering the IDE as a demo version. Really strange.
>Please confirm that you are using your personal serial number (never publish
>it here) and not the DEMO. You can see that from the menu option Help-About
>...
>
>Check also the VersionInfo of the executable with any resource editor or
>simply with the file properties dialog. Confirm that your company is on
that
>resource.
>
Ignacio,
you're right. I imported the RC-file and there was the other versioninfo.
After deleting it from the resource it works now.
Thank you very much
Ingo
>Ingo,
>
>It seems you are registering the IDE as a demo version. Really strange.
>Please confirm that you are using your personal serial number (never publish
>it here) and not the DEMO. You can see that from the menu option Help-About
>...
>
>Check also the VersionInfo of the executable with any resource editor or
>simply with the file properties dialog. Confirm that your company is on
that
>resource.
>
Ignacio,
you're right. I imported the RC-file and there was the other versioninfo.
After deleting it from the resource it works now.
Thank you very much
Ingo
-
Ingo Junge-Herrmann
- Mensajes: 339
- Registrado: Lun Jul 02, 2007 7:17 pm
Registration problem
"Ignacio Ortiz de Zúñiga" <InvalidAccount@ozs.com> wrote:
>Ingo,
>
>It seems you are registering the IDE as a demo version. Really strange.
>Please confirm that you are using your personal serial number (never publish
>it here) and not the DEMO. You can see that from the menu option Help-About
>...
>
>Check also the VersionInfo of the executable with any resource editor or
>simply with the file properties dialog. Confirm that your company is on
that
>resource.
>
Ignacio,
you're right. I imported the RC-file and there was the other versioninfo.
After deleting it from the resource it works now.
Thank you very much
Ingo
>Ingo,
>
>It seems you are registering the IDE as a demo version. Really strange.
>Please confirm that you are using your personal serial number (never publish
>it here) and not the DEMO. You can see that from the menu option Help-About
>...
>
>Check also the VersionInfo of the executable with any resource editor or
>simply with the file properties dialog. Confirm that your company is on
that
>resource.
>
Ignacio,
you're right. I imported the RC-file and there was the other versioninfo.
After deleting it from the resource it works now.
Thank you very much
Ingo