Xailer & OZ Software

Más información en el siguiente enlace: http://xailer.info/esp/?p=111
------------------------------------------------------------ ------
Further information on this link: http://xailer.info/eng/?p=37
http://www.xailer.com

Happy New Year Ignacio,Jose and all Xailer's
I have problem whwn launcing a configurable tool.
For example i have xHarbour Documantation as a configurable tool. When i try
to open through the tools menu i get an error (see ataching error log).
When i choose Ignore the help file comes up. As a workaround for the moment
this helps, but try to fix it because it is very annoying.
Again hot wises for the new year!
Best Regards
Dionisis
Ï "Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> Ýãñáøå óôï ìÞíõìá
news:[email=49624d8b@svctag-j7w3v3j....]49624d8b@svctag-j7w3v3j....[/email]
> Más información en el siguiente enlace: http://xailer.info/esp/?p=111
> ------------------------------------------------------------ ------
> Further information on this link: http://xailer.info/eng/?p=37
>
> http://www.xailer.com
>
>


Attached files error.log.txt (1 KB)Â

Nice work developers!!
I have just tried the new version with some of my Xailer projects, and they
all work fine. Building is indeed much faster now.
Also encypted a 520 Mb SQLite database with half a minute!!! Wow. Running
queries on the encrypted database doesn't show any performance loss at all!!
Is there also an option to decrypt te database??
Regards,
Stephan
"Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> wrote in message
news:[email=49624d8b@svctag-j7w3v3j....]49624d8b@svctag-j7w3v3j....[/email]
> Más información en el siguiente enlace: http://xailer.info/esp/?p=111
> ------------------------------------------------------------ ------
> Further information on this link: http://xailer.info/eng/?p=37
>
> http://www.xailer.com
>
>

Already found out how to decrypt an encrypted database. Just leave out the
passwords in the sqlite explorer.
"Stephan Hennekens" <stephan.hennekens@wur.nl> wrote in message
news:49627953$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
> Nice work developers!!
>
> I have just tried the new version with some of my Xailer projects, and
> they all work fine. Building is indeed much faster now.
> Also encypted a 520 Mb SQLite database with half a minute!!! Wow. Running
> queries on the encrypted database doesn't show any performance loss at
> all!!
>
> Is there also an option to decrypt te database??
>
> Regards,
> Stephan
>
>
> "Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> wrote in message
> news:[email=49624d8b@svctag-j7w3v3j....]49624d8b@svctag-j7w3v3j....[/email]
>> Más información en el siguiente enlace: http://xailer.info/esp/?p=111
>> ------------------------------------------------------------ ------
>> Further information on this link: http://xailer.info/eng/?p=37
>>
>> http://www.xailer.com
>>
>>
>
>

Dionisis,
I think I found and fix the problem, it should only arise when there is no
active project. Please confirm. TIA.
Regards,
--
Ignacio Ortiz de Zúñiga
Xailer support / Soporte de Xailer
http://www.xailer.com
http://www.xailer.info
"Dionisis Divaris" <info@sgs-soft.gr> escribió en el mensaje
news:49626a8f$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
> Happy New Year Ignacio,Jose and all Xailer's
>
> I have problem whwn launcing a configurable tool.
> For example i have xHarbour Documantation as a configurable tool. When i
> try to open through the tools menu i get an error (see ataching error
> log). When i choose Ignore the help file comes up. As a workaround for
> the moment this helps, but try to fix it because it is very annoying.
> Again hot wises for the new year!
> Best Regards
> Dionisis
>
>
> Ï "Ignacio Ortiz de Zúñiga" <NoNameToAvoidSpam@xailer.com> Ýãñáøå óôï
> ìÞíõìá news:[email=49624d8b@svctag-j7w3v3j....]49624d8b@svctag-j7w3v3j....[/email]
>> Más información en el siguiente enlace: http://xailer.info/esp/?p=111
>> ------------------------------------------------------------ ------
>> Further information on this link: http://xailer.info/eng/?p=37
>>
>> http://www.xailer.com
>>
>>
>
>
>

Hello again Ignacio
You have right, the error arises only with no project in ide. Selecting the
Open Last Project option the tool choices
work without any problem.
Best regards
Dionisis
Ο "Ignacio Ortiz de Zϊρiga" <NoNameToAvoidSpam@xailer.com> έγραψε στο μήνυμα
news:496483c3$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
> Dionisis,
>
> I think I found and fix the problem, it should only arise when there is no
> active project. Please confirm. TIA.
>
> Regards,
>
> --
> Ignacio Ortiz de Zϊρiga
> Xailer support / Soporte de Xailer
> http://www.xailer.com
> http://www.xailer.info
> "Dionisis Divaris" <info@sgs-soft.gr> escribiσ en el mensaje
> news:49626a8f$[email=1@svctag-j7w3v3j....]1@svctag-j7w3v3j....[/email]
>> Happy New Year Ignacio,Jose and all Xailer's
>>
>> I have problem whwn launcing a configurable tool.
>> For example i have xHarbour Documantation as a configurable tool. When i
>> try to open through the tools menu i get an error (see ataching error
>> log). When i choose Ignore the help file comes up. As a workaround for
>> the moment this helps, but try to fix it because it is very annoying.
>> Again hot wises for the new year!
>> Best Regards
>> Dionisis
>>
>>
>> Ο "Ignacio Ortiz de Zϊρiga" <NoNameToAvoidSpam@xailer.com> έγραψε στο
>> μήνυμα news:[email=49624d8b@svctag-j7w3v3j....]49624d8b@svctag-j7w3v3j....[/email]
>>> Mαs informaciσn en el siguiente enlace: http://xailer.info/esp/?p=111
>>> ------------------------------------------------------------ ------
>>> Further information on this link: http://xailer.info/eng/?p=37
>>>
>>> http://www.xailer.com
>>>
>>>
>>
>>
>>
>
>

Ignacio,
When I open my 1.9 project in 2.0 beta, I see all the prg files and can look
at all the forms, but when I try to compile it tells me "path not found". In
Project Properties, under directories, there is the correct entries for
Root, Source, Include, Resource, and Obj. I am guessing that Xailer can't
find the new version of xHarbour required with 2.0. Does xHarbour have to be
installed in a specific directory, or is there a place in Xailer 2.0beta to
tell it where to find xHarbour?
Thanks,
Gary

I got it to work by putting the new release of xHarbour in an "xHarbour"
folder in the root directory.
"Gary S. Rogers" <g.s.rogers@att.net> wrote in message
news:[email=49679cbb@svctag-j7w3v3j....]49679cbb@svctag-j7w3v3j....[/email]
> Ignacio,
>
> When I open my 1.9 project in 2.0 beta, I see all the prg files and can
> look at all the forms, but when I try to compile it tells me "path not
> found". In Project Properties, under directories, there is the correct
> entries for Root, Source, Include, Resource, and Obj. I am guessing that
> Xailer can't find the new version of xHarbour required with 2.0. Does
> xHarbour have to be installed in a specific directory, or is there a place
> in Xailer 2.0beta to tell it where to find xHarbour?
>
> Thanks,
> Gary