Xailer & OZ Software

Jose, Ignacio good morning
I have notice that the program execution don't respect the lSingleInstance
setting nor the Project Property Allow multiple application's instances.
This behaviour notice on both windows XP and Vista.
This is very serious because some programs needs to run as single instance
ONLY, as databases not shared etc.
Please try to fix ASAP because i have 3 project to get on market. Attached
photos show the problem.
Many Thanks
Dionisis


Attached files

Dionisis,
are you really shure? I can't even confirm that.
The lSingleInstance setting in the Project property will be observed here on
Xailer 1.9.8 and 2.0 as well on both Windows XP and Vista.
If the Project property checkbox isn't checked then I can't run the
application more than once simultaneously.
Regards
Ingo
"Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
news:[email=491e879e@ozsrv2.ozlan.local...]491e879e@ozsrv2.ozlan.local...[/email]
> Jose, Ignacio good morning
>
> I have notice that the program execution don't respect the lSingleInstance
> setting nor the Project Property Allow multiple application's instances.
> This behaviour notice on both windows XP and Vista.
> This is very serious because some programs needs to run as single instance
> ONLY, as databases not shared etc.
> Please try to fix ASAP because i have 3 project to get on market. Attached
> photos show the problem.
>
> Many Thanks
> Dionisis
>
>

Dionisis,
are you really shure? I can't even confirm that.
The lSingleInstance setting in the Project property will be observed here on
Xailer 1.9.8 and 2.0 as well on both Windows XP and Vista.
If the Project property checkbox isn't checked then I can't run the
application more than once simultaneously.
Regards
Ingo
"Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
news:[email=491e879e@ozsrv2.ozlan.local...]491e879e@ozsrv2.ozlan.local...[/email]
> Jose, Ignacio good morning
>
> I have notice that the program execution don't respect the lSingleInstance
> setting nor the Project Property Allow multiple application's instances.
> This behaviour notice on both windows XP and Vista.
> This is very serious because some programs needs to run as single instance
> ONLY, as databases not shared etc.
> Please try to fix ASAP because i have 3 project to get on market. Attached
> photos show the problem.
>
> Many Thanks
> Dionisis
>
>

Good morning Ingo
The attached images are taken today morning from my laptop. As you can see
i can run the program 3 times.
Best Regards
Dionisis
? "Ingo" <support@mandantwin.com> ?????? ??? ??????
news:491e9b4f$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Dionisis,
>
> are you really shure? I can't even confirm that.
> The lSingleInstance setting in the Project property will be observed here
> on Xailer 1.9.8 and 2.0 as well on both Windows XP and Vista.
> If the Project property checkbox isn't checked then I can't run the
> application more than once simultaneously.
>
> Regards
>
> Ingo
>
> "Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
> news:[email=491e879e@ozsrv2.ozlan.local...]491e879e@ozsrv2.ozlan.local...[/email]
>> Jose, Ignacio good morning
>>
>> I have notice that the program execution don't respect the
>> lSingleInstance setting nor the Project Property Allow multiple
>> application's instances. This behaviour notice on both windows XP and
>> Vista.
>> This is very serious because some programs needs to run as single
>> instance ONLY, as databases not shared etc.
>> Please try to fix ASAP because i have 3 project to get on market.
>> Attached photos show the problem.
>>
>> Many Thanks
>> Dionisis
>>
>>
>

Good morning Ingo
The attached images are taken today morning from my laptop. As you can see
i can run the program 3 times.
Best Regards
Dionisis
? "Ingo" <support@mandantwin.com> ?????? ??? ??????
news:491e9b4f$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Dionisis,
>
> are you really shure? I can't even confirm that.
> The lSingleInstance setting in the Project property will be observed here
> on Xailer 1.9.8 and 2.0 as well on both Windows XP and Vista.
> If the Project property checkbox isn't checked then I can't run the
> application more than once simultaneously.
>
> Regards
>
> Ingo
>
> "Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
> news:[email=491e879e@ozsrv2.ozlan.local...]491e879e@ozsrv2.ozlan.local...[/email]
>> Jose, Ignacio good morning
>>
>> I have notice that the program execution don't respect the
>> lSingleInstance setting nor the Project Property Allow multiple
>> application's instances. This behaviour notice on both windows XP and
>> Vista.
>> This is very serious because some programs needs to run as single
>> instance ONLY, as databases not shared etc.
>> Please try to fix ASAP because i have 3 project to get on market.
>> Attached photos show the problem.
>>
>> Many Thanks
>> Dionisis
>>
>>
>

Igno
Use the following links to see in motion
They are valid for a few hours
http://www.sgs-soft.gr/TEST/IDE.avi
http://www.sgs-soft.gr/TEST/RUN_EXE.avi
Best Regards
Dionisis
? "Dionisis Divaris" <info@sgs-soft.gr> ?????? ??? ??????
news:491ea84d$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Good morning Ingo
> The attached images are taken today morning from my laptop. As you can see
> i can run the program 3 times.
>
> Best Regards
> Dionisis
>
>
> ? "Ingo" <support@mandantwin.com> ?????? ??? ??????
> news:491e9b4f$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>> Dionisis,
>>
>> are you really shure? I can't even confirm that.
>> The lSingleInstance setting in the Project property will be observed here
>> on Xailer 1.9.8 and 2.0 as well on both Windows XP and Vista.
>> If the Project property checkbox isn't checked then I can't run the
>> application more than once simultaneously.
>>
>> Regards
>>
>> Ingo
>>
>> "Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
>> news:[email=491e879e@ozsrv2.ozlan.local...]491e879e@ozsrv2.ozlan.local...[/email]
>>> Jose, Ignacio good morning
>>>
>>> I have notice that the program execution don't respect the
>>> lSingleInstance setting nor the Project Property Allow multiple
>>> application's instances. This behaviour notice on both windows XP and
>>> Vista.
>>> This is very serious because some programs needs to run as single
>>> instance ONLY, as databases not shared etc.
>>> Please try to fix ASAP because i have 3 project to get on market.
>>> Attached photos show the problem.
>>>
>>> Many Thanks
>>> Dionisis
>>>
>>>
>>
>

Igno
Use the following links to see in motion
They are valid for a few hours
http://www.sgs-soft.gr/TEST/IDE.avi
http://www.sgs-soft.gr/TEST/RUN_EXE.avi
Best Regards
Dionisis
? "Dionisis Divaris" <info@sgs-soft.gr> ?????? ??? ??????
news:491ea84d$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Good morning Ingo
> The attached images are taken today morning from my laptop. As you can see
> i can run the program 3 times.
>
> Best Regards
> Dionisis
>
>
> ? "Ingo" <support@mandantwin.com> ?????? ??? ??????
> news:491e9b4f$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>> Dionisis,
>>
>> are you really shure? I can't even confirm that.
>> The lSingleInstance setting in the Project property will be observed here
>> on Xailer 1.9.8 and 2.0 as well on both Windows XP and Vista.
>> If the Project property checkbox isn't checked then I can't run the
>> application more than once simultaneously.
>>
>> Regards
>>
>> Ingo
>>
>> "Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
>> news:[email=491e879e@ozsrv2.ozlan.local...]491e879e@ozsrv2.ozlan.local...[/email]
>>> Jose, Ignacio good morning
>>>
>>> I have notice that the program execution don't respect the
>>> lSingleInstance setting nor the Project Property Allow multiple
>>> application's instances. This behaviour notice on both windows XP and
>>> Vista.
>>> This is very serious because some programs needs to run as single
>>> instance ONLY, as databases not shared etc.
>>> Please try to fix ASAP because i have 3 project to get on market.
>>> Attached photos show the problem.
>>>
>>> Many Thanks
>>> Dionisis
>>>
>>>
>>
>

Dionisis,
sorry, the download is too slow. IDA.avi needs more the 10 minutes to
download it. Therefore I stopped it.
Try the attached sample. I can run it once only simultaneously.
Could you try it yourself?
Regards
Ingo
"Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
news:491eba24$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Igno
> Use the following links to see in motion
> They are valid for a few hours
> http://www.sgs-soft.gr/TEST/IDE.avi
>
> http://www.sgs-soft.gr/TEST/RUN_EXE.avi
>
> Best Regards
> Dionisis
>
>
> ? "Dionisis Divaris" <info@sgs-soft.gr> ?????? ??? ??????
> news:491ea84d$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>> Good morning Ingo
>> The attached images are taken today morning from my laptop. As you can
>> see i can run the program 3 times.
>>
>> Best Regards
>> Dionisis
>>
>>
>> ? "Ingo" <support@mandantwin.com> ?????? ??? ??????
>> news:491e9b4f$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>> Dionisis,
>>>
>>> are you really shure? I can't even confirm that.
>>> The lSingleInstance setting in the Project property will be observed
>>> here on Xailer 1.9.8 and 2.0 as well on both Windows XP and Vista.
>>> If the Project property checkbox isn't checked then I can't run the
>>> application more than once simultaneously.
>>>
>>> Regards
>>>
>>> Ingo
>>>
>>> "Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
>>> news:[email=491e879e@ozsrv2.ozlan.local...]491e879e@ozsrv2.ozlan.local...[/email]
>>>> Jose, Ignacio good morning
>>>>
>>>> I have notice that the program execution don't respect the
>>>> lSingleInstance setting nor the Project Property Allow multiple
>>>> application's instances. This behaviour notice on both windows XP and
>>>> Vista.
>>>> This is very serious because some programs needs to run as single
>>>> instance ONLY, as databases not shared etc.
>>>> Please try to fix ASAP because i have 3 project to get on market.
>>>> Attached photos show the problem.
>>>>
>>>> Many Thanks
>>>> Dionisis
>>>>
>>>>
>>>
>>
>
>
--

Attached files test75.zip (1.6 KB)Â

Dionisis,
sorry, the download is too slow. IDA.avi needs more the 10 minutes to
download it. Therefore I stopped it.
Try the attached sample. I can run it once only simultaneously.
Could you try it yourself?
Regards
Ingo
"Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
news:491eba24$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Igno
> Use the following links to see in motion
> They are valid for a few hours
> http://www.sgs-soft.gr/TEST/IDE.avi
>
> http://www.sgs-soft.gr/TEST/RUN_EXE.avi
>
> Best Regards
> Dionisis
>
>
> ? "Dionisis Divaris" <info@sgs-soft.gr> ?????? ??? ??????
> news:491ea84d$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>> Good morning Ingo
>> The attached images are taken today morning from my laptop. As you can
>> see i can run the program 3 times.
>>
>> Best Regards
>> Dionisis
>>
>>
>> ? "Ingo" <support@mandantwin.com> ?????? ??? ??????
>> news:491e9b4f$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>> Dionisis,
>>>
>>> are you really shure? I can't even confirm that.
>>> The lSingleInstance setting in the Project property will be observed
>>> here on Xailer 1.9.8 and 2.0 as well on both Windows XP and Vista.
>>> If the Project property checkbox isn't checked then I can't run the
>>> application more than once simultaneously.
>>>
>>> Regards
>>>
>>> Ingo
>>>
>>> "Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
>>> news:[email=491e879e@ozsrv2.ozlan.local...]491e879e@ozsrv2.ozlan.local...[/email]
>>>> Jose, Ignacio good morning
>>>>
>>>> I have notice that the program execution don't respect the
>>>> lSingleInstance setting nor the Project Property Allow multiple
>>>> application's instances. This behaviour notice on both windows XP and
>>>> Vista.
>>>> This is very serious because some programs needs to run as single
>>>> instance ONLY, as databases not shared etc.
>>>> Please try to fix ASAP because i have 3 project to get on market.
>>>> Attached photos show the problem.
>>>>
>>>> Many Thanks
>>>> Dionisis
>>>>
>>>>
>>>
>>
>
>
--

Attached files test75.zip (1.6 KB)Â

Dionisis,
is it possible, that do you have inserted 'Application:lSingleInstance :=
..F.' in another module of your applications beside the main-module?
Regards
Ingo
"Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
news:491eba24$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Igno
> Use the following links to see in motion
> They are valid for a few hours
> http://www.sgs-soft.gr/TEST/IDE.avi
>
> http://www.sgs-soft.gr/TEST/RUN_EXE.avi
>
> Best Regards
> Dionisis
>
>
> ? "Dionisis Divaris" <info@sgs-soft.gr> ?????? ??? ??????
> news:491ea84d$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>> Good morning Ingo
>> The attached images are taken today morning from my laptop. As you can
>> see i can run the program 3 times.
>>
>> Best Regards
>> Dionisis
>>
>>
>> ? "Ingo" <support@mandantwin.com> ?????? ??? ??????
>> news:491e9b4f$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>> Dionisis,
>>>
>>> are you really shure? I can't even confirm that.
>>> The lSingleInstance setting in the Project property will be observed
>>> here on Xailer 1.9.8 and 2.0 as well on both Windows XP and Vista.
>>> If the Project property checkbox isn't checked then I can't run the
>>> application more than once simultaneously.
>>>
>>> Regards
>>>
>>> Ingo
>>>
>>> "Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
>>> news:[email=491e879e@ozsrv2.ozlan.local...]491e879e@ozsrv2.ozlan.local...[/email]
>>>> Jose, Ignacio good morning
>>>>
>>>> I have notice that the program execution don't respect the
>>>> lSingleInstance setting nor the Project Property Allow multiple
>>>> application's instances. This behaviour notice on both windows XP and
>>>> Vista.
>>>> This is very serious because some programs needs to run as single
>>>> instance ONLY, as databases not shared etc.
>>>> Please try to fix ASAP because i have 3 project to get on market.
>>>> Attached photos show the problem.
>>>>
>>>> Many Thanks
>>>> Dionisis
>>>>
>>>>
>>>
>>
>
>

Dionisis,
is it possible, that do you have inserted 'Application:lSingleInstance :=
..F.' in another module of your applications beside the main-module?
Regards
Ingo
"Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
news:491eba24$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Igno
> Use the following links to see in motion
> They are valid for a few hours
> http://www.sgs-soft.gr/TEST/IDE.avi
>
> http://www.sgs-soft.gr/TEST/RUN_EXE.avi
>
> Best Regards
> Dionisis
>
>
> ? "Dionisis Divaris" <info@sgs-soft.gr> ?????? ??? ??????
> news:491ea84d$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>> Good morning Ingo
>> The attached images are taken today morning from my laptop. As you can
>> see i can run the program 3 times.
>>
>> Best Regards
>> Dionisis
>>
>>
>> ? "Ingo" <support@mandantwin.com> ?????? ??? ??????
>> news:491e9b4f$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>> Dionisis,
>>>
>>> are you really shure? I can't even confirm that.
>>> The lSingleInstance setting in the Project property will be observed
>>> here on Xailer 1.9.8 and 2.0 as well on both Windows XP and Vista.
>>> If the Project property checkbox isn't checked then I can't run the
>>> application more than once simultaneously.
>>>
>>> Regards
>>>
>>> Ingo
>>>
>>> "Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
>>> news:[email=491e879e@ozsrv2.ozlan.local...]491e879e@ozsrv2.ozlan.local...[/email]
>>>> Jose, Ignacio good morning
>>>>
>>>> I have notice that the program execution don't respect the
>>>> lSingleInstance setting nor the Project Property Allow multiple
>>>> application's instances. This behaviour notice on both windows XP and
>>>> Vista.
>>>> This is very serious because some programs needs to run as single
>>>> instance ONLY, as databases not shared etc.
>>>> Please try to fix ASAP because i have 3 project to get on market.
>>>> Attached photos show the problem.
>>>>
>>>> Many Thanks
>>>> Dionisis
>>>>
>>>>
>>>
>>
>
>

Ingo
Your sample code running ok but it is only one form . My programs have more
than 30 forms. I check also my code for accidental activation of
lSingleInstance property for more than one time, i could not found any.
Ok this problem needs more invastigation
Good night
Best Regards
Dionisis
? "Ingo" <support@mandantwin.com> ?????? ??? ??????
news:491ebfac$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Dionisis,
> sorry, the download is too slow. IDA.avi needs more the 10 minutes to
> download it. Therefore I stopped it.
> Try the attached sample. I can run it once only simultaneously.
>
> Could you try it yourself?
>
> Regards
>
> Ingo
>
> "Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
> news:491eba24$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>> Igno
>> Use the following links to see in motion
>> They are valid for a few hours
>> http://www.sgs-soft.gr/TEST/IDE.avi
>>
>> http://www.sgs-soft.gr/TEST/RUN_EXE.avi
>>
>> Best Regards
>> Dionisis
>>
>>
>> ? "Dionisis Divaris" <info@sgs-soft.gr> ?????? ??? ??????
>> news:491ea84d$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>> Good morning Ingo
>>> The attached images are taken today morning from my laptop. As you can
>>> see i can run the program 3 times.
>>>
>>> Best Regards
>>> Dionisis
>>>
>>>
>>> ? "Ingo" <support@mandantwin.com> ?????? ??? ??????
>>> news:491e9b4f$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>>> Dionisis,
>>>>
>>>> are you really shure? I can't even confirm that.
>>>> The lSingleInstance setting in the Project property will be observed
>>>> here on Xailer 1.9.8 and 2.0 as well on both Windows XP and Vista.
>>>> If the Project property checkbox isn't checked then I can't run the
>>>> application more than once simultaneously.
>>>>
>>>> Regards
>>>>
>>>> Ingo
>>>>
>>>> "Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
>>>> news:[email=491e879e@ozsrv2.ozlan.local...]491e879e@ozsrv2.ozlan.local...[/email]
>>>>> Jose, Ignacio good morning
>>>>>
>>>>> I have notice that the program execution don't respect the
>>>>> lSingleInstance setting nor the Project Property Allow multiple
>>>>> application's instances. This behaviour notice on both windows XP and
>>>>> Vista.
>>>>> This is very serious because some programs needs to run as single
>>>>> instance ONLY, as databases not shared etc.
>>>>> Please try to fix ASAP because i have 3 project to get on market.
>>>>> Attached photos show the problem.
>>>>>
>>>>> Many Thanks
>>>>> Dionisis
>>>>>
>>>>>
>>>>
>>>
>>
>>
>

Ingo
Your sample code running ok but it is only one form . My programs have more
than 30 forms. I check also my code for accidental activation of
lSingleInstance property for more than one time, i could not found any.
Ok this problem needs more invastigation
Good night
Best Regards
Dionisis
? "Ingo" <support@mandantwin.com> ?????? ??? ??????
news:491ebfac$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Dionisis,
> sorry, the download is too slow. IDA.avi needs more the 10 minutes to
> download it. Therefore I stopped it.
> Try the attached sample. I can run it once only simultaneously.
>
> Could you try it yourself?
>
> Regards
>
> Ingo
>
> "Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
> news:491eba24$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>> Igno
>> Use the following links to see in motion
>> They are valid for a few hours
>> http://www.sgs-soft.gr/TEST/IDE.avi
>>
>> http://www.sgs-soft.gr/TEST/RUN_EXE.avi
>>
>> Best Regards
>> Dionisis
>>
>>
>> ? "Dionisis Divaris" <info@sgs-soft.gr> ?????? ??? ??????
>> news:491ea84d$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>> Good morning Ingo
>>> The attached images are taken today morning from my laptop. As you can
>>> see i can run the program 3 times.
>>>
>>> Best Regards
>>> Dionisis
>>>
>>>
>>> ? "Ingo" <support@mandantwin.com> ?????? ??? ??????
>>> news:491e9b4f$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>>> Dionisis,
>>>>
>>>> are you really shure? I can't even confirm that.
>>>> The lSingleInstance setting in the Project property will be observed
>>>> here on Xailer 1.9.8 and 2.0 as well on both Windows XP and Vista.
>>>> If the Project property checkbox isn't checked then I can't run the
>>>> application more than once simultaneously.
>>>>
>>>> Regards
>>>>
>>>> Ingo
>>>>
>>>> "Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
>>>> news:[email=491e879e@ozsrv2.ozlan.local...]491e879e@ozsrv2.ozlan.local...[/email]
>>>>> Jose, Ignacio good morning
>>>>>
>>>>> I have notice that the program execution don't respect the
>>>>> lSingleInstance setting nor the Project Property Allow multiple
>>>>> application's instances. This behaviour notice on both windows XP and
>>>>> Vista.
>>>>> This is very serious because some programs needs to run as single
>>>>> instance ONLY, as databases not shared etc.
>>>>> Please try to fix ASAP because i have 3 project to get on market.
>>>>> Attached photos show the problem.
>>>>>
>>>>> Many Thanks
>>>>> Dionisis
>>>>>
>>>>>
>>>>
>>>
>>
>>
>

Ingo
Finaly found the problem. Try your sample with Project Property
Descpription Empty and see that you can run the program unlimited times.
So the key for correct running any program as singlr instance, is
Description MUST not is EMPTY.
OK
Problem solved, going to sleep
Best Regards
Dionisis
Ο "Ingo" <support@mandantwin.com> έγραψε στο μήνυμα
news:491ecd18$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Dionisis,
>
> is it possible, that do you have inserted 'Application:lSingleInstance :=
> .F.' in another module of your applications beside the main-module?
>
> Regards
>
> Ingo
>
>
> "Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
> news:491eba24$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>> Igno
>> Use the following links to see in motion
>> They are valid for a few hours
>> http://www.sgs-soft.gr/TEST/IDE.avi
>>
>> http://www.sgs-soft.gr/TEST/RUN_EXE.avi
>>
>> Best Regards
>> Dionisis
>>
>>
>> ? "Dionisis Divaris" <info@sgs-soft.gr> ?????? ??? ??????
>> news:491ea84d$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>> Good morning Ingo
>>> The attached images are taken today morning from my laptop. As you can
>>> see i can run the program 3 times.
>>>
>>> Best Regards
>>> Dionisis
>>>
>>>
>>> ? "Ingo" <support@mandantwin.com> ?????? ??? ??????
>>> news:491e9b4f$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>>> Dionisis,
>>>>
>>>> are you really shure? I can't even confirm that.
>>>> The lSingleInstance setting in the Project property will be observed
>>>> here on Xailer 1.9.8 and 2.0 as well on both Windows XP and Vista.
>>>> If the Project property checkbox isn't checked then I can't run the
>>>> application more than once simultaneously.
>>>>
>>>> Regards
>>>>
>>>> Ingo
>>>>
>>>> "Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
>>>> news:[email=491e879e@ozsrv2.ozlan.local...]491e879e@ozsrv2.ozlan.local...[/email]
>>>>> Jose, Ignacio good morning
>>>>>
>>>>> I have notice that the program execution don't respect the
>>>>> lSingleInstance setting nor the Project Property Allow multiple
>>>>> application's instances. This behaviour notice on both windows XP and
>>>>> Vista.
>>>>> This is very serious because some programs needs to run as single
>>>>> instance ONLY, as databases not shared etc.
>>>>> Please try to fix ASAP because i have 3 project to get on market.
>>>>> Attached photos show the problem.
>>>>>
>>>>> Many Thanks
>>>>> Dionisis
>>>>>
>>>>>
>>>>
>>>
>>
>>
>
--

Attached files test75.zip (2 KB)Â

Ingo
Finaly found the problem. Try your sample with Project Property
Descpription Empty and see that you can run the program unlimited times.
So the key for correct running any program as singlr instance, is
Description MUST not is EMPTY.
OK
Problem solved, going to sleep
Best Regards
Dionisis
Ο "Ingo" <support@mandantwin.com> έγραψε στο μήνυμα
news:491ecd18$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Dionisis,
>
> is it possible, that do you have inserted 'Application:lSingleInstance :=
> .F.' in another module of your applications beside the main-module?
>
> Regards
>
> Ingo
>
>
> "Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
> news:491eba24$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>> Igno
>> Use the following links to see in motion
>> They are valid for a few hours
>> http://www.sgs-soft.gr/TEST/IDE.avi
>>
>> http://www.sgs-soft.gr/TEST/RUN_EXE.avi
>>
>> Best Regards
>> Dionisis
>>
>>
>> ? "Dionisis Divaris" <info@sgs-soft.gr> ?????? ??? ??????
>> news:491ea84d$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>> Good morning Ingo
>>> The attached images are taken today morning from my laptop. As you can
>>> see i can run the program 3 times.
>>>
>>> Best Regards
>>> Dionisis
>>>
>>>
>>> ? "Ingo" <support@mandantwin.com> ?????? ??? ??????
>>> news:491e9b4f$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>>> Dionisis,
>>>>
>>>> are you really shure? I can't even confirm that.
>>>> The lSingleInstance setting in the Project property will be observed
>>>> here on Xailer 1.9.8 and 2.0 as well on both Windows XP and Vista.
>>>> If the Project property checkbox isn't checked then I can't run the
>>>> application more than once simultaneously.
>>>>
>>>> Regards
>>>>
>>>> Ingo
>>>>
>>>> "Dionisis Divaris" <info@sgs-soft.gr> schrieb im Newsbeitrag
>>>> news:[email=491e879e@ozsrv2.ozlan.local...]491e879e@ozsrv2.ozlan.local...[/email]
>>>>> Jose, Ignacio good morning
>>>>>
>>>>> I have notice that the program execution don't respect the
>>>>> lSingleInstance setting nor the Project Property Allow multiple
>>>>> application's instances. This behaviour notice on both windows XP and
>>>>> Vista.
>>>>> This is very serious because some programs needs to run as single
>>>>> instance ONLY, as databases not shared etc.
>>>>> Please try to fix ASAP because i have 3 project to get on market.
>>>>> Attached photos show the problem.
>>>>>
>>>>> Many Thanks
>>>>> Dionisis
>>>>>
>>>>>
>>>>
>>>
>>
>>
>
--

Attached files test75.zip (2 KB)Â

Dionisis,
> Description MUST not is EMPTY.
Yes, it's correct, since Application:cTitle is used to name the mutex which
controls the single instance execution. Sorry if it caused you a problem.
We'll explain it in the help file.
--
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info

Dionisis,
> Description MUST not is EMPTY.
Yes, it's correct, since Application:cTitle is used to name the mutex which
controls the single instance execution. Sorry if it caused you a problem.
We'll explain it in the help file.
--
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info