Xailer & OZ Software

Hello Jose
Responding to your request about which characters using for the comments
here is the info:
In code editor i use the courier font for comments and i have no problems
,to display the correct characters( with this font only , all other fonts
have the same problem as described above).
I see in a thread that the problem with = and space already fixed.
But the problem in preview and print mode still exists.
The only correct hard copy of source is with standard ehglish character
set. I beleave it must be in the editor character selection another
selection
for the characters Script also (English , Greek , etc.)
I hope to help you to fix this problem
Trully Your's
Dionisis

Dionisis,
> Responding to your request about which characters using for the comments
> here is the info:
>
> In code editor i use the courier font for comments and i have no problems
> ,to display the correct characters( with this font only , all other fonts
> have the same problem as described above).
> I see in a thread that the problem with = and space already fixed.
> But the problem in preview and print mode still exists.
> The only correct hard copy of source is with standard ehglish character
> set. I beleave it must be in the editor character selection another
> selection
> for the characters Script also (English , Greek , etc.)
>
> I hope to help you to fix this problem
Sorry for the delay... we'll try to fix it ASAP. Tomorrow, I'll make some
tests, and if I need some extra info I'll ask you. Thanks.
--
Regards,
Jose F. Gimenez
http://www.xailer.com

Dionisis,
> Responding to your request about which characters using for the comments
> here is the info:
>
> In code editor i use the courier font for comments and i have no problems
> ,to display the correct characters( with this font only , all other fonts
> have the same problem as described above).
> I see in a thread that the problem with = and space already fixed.
> But the problem in preview and print mode still exists.
> The only correct hard copy of source is with standard ehglish character
> set. I beleave it must be in the editor character selection another
> selection
> for the characters Script also (English , Greek , etc.)
>
> I hope to help you to fix this problem
Sorry for the delay... we'll try to fix it ASAP. Tomorrow, I'll make some
tests, and if I need some extra info I'll ask you. Thanks.
--
Regards,
Jose F. Gimenez
http://www.xailer.com

Many thanks Jose for your attention. I will stay tuned.
TIA
Dionisis
Ï "Jose F. Gimenez" <jfgimenez@wanadoo.es> Ýãñáøå óôï ìÞíõìá
news:449eed8f$[email=1@ozsrvnegro.ozlan.local...]1@ozsrvnegro.ozlan.local...[/email]
> Dionisis,
>
>> Responding to your request about which characters using for the comments
>> here is the info:
>>
>> In code editor i use the courier font for comments and i have no
>> problems ,to display the correct characters( with this font only , all
>> other fonts
>> have the same problem as described above).
>> I see in a thread that the problem with = and space already fixed.
>> But the problem in preview and print mode still exists.
>> The only correct hard copy of source is with standard ehglish character
>> set. I beleave it must be in the editor character selection another
>> selection
>> for the characters Script also (English , Greek , etc.)
>>
>> I hope to help you to fix this problem
>
> Sorry for the delay... we'll try to fix it ASAP. Tomorrow, I'll make some
> tests, and if I need some extra info I'll ask you. Thanks.
>
> --
> Regards,
>
> Jose F. Gimenez
> http://www.xailer.com
>

Many thanks Jose for your attention. I will stay tuned.
TIA
Dionisis
Ï "Jose F. Gimenez" <jfgimenez@wanadoo.es> Ýãñáøå óôï ìÞíõìá
news:449eed8f$[email=1@ozsrvnegro.ozlan.local...]1@ozsrvnegro.ozlan.local...[/email]
> Dionisis,
>
>> Responding to your request about which characters using for the comments
>> here is the info:
>>
>> In code editor i use the courier font for comments and i have no
>> problems ,to display the correct characters( with this font only , all
>> other fonts
>> have the same problem as described above).
>> I see in a thread that the problem with = and space already fixed.
>> But the problem in preview and print mode still exists.
>> The only correct hard copy of source is with standard ehglish character
>> set. I beleave it must be in the editor character selection another
>> selection
>> for the characters Script also (English , Greek , etc.)
>>
>> I hope to help you to fix this problem
>
> Sorry for the delay... we'll try to fix it ASAP. Tomorrow, I'll make some
> tests, and if I need some extra info I'll ask you. Thanks.
>
> --
> Regards,
>
> Jose F. Gimenez
> http://www.xailer.com
>

Dionisis,
please, download again (if you have already downloaded it) the file
http://www.xailer.com/files/ide.zip and add this line under the [EDITOR]
section of the file xailerbinxailer.cfg:
Charset=161
Then, run Xailer and test if it shows greek characters correctly. If so,
I'll add an option in the editor's configuration dialog.
--
Regards,
Jose F. Gimenez
http://www.xailer.com

Dionisis,
please, download again (if you have already downloaded it) the file
http://www.xailer.com/files/ide.zip and add this line under the [EDITOR]
section of the file xailerbinxailer.cfg:
Charset=161
Then, run Xailer and test if it shows greek characters correctly. If so,
I'll add an option in the editor's configuration dialog.
--
Regards,
Jose F. Gimenez
http://www.xailer.com

JOSE
WORKS PERFECT !!!!!!!!!!!!!
Many - Many Thanks
Regards
Dionisis
Ï "Jose F. Gimenez" <jfgimenez@wanadoo.es> Ýãñáøå óôï ìÞíõìá
news:44a18dd7$[email=1@news.xailer.com...]1@news.xailer.com...[/email]
> Dionisis,
>
> please, download again (if you have already downloaded it) the file
> http://www.xailer.com/files/ide.zip and add this line under the [EDITOR]
> section of the file xailerbinxailer.cfg:
>
> Charset=161
>
> Then, run Xailer and test if it shows greek characters correctly. If so,
> I'll add an option in the editor's configuration dialog.
>
> --
> Regards,
>
> Jose F. Gimenez
> http://www.xailer.com
>

JOSE
WORKS PERFECT !!!!!!!!!!!!!
Many - Many Thanks
Regards
Dionisis
Ï "Jose F. Gimenez" <jfgimenez@wanadoo.es> Ýãñáøå óôï ìÞíõìá
news:44a18dd7$[email=1@news.xailer.com...]1@news.xailer.com...[/email]
> Dionisis,
>
> please, download again (if you have already downloaded it) the file
> http://www.xailer.com/files/ide.zip and add this line under the [EDITOR]
> section of the file xailerbinxailer.cfg:
>
> Charset=161
>
> Then, run Xailer and test if it shows greek characters correctly. If so,
> I'll add an option in the editor's configuration dialog.
>
> --
> Regards,
>
> Jose F. Gimenez
> http://www.xailer.com
>

Dionisis,
> WORKS PERFECT !!!!!!!!!!!!!
;-)))
Well, now we'll add it to the editor's option dialog. Thanks.
--
Regards,
Jose F. Gimenez
http://www.xailer.com

Dionisis,
> WORKS PERFECT !!!!!!!!!!!!!
;-)))
Well, now we'll add it to the editor's option dialog. Thanks.
--
Regards,
Jose F. Gimenez
http://www.xailer.com