Xailer & OZ Software

If the autoupdate is deactivated and I click on the button "Jetzt nach Upgrades
suchen" ('now looking for upgrades')
I get the error message after the connection to Xailer.com
Xailer Update: Error HTTP:3
Ingo

Ingo,
It can be a communication error on your side. Does it happens always?
Regards,
--
Ignacio Ortiz de Zúñiga
http://www.xailer.com
"Ingo" <[email=XPRO-0031BA74-01@10.0.0.10]XPRO-0031BA74-01@10.0.0.10[/email]> escribió en el mensaje
news:46849bad$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>
> If the autoupdate is deactivated and I click on the button "Jetzt nach
> Upgrades
> suchen" ('now looking for upgrades')
> I get the error message after the connection to Xailer.com
>
> Xailer Update: Error HTTP:3
>
>
> Ingo

Ingo,
It can be a communication error on your side. Does it happens always?
Regards,
--
Ignacio Ortiz de Zúñiga
http://www.xailer.com
"Ingo" <[email=XPRO-0031BA74-01@10.0.0.10]XPRO-0031BA74-01@10.0.0.10[/email]> escribió en el mensaje
news:46849bad$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>
> If the autoupdate is deactivated and I click on the button "Jetzt nach
> Upgrades
> suchen" ('now looking for upgrades')
> I get the error message after the connection to Xailer.com
>
> Xailer Update: Error HTTP:3
>
>
> Ingo

Ignacio,
no, only if autoupdate is deactivated.
If I change it to automatic download and manually or automatic installing
and rerun Xailer it works without any error. But if it is deactivated and
I click on the button to look for updates then the error occurs.
Regards
Ingo
"Ignacio Ortiz de Zúñiga" <NoName@xailer.com> wrote:
>Ingo,
>
>It can be a communication error on your side. Does it happens always?
>
>Regards,
>
>--
>Ignacio Ortiz de Zúñiga
>http://www.xailer.com
>
>
>"Ingo" <[email=XPRO-0031BA74-01@10.0.0.10]XPRO-0031BA74-01@10.0.0.10[/email]> escribió en el mensaje
>news:46849bad$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>
>> If the autoupdate is deactivated and I click on the button "Jetzt nach
>> Upgrades
>> suchen" ('now looking for upgrades')
>> I get the error message after the connection to Xailer.com
>>
>> Xailer Update: Error HTTP:3
>>
>>
>> Ingo
>
>

Ignacio,
no, only if autoupdate is deactivated.
If I change it to automatic download and manually or automatic installing
and rerun Xailer it works without any error. But if it is deactivated and
I click on the button to look for updates then the error occurs.
Regards
Ingo
"Ignacio Ortiz de Zúñiga" <NoName@xailer.com> wrote:
>Ingo,
>
>It can be a communication error on your side. Does it happens always?
>
>Regards,
>
>--
>Ignacio Ortiz de Zúñiga
>http://www.xailer.com
>
>
>"Ingo" <[email=XPRO-0031BA74-01@10.0.0.10]XPRO-0031BA74-01@10.0.0.10[/email]> escribió en el mensaje
>news:46849bad$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>
>> If the autoupdate is deactivated and I click on the button "Jetzt nach
>> Upgrades
>> suchen" ('now looking for upgrades')
>> I get the error message after the connection to Xailer.com
>>
>> Xailer Update: Error HTTP:3
>>
>>
>> Ingo
>
>

Ingo,
I am afraid I can not reproduce that problem either. Sorry.
Regards,
--
Ignacio Ortiz de Zúñiga
http://www.xailer.com
"Ingo" <[email=XPRO-0031BA74-01@10.0.0.10]XPRO-0031BA74-01@10.0.0.10[/email]> escribió en el mensaje
news:4684d64f$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>
> Ignacio,
>
> no, only if autoupdate is deactivated.
>
> If I change it to automatic download and manually or automatic installing
> and rerun Xailer it works without any error. But if it is deactivated and
> I click on the button to look for updates then the error occurs.
>
> Regards
>
> Ingo
>
>
> "Ignacio Ortiz de Zúñiga" <NoName@xailer.com> wrote:
>>Ingo,
>>
>>It can be a communication error on your side. Does it happens always?
>>
>>Regards,
>>
>>--
>>Ignacio Ortiz de Zúñiga
>>http://www.xailer.com
>>
>>
>>"Ingo" <[email=XPRO-0031BA74-01@10.0.0.10]XPRO-0031BA74-01@10.0.0.10[/email]> escribió en el mensaje
>>news:46849bad$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>>
>>> If the autoupdate is deactivated and I click on the button "Jetzt nach
>
>>> Upgrades
>>> suchen" ('now looking for upgrades')
>>> I get the error message after the connection to Xailer.com
>>>
>>> Xailer Update: Error HTTP:3
>>>
>>>
>>> Ingo
>>
>>
>

Ingo,
I am afraid I can not reproduce that problem either. Sorry.
Regards,
--
Ignacio Ortiz de Zúñiga
http://www.xailer.com
"Ingo" <[email=XPRO-0031BA74-01@10.0.0.10]XPRO-0031BA74-01@10.0.0.10[/email]> escribió en el mensaje
news:4684d64f$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>
> Ignacio,
>
> no, only if autoupdate is deactivated.
>
> If I change it to automatic download and manually or automatic installing
> and rerun Xailer it works without any error. But if it is deactivated and
> I click on the button to look for updates then the error occurs.
>
> Regards
>
> Ingo
>
>
> "Ignacio Ortiz de Zúñiga" <NoName@xailer.com> wrote:
>>Ingo,
>>
>>It can be a communication error on your side. Does it happens always?
>>
>>Regards,
>>
>>--
>>Ignacio Ortiz de Zúñiga
>>http://www.xailer.com
>>
>>
>>"Ingo" <[email=XPRO-0031BA74-01@10.0.0.10]XPRO-0031BA74-01@10.0.0.10[/email]> escribió en el mensaje
>>news:46849bad$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>>
>>> If the autoupdate is deactivated and I click on the button "Jetzt nach
>
>>> Upgrades
>>> suchen" ('now looking for upgrades')
>>> I get the error message after the connection to Xailer.com
>>>
>>> Xailer Update: Error HTTP:3
>>>
>>>
>>> Ingo
>>
>>
>

Ignacio!
> I am afraid I can not reproduce that problem either. Sorry.
I also have this error with the same conditions (autoupdate is deactivated).
I occurs only if I compile & run any project before.
You can easily reproduce it: start Xailer, open any working project, change
any source code, compile and run, close running program,
then click menuitem 'ToolsOptions', click button 'Search for updates now'.
I always get 'HTTP error 3' in this sequence.
Regards, Oleg

Ignacio!
> I am afraid I can not reproduce that problem either. Sorry.
I also have this error with the same conditions (autoupdate is deactivated).
I occurs only if I compile & run any project before.
You can easily reproduce it: start Xailer, open any working project, change
any source code, compile and run, close running program,
then click menuitem 'ToolsOptions', click button 'Search for updates now'.
I always get 'HTTP error 3' in this sequence.
Regards, Oleg

Oleg,
I am afraid it works here correctly. Can someone test it. TIA.
Regards,
--
Ignacio Ortiz de Zúñiga
http://www.xailer.com
"Oleg" <info@cluster.samara.ru> escribió en el mensaje
news:[email=468b8e1d@ozsrv2.ozlan.local...]468b8e1d@ozsrv2.ozlan.local...[/email]
> Ignacio!
>
>> I am afraid I can not reproduce that problem either. Sorry.
>
> I also have this error with the same conditions (autoupdate is
> deactivated). I occurs only if I compile & run any project before.
> You can easily reproduce it: start Xailer, open any working project,
> change any source code, compile and run, close running program,
> then click menuitem 'ToolsOptions', click button 'Search for updates
> now'. I always get 'HTTP error 3' in this sequence.
>
> Regards, Oleg
>

Oleg,
I am afraid it works here correctly. Can someone test it. TIA.
Regards,
--
Ignacio Ortiz de Zúñiga
http://www.xailer.com
"Oleg" <info@cluster.samara.ru> escribió en el mensaje
news:[email=468b8e1d@ozsrv2.ozlan.local...]468b8e1d@ozsrv2.ozlan.local...[/email]
> Ignacio!
>
>> I am afraid I can not reproduce that problem either. Sorry.
>
> I also have this error with the same conditions (autoupdate is
> deactivated). I occurs only if I compile & run any project before.
> You can easily reproduce it: start Xailer, open any working project,
> change any source code, compile and run, close running program,
> then click menuitem 'ToolsOptions', click button 'Search for updates
> now'. I always get 'HTTP error 3' in this sequence.
>
> Regards, Oleg
>

Ignacio and Igno
I try to reproduct the Igno problem, but i'm afraid, the auto update method
work's perfect. Unistalling and installing again the xailer 1.5, (deleteing
the upgrades directory) again work perfect with and without deactivate
updates no HTTP problem or error occured. Every time the system conected to
upgrade site with success.
Regards
Dionsis
Ï "Ignacio Ortiz de Zúñiga" <NoName@xailer.com> Ýãñáøå óôï ìÞíõìá
news:468bbdbd$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Oleg,
>
> I am afraid it works here correctly. Can someone test it. TIA.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> http://www.xailer.com
>
>
> "Oleg" <info@cluster.samara.ru> escribió en el mensaje
> news:[email=468b8e1d@ozsrv2.ozlan.local...]468b8e1d@ozsrv2.ozlan.local...[/email]
>> Ignacio!
>>
>>> I am afraid I can not reproduce that problem either. Sorry.
>>
>> I also have this error with the same conditions (autoupdate is
>> deactivated). I occurs only if I compile & run any project before.
>> You can easily reproduce it: start Xailer, open any working project,
>> change any source code, compile and run, close running program,
>> then click menuitem 'ToolsOptions', click button 'Search for updates
>> now'. I always get 'HTTP error 3' in this sequence.
>>
>> Regards, Oleg
>>
>
>

Ignacio and Igno
I try to reproduct the Igno problem, but i'm afraid, the auto update method
work's perfect. Unistalling and installing again the xailer 1.5, (deleteing
the upgrades directory) again work perfect with and without deactivate
updates no HTTP problem or error occured. Every time the system conected to
upgrade site with success.
Regards
Dionsis
Ï "Ignacio Ortiz de Zúñiga" <NoName@xailer.com> Ýãñáøå óôï ìÞíõìá
news:468bbdbd$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Oleg,
>
> I am afraid it works here correctly. Can someone test it. TIA.
>
> Regards,
>
> --
> Ignacio Ortiz de Zúñiga
> http://www.xailer.com
>
>
> "Oleg" <info@cluster.samara.ru> escribió en el mensaje
> news:[email=468b8e1d@ozsrv2.ozlan.local...]468b8e1d@ozsrv2.ozlan.local...[/email]
>> Ignacio!
>>
>>> I am afraid I can not reproduce that problem either. Sorry.
>>
>> I also have this error with the same conditions (autoupdate is
>> deactivated). I occurs only if I compile & run any project before.
>> You can easily reproduce it: start Xailer, open any working project,
>> change any source code, compile and run, close running program,
>> then click menuitem 'ToolsOptions', click button 'Search for updates
>> now'. I always get 'HTTP error 3' in this sequence.
>>
>> Regards, Oleg
>>
>
>

Dionisis!
> I try to reproduct the Igno problem, but i'm afraid, the auto update
> method work's perfect. Unistalling and installing again the xailer 1.5,
> (deleteing the upgrades directory) again work perfect with and without
> deactivate updates no HTTP problem or error occured. Every time the system
> conected to upgrade site with success.
At my side this error always occurs in the described case.
Maybe it is side effect of some installed programs combination.
Maybe it is because I have dial-up connection on the server (WinXP Prof)
shared in the LAN.
I work with Internet at the workstation (WinXP Prof) through this server.
Anyway I can live with it I just want to help to 'catch the bug'.
Regards, Oleg

Dionisis!
> I try to reproduct the Igno problem, but i'm afraid, the auto update
> method work's perfect. Unistalling and installing again the xailer 1.5,
> (deleteing the upgrades directory) again work perfect with and without
> deactivate updates no HTTP problem or error occured. Every time the system
> conected to upgrade site with success.
At my side this error always occurs in the described case.
Maybe it is side effect of some installed programs combination.
Maybe it is because I have dial-up connection on the server (WinXP Prof)
shared in the LAN.
I work with Internet at the workstation (WinXP Prof) through this server.
Anyway I can live with it I just want to help to 'catch the bug'.
Regards, Oleg

Oleg,
Does it happens ONLY when you have made a compile & run process?
Do you receive the same error HTTP:3?
Can you check if only happnes when using the debugger?
Thanks
--
Ignacio Ortiz de Zúñiga
http://www.xailer.com
"Oleg" <info@cluster.samara.ru> escribió en el mensaje
news:[email=468c7f10@ozsrv2.ozlan.local...]468c7f10@ozsrv2.ozlan.local...[/email]
> Dionisis!
>
>> I try to reproduct the Igno problem, but i'm afraid, the auto update
>> method work's perfect. Unistalling and installing again the xailer 1.5,
>> (deleteing the upgrades directory) again work perfect with and without
>> deactivate updates no HTTP problem or error occured. Every time the
>> system conected to upgrade site with success.
>
> At my side this error always occurs in the described case.
> Maybe it is side effect of some installed programs combination.
> Maybe it is because I have dial-up connection on the server (WinXP Prof)
> shared in the LAN.
> I work with Internet at the workstation (WinXP Prof) through this server.
>
> Anyway I can live with it I just want to help to 'catch the bug'.
>
> Regards, Oleg
>

Oleg,
Does it happens ONLY when you have made a compile & run process?
Do you receive the same error HTTP:3?
Can you check if only happnes when using the debugger?
Thanks
--
Ignacio Ortiz de Zúñiga
http://www.xailer.com
"Oleg" <info@cluster.samara.ru> escribió en el mensaje
news:[email=468c7f10@ozsrv2.ozlan.local...]468c7f10@ozsrv2.ozlan.local...[/email]
> Dionisis!
>
>> I try to reproduct the Igno problem, but i'm afraid, the auto update
>> method work's perfect. Unistalling and installing again the xailer 1.5,
>> (deleteing the upgrades directory) again work perfect with and without
>> deactivate updates no HTTP problem or error occured. Every time the
>> system conected to upgrade site with success.
>
> At my side this error always occurs in the described case.
> Maybe it is side effect of some installed programs combination.
> Maybe it is because I have dial-up connection on the server (WinXP Prof)
> shared in the LAN.
> I work with Internet at the workstation (WinXP Prof) through this server.
>
> Anyway I can live with it I just want to help to 'catch the bug'.
>
> Regards, Oleg
>

Ignacio!
> Does it happens ONLY when you have made a compile & run process?
Yes, always after 'compile' or 'compile & run' if any source code was
changed.
> Do you receive the same error HTTP:3?
Yes, lines sequence 'Connected to xaler.com' then 'Error HTTP: 3'
> Can you check if only happnes when using the debugger?
Any case, with or without debug info.
BTW I am getting this error with sample project, attached to 'Window
flickering' thread.
Regards, Oleg

Ignacio!
> Does it happens ONLY when you have made a compile & run process?
Yes, always after 'compile' or 'compile & run' if any source code was
changed.
> Do you receive the same error HTTP:3?
Yes, lines sequence 'Connected to xaler.com' then 'Error HTTP: 3'
> Can you check if only happnes when using the debugger?
Any case, with or without debug info.
BTW I am getting this error with sample project, attached to 'Window
flickering' thread.
Regards, Oleg

Oleg,
Could you try to disable your personal Firewall an the Antivirus and try
again. TIA
Regards,
--
Ignacio Ortiz de Zúñiga
http://www.xailer.com
"Oleg" <info@cluster.samara.ru> escribió en el mensaje
news:[email=468ccd4e@ozsrv2.ozlan.local...]468ccd4e@ozsrv2.ozlan.local...[/email]
> Ignacio!
>
>> Does it happens ONLY when you have made a compile & run process?
> Yes, always after 'compile' or 'compile & run' if any source code was
> changed.
>
>> Do you receive the same error HTTP:3?
> Yes, lines sequence 'Connected to xaler.com' then 'Error HTTP: 3'
>
>> Can you check if only happnes when using the debugger?
> Any case, with or without debug info.
>
> BTW I am getting this error with sample project, attached to 'Window
> flickering' thread.
>
> Regards, Oleg
>
>

Oleg,
Could you try to disable your personal Firewall an the Antivirus and try
again. TIA
Regards,
--
Ignacio Ortiz de Zúñiga
http://www.xailer.com
"Oleg" <info@cluster.samara.ru> escribió en el mensaje
news:[email=468ccd4e@ozsrv2.ozlan.local...]468ccd4e@ozsrv2.ozlan.local...[/email]
> Ignacio!
>
>> Does it happens ONLY when you have made a compile & run process?
> Yes, always after 'compile' or 'compile & run' if any source code was
> changed.
>
>> Do you receive the same error HTTP:3?
> Yes, lines sequence 'Connected to xaler.com' then 'Error HTTP: 3'
>
>> Can you check if only happnes when using the debugger?
> Any case, with or without debug info.
>
> BTW I am getting this error with sample project, attached to 'Window
> flickering' thread.
>
> Regards, Oleg
>
>

Ignacio!
> Could you try to disable your personal Firewall an the Antivirus and try
> again. TIA
Sorry, but no effect after disabling.
Maybe the problem is on my side indeed. I have tried to install Xailer DEMO
onto another computer in my LAN (XP Home SP2 with internal Windows
firewall). I have tested the same project with the same sequence. Autoupdate
works perfectly on it.
I will try to do some more tests on my XP Prof and if I succeed, I will
inform you.
Regards, Oleg

Ignacio!
> Could you try to disable your personal Firewall an the Antivirus and try
> again. TIA
Sorry, but no effect after disabling.
Maybe the problem is on my side indeed. I have tried to install Xailer DEMO
onto another computer in my LAN (XP Home SP2 with internal Windows
firewall). I have tested the same project with the same sequence. Autoupdate
works perfectly on it.
I will try to do some more tests on my XP Prof and if I succeed, I will
inform you.
Regards, Oleg