Xailer & OZ Software

Publicado: **Lun Jul 15, 2013 11:40 am**

This is a multi-part message in MIME format.
------=_NextPart_000_0082_01CE8150.0ADA2B80
Content-Type: multipart/alternative;
boundary="----=_NextPart_001_0083_01CE8150.0ADA2B80"
------=_NextPart_001_0083_01CE8150.0ADA2B80
Content-Type: text/plain;
charset="iso-8859-15"
Content-Transfer-Encoding: quoted-printable
Dear Jose Gimenez,
I was using TwainControlX.ocx from ScianSoft as ActiveX component in my=20
project built with xHarbour and BCC in Xailer 2.7.5 without any problem.
Now compiling and linking this project under Xailer 3.02 with Harbour =
and=20
minGW this GPF occurs.
I am using the libhbwin.a modified by you. The same GPF occurs too with =
the unmodified=20
libhbwin.a.
Could you help me again please?=20
Regards
Ingo
------=_NextPart_001_0083_01CE8150.0ADA2B80
Content-Type: text/html;
charset="iso-8859-15"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-15" =
http-equiv=3DContent-Type>
<META name=3DGENERATOR content=3D"MSHTML 9.00.8112.16496">
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV><FONT size=3D2>Dear Jose Gimenez,<BR><BR>I was using =
TwainControlX.ocx from=20
ScianSoft as ActiveX component in my <BR>project built with xHarbour and =
BCC in=20
Xailer 2.7.5 without any problem.<BR><BR>Now compiling and linking this =
project=20
under Xailer 3.02 with Harbour and <BR>minGW this GPF =
occurs.</FONT></DIV>
<DIV><FONT size=3D2></FONT>Â</DIV>
<DIV><IMG src=3D"cid:[email=556161443E9F44ABA1E7DB4D46EDCB1F@IngoHP]556161443E9F44ABA1E7DB4D46EDCB1F@IngoHP[/email]"></DIV>
<DIV><FONT size=3D2></FONT><BR><FONT size=3D2>I am using the libhbwin.a =
modified by=20
you. The same GPF occurs too with the unmodified =
<BR>libhbwin.a.<BR><BR>Could=20
you help me again please? </FONT></DIV>
<DIV><BR><FONT =
size=3D2>Regards<BR><BR>Ingo<BR></FONT></DIV></BODY> </HTML>
------=_NextPart_001_0083_01CE8150.0ADA2B80--
------=_NextPart_000_0082_01CE8150.0ADA2B80
Content-Type: application/octet-stream;
name="OLE.jpg"
Content-Transfer-Encoding: base64
Content-ID: <[email=556161443E9F44ABA1E7DB4D46EDCB1F@IngoHP]556161443E9F44ABA1E7DB4D46EDCB1F@IngoHP[/email]>
/9j/4AAQSkZJRgABAAEAYABgAAD//gAfTEVBRCBUZWNobm9sb2dpZXMgSW5j LiBWMS4wMQD/2wBD
AAUFBQgFCAwHBwwMCQkJDA0MDAwMDQ0NDQ0NDQ0NDQ0NDQ0NDQ0NDQ0NDQ0N DQ0NDQ0NDQ0NDQ0N
DQ0NDQ0NDQ3/xADSAAABBQEBAQEBAQAAAAAAAAAAAQIDBAUGBwgJCgsQAAIB AwMCBAMFBQQEAAAB
fQECAwAEEQUSITFBBhNRYQcicRQygZGhCCNCscEVUtHwJDNicoIJChYXGBka JSYnKCkqNDU2Nzg5
OkNERUZHSElKU1RVVldYWVpjZGVmZ2hpanN0dXZ3eHl6g4SFhoeIiYqSk5SV lpeYmZqio6Slpqeo
qaqys7S1tre4ubrCw8TFxsfIycrS09TV1tfY2drh4uPk5ebn6Onq8fLz9PX2 9/j5+v/AAAsIAEwA
ogEBEQD/2gAIAQEAAD8A+vdT1CDSbWW+um8uC2jeWVsE7URSzHA5PAPAGT0H NcVN4o1ewsLnVr7T
YoLW3sri8jAvS8+YU8xIbiL7KqQSSpuy0M12kbKylmG1mzbj4gX1hDcJd2MK X8A094oo7x3t5YtR
uRaxObg2UckRjl3iRDavwoKM4Y7e5hv7i1spLzWI4LRoFkkkEE73EaxoNxbz ZLe1bO0ElfKABHDG
udTxVfXphtbGyR9Qlt47ueKe6MMNrBKziETTrbTSefLsYCKO2dVKS7pQqxvL uS+I7PTFt01ie106
6uhhIJrmIb5MhWWFnMbTAMwCkRqxDJujRjsFDxL4ysvDm2FpIJb55LVVszcR xzmO5uo7bzhH80hS
MyFiQhVihXcuSy7UOuadPePpkV1bvewrvltkmjaeNfl+Z4Q3mIvzpyygfMv9 4Z1hVTUL+20uBru9
litbeLBeWZ1jjQEhQWdyqrkkAZI5IHeuG1Dx4sEjS6fFFfadbR2013dx3IAS K6kZEe3VIpEufLRG
mnzNAFiKmMzO2wVJviJ9jDXVza7bCQXn2OaObfLcSWbMpjeFoo1hNxsdrUrP MHRcy+SxC1Y/4TO/
Wb+yWsoF1nzlRbf7Y/2Vomt3uPtH2v7H5oQCOSEr9jLfaFCY8tvNFRPiM80Y u7ez3WttHBJqLPcb
JLQzTSQvHHGsMiXDWxikefMsAEYUxGVm2DqtP8QSXeqXmlzWzWq2UMEyyySR HzkmkuY94SNnEcY+
zFlLuJGDfPFFt+bnp/iPZtNcf2f5GoWVjb211PdW90kirFNPcQzFBGkiu1sI BKyeYpdGYDDKqyeg
W93Dcs6wyJIYX8uQIwYxvhW2OATtfayttbB2spxhhm1RRRWRr2kprunXOmSM 0aXkEkBdfvIJEK7l
6crnI7HGDXlup+BtW1557m8j023u20i+00XMDys93JcpEkUlwGtUe3ji8pmE QmvSnnMqMdu59zUv
hzayaRJploivLdTWD3T3k1xdGaO1uIJHieW5a4laPyo5FihP7kM5G1A7muh1 LwxanRLvQ9LhhsYr
q2uYUjgjSKNHnjdd2yNVUZZsscc9awobbVnmi1/SoovNu7SG3vbG+ea12tA0 rI8cyW9wyvG8ssbK
bdo54ykkcqqqmWlrfhXWNQmuZ40sJDq2mpp92JpJwtrte4YvbgW7/a0Ium3R SGz3vCj70EhWKjqn
gXVJJJrW0FlJaXN9pt99ouHlF1GbH7IjRBFt3Ry0dqTHL5yFTK8RiwTKLvhv wRc6Jq0lzMiXEBur
y5huTqWoB4/tbSSFTpbI9iHUyNE0ySoXQCXYJCym/qfgb+0NUOp+ToTZkjfd caL5958gQZN59vjz
INv7uTyB5YCDa23na8VaNdamLO5sBC9xpt2t0kFwzRwTfupYSryJHM0TIsxl ikEUu2VFymCWXnNT
8MatqclwCLSGHWIrWO/HnTO1ubdmEn2Y/Zoxc+fEwiDSfY/IZfN2y58sZlz8 P9Sv7caZNLbRWlj9
teymQyPLJLcs7QG4hKRrElqsjowSec3J2yHycFDfbwzrT3w8RFbIamsigWn2 ib7N9nW3lg2fbPsn
m+YZJWuN/wBixgLb4xmc58Xw/wBStIZbCKS2kt9UjhF/KxlSSJ1mlluGtoRH Isq3CzNHGsk0H2ba
JMz5KDqNb8KzavLqmJEij1PS4bCM4ZmSRGvizumADGRdIAA+WxIDt+UnjtS8 PawI9Rubq3tEn1jT
rbSIobAz3CpJuuYzPM72sASBI5w5dlCxRx+X85CeZ6po1lNZNciVLaNZJ98T QKweSMRRIHuiw+e4
LIylgSDEsQzkHG1RRRWB4p1OTRdIvtRgCtLZ2lxOiuCULxRM6hwpUlSVG4Bl OM4Yda49vGd4uq/2
fsg8r+1oLDO19/ky6Qb9mz5mPMEw2qdu3yuChb563I/HeiyRTXAndYrZBIZH t7lElRn8tHtWeFRe
q8hVEa0M4dnjVCxlj3Ph8baXdQTXMBupltZVgmSOwvnnilaNZQj2yWzXCkIy liYsITtcq2RTNJ8T
jWdUe2tWjlsTptnfQSqHDubqW6TksQNmyBCqlFcMW3E5AWsfHemaeoW8ufOl kmvY41trK8Zm+xTe
XOghjW5kdrfcolkHySBXmRViDbL3/CaaWSiwPPdGW3S7Q21neXKCGRHeJ3e3 glSMyKjGNHKyORhE
JKg5OgfEbTtYs9PuJVntrjVkLQ25trt2ynleaQwtlDQxmaMm52rAVLOH2JIV 34PFmlTx28yXCiK9
tpbyB3V0Q20IjMsrM6qsSoJoyfNKNhshcBiOdvviTYWxsjBDezR6hdfZg/2D UY9q+RJMJYw1nmcN
tUKI+HVnlVykMpGh/wAJpp9lEGu7g3DvcXcKJaWV5JJ/osrJKv2eFbmdhbkL HNcgCBnww2LLGlJe
/EPQdP2+bckq9tHeBooLidBays6pcO8MMiRw5Rg8shVIzt8xl3LntUIPI/On 0UUUUUUVkeIdK/tz
TLvTN/k/bbea38zbu2ebG0e/bld23dnbuXOMZHWuUl8CrLfm/afg6jFqBj8r tHph04xb/N/iz53m
beP9XsP365GH4bReFtNljje0jFv5DW91aaIz6jut7mKe3N2bWaR9QAMaLOsd tA0vMpeNgWFXS/CG
oeLIbu7v5EUXOqC5VL7TZFt7qGKyjswZdMluIpo0EimW2W5lZ1MUU7rISpHf eFPBY8MSRyCfzxFp
tpp4HlCPP2WS4k83Adgu/wA/HlhcJsyGYNhW6X4J/sy+jvvtG/yX1Z9nl7c/ 2pdR3ON3mHHkeXsz
tPm7t37vG05ml/D6fS300R3cSx6XBFA7xW0sN3dLEjqI5rhbwxNbF2D/AGeW 2mCEMY3V2Drc8PeC
JdFbTjPdJcLpFrc2cQS3MReGf7LsMhNxN+8jFsd7KFSUvkJFsw2Pb/DGUxR2 WoXq3Fha6feabBFF
beRMILryRukna4mV5o0gVQywxIx+YxryDuXPhjV76G0+1X9q93pt2lzDMthI kbBYJrdlmh/tBizu
szt5kcsKq2P3RAwakfgW60+Vb3TL2OG8SbUn3T2jTwmHUrkXTxmJbmBxJC6R BJhMAwDb4iHUID4d
Rx211Zw3LBLvR49JBeMMyFTdk3LbXRXZ2uiTEqxqCpCsFYBfRbaL7PGkWd3l oq56ZwAM47Zx7/Wp
6KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKqX9nHfwNbS mRUkGCYZZYJBzn5Z
YHjlQ8dUdTjIJwTXiNh52laJeXdvdXguJdXm00XFxeXd2La3bVvsayRx3Us8 SyQwt8shTJZVaVnG
c2vFiTeEI7q2026vWjudE1Wcie8uLmWGe0jh8q5imuJpJ4SfOKOsbiPeInVV cMW1/HVxP9l0aOMX
s/2m/iSWKxumtLidPsN5IUE4ubPA3osrBrhA2zucKcTxv4mj0RLLT473+yJr W0fUjDe3yC4maHat
vYzTS3Epn+0OZVlImmDGH77jBPX6RrP9q65NPbyu1hNo2n3UA3N5X76a9JlV SdodoxGHbAbaqhjw
AOAtLF9R0zwzeXN1qXnak9vFdFNT1GITRnTrqbJWK6RQzSRxuZFVZGI+Z2Bb PYQ6YfEd9qUdxd3t
smlSRWlrHb3lzb+UPskE/wBql2SJ9qkkeXg3Xnw7YgNhLTb6SeLdXuPDsF86 C1e6i0pFvwY2UvfT
pBczrBtdY/JR1mjMoaJjKoIKo6nT8Qae3hTTJH066vEkuprO1ea4u7i8MIuL qKB7mMXTzrFIiSuw
CCODdtLxkIoHO+LEm8IR3Vrp11etHc6Jqs5E95cXMsM9pHD5VzFPcSyTwk+c UdY3WPeI3VUcMWWP
W761m0nRbuaX7XBfxhpPMO69sZNPv3glk248w7ovLnDjH2mAy4w0bHmdJ8R6 lZeGrO1vrmd7i9Ok
3VpdtM3nTRS39kl5bvJnezwtKwIJO+1njQlvLlxtaXql3YWmtayINRluLKXW WhuJ76SWwYW9zMsU
MdkL92Xy1ULkWMQCxuEkyV3eiWHhODyfMlvNRuZLmPE0v9oXaLLv2uXijhmS G0ywBQ2SW+1f3YPl
syt5bLBLY+G767hn1Oaf+2TZj/iZ3zSm3j1xLdYYWnvAsLvAPJMqyQuwJ8yX BZq6STTRd6lpOmS/
2tYW8trqk0lvLqt39o8yOWxWMy3FrqM7SACRzGhupERZMbVbKjW0rXrvT/DN /fTyNeS6SdTSOeTa
WuEsZJ1ieQoFUuVjCSMANzqzkAsRXM6mLyxjvJDeXbT6Da6fLBi5nCzyyvJL cPPFv2XC3TDyFjlS
RIEXbarC1ei+FbiUSahp8jvKun3piieRmd/Klt4LpEaRiWcxm4aNSxL+Wqbi T8zdfSHisWPw/p6W
k2n+SjWt288k0TlpEka5dpJiwctw7uzbR8q5wgUAAZkHgnSYIbiDypZhfQNb TyXF1dXMz27BgYRc
XE8k8cXzsQkciKGYuoDndULeA9KkgS2f7a6QzLPEzanqbSxSLG8QaKc3ZmiH lyOpSORUIb5lJArZ
0zQbPSHeW2WQyzJEkkk089xI6whhGrSXEkrnbvf+LksxOSSaxLj4f6JcRxQm CSNbeKSBPJuruBvI
lfzJLd3hnjeWAvyIZWeJeioq8VvzaLZzC1VolC6e6yWqrlFhdYngUqiFVIWK V0CEFACCFyqkZure
ENL1qY3F3FIXdBFL5VxcwLPEM7YrlIJY0uohucCO4WVAryLt2u4a23hvTXM+ 62jZbyCK2nRhuieC
EOIojESYgiCRxhVXIODnC4p2fg7S7OCW0EctxBcR+TJHeXV1eL5WMeWou5p/ KjOeVj2BiFJB2riO
DwTpMENxD5UswvoGtp5Li6urmZrdgwMIuLieSeOL52ISORFVmLgBjmr954a0 6/uLS8uIFe40wubS
TLhot6eW4BVhuVk4KvuXIDY3AEVJvBmj3FnaaZLbhrXTHhltELyZhkt/9Uyy b/MJXodzneCQ+4Ei
lsPCOm6ZcSXVqLhWneaSSI3t49sz3DM8zfZHuGtQXZmY4hGCSVxS6R4R03Qp RLYpLGFDLHE11dSW
8SsckW9rJM9tbgfdUQRRhUJjXahK0+48J6ZdWMumSRMLa4na6dUmnjfz2uPt RkWVJFljb7QBIPLd
QpGFAUAVRm8CaXcCHzDfF7XzRFL/AGpqYnVZzGZVM4uxO6MYkPlu7Iu35QMn O7/Y9mtidKSJIrIw
tB5KKFQRMpVkVQMAbSR096wbfwXZuLaTUc3l3ZpFH5waWFZ1t3L25uoEmMNy 8LYkQzrIEmLzQpCX
2jX0HSG0lJjNIJ7i7uJLmaUJ5as77UQLHvk2rHDHFEo3sSI97EszVu1UvrG3 1KBrW8ijuYJRh4pU
WSNxnOGRwVYZGcEGvJfA3gvQZtOvFl0ywdW1PU0Ia0t2BSG/uFhQgx4KRKAs S9EAAUACud0C20/w
j4X0PxHDBBarbLbyXssUccbSRXUDWzvMyhN5EkkUhZ2/gBOcCn+HRNBe2ugX zYke4XxFcBjgLE9t
5ko+8cKmrMXGMAAAAEZapfCfiSKTWY9RIvFHiI3KOZrO9htx5WZNL2Tzwx27 7rKOUYhdy8kgIyOR
jeG4rm1nsdXsQ0k+neGdHeSBdx+0Wrvei4hCjrLhVmg45mhSPIWRiNvQteu2 0TUbjRJraVZP+Egu
7YIS93JIL+QwzQRfckgCudxIJ81oV6ORXST6VpWk6FPrHhmOFtQm0+d7e9i2 yXd2xhaTfJNu827k
LDzCJXkJkUNjKjFKPStH0O50Sfw6sSTahI/mSREeZfWbWcsss904Be52yfZ5 vPmLMJnQBwZiG880
6d9B8K6Zp05LWmpto9xZMc/Jcfb7N7q0yePnG66gGQSDcqAFhXNm9nfw9oWv XMjZ0/Vp9fgkyTi3
vBPeR27jqFjulC27dMTpbAZMzEdd4Z0k3HiHUr4afp9w0E1qFvZmH2yBv7Jt CqQIbR8oWI3H7XBj
e52nHz7XgrRdF1XTbbWL2K3utUnXbd3U6o9z9qdfKubV5Gy6Kjl7f7GG8pYh 5Ij8v5Tx934Z0nTb
TxfLZWNpbSW0M0cLRW8MbRRvo1u7pGUQFEdmZ2VcBmZmIyTV658MWi22iWd7 pWl2cNxq6GS2tQs9
vOBpl6VknV7K0UyFhyrRSAbVIkPRe28Dwx2UmqWlj/yDbW+KWiKSY4j9nga5 gg/hWGK5MiiKP5IZ
PNiULt2J5xb2VjqtnbvrKxyR3Gh3urO0u35byaSB57lW6pPao6RQzAiS3jOy NlGQO/8AA7zRXs0E
vytcadpl/OmMBby4W4juWI/haX7PG7AcFwzsAzln9MoopG4FVYLWG0UpBGkS u7yMEUKGeRi8jkKA
C7uSzseWYliSTUB0qze1/s428JswojFv5SeTsGMJ5W3ZtGBhduBgYFOl061n dppYYnkaI27O0aFm
hY5aFmIyYmPJjJ2E8kZpzafbSRxxPFE0cBRokKKVjaP/AFbRqRhGjwNhXBX+ HFJbaZaWJDW0EMJW
JIFMcaIRDEWMUQ2gYijLMY4x8ibm2gZNQ2ej2Ngyva20FuyiUKYokjKiVxJK AVUECWQCSQD77gO2
WANQWXhzStMuZL6ysrS2up93mzw28Ucsm9g7eZIiB33Phm3E5YBjzzTtP8Pa ZpMstxYWlraTXJzN
JBBFFJKSxYmR0QNISxLEsTySepqVtHsWhis2toDbQFGihMUZiiaIgxNHHt2I YzgoVAKEArg0PpNl
LbSWclvA1tOztLC0SGKRpGLyNJGVKuZHJdywJZiWbJOapP4X0drwam1hZtfJ tK3JtoTOpQbEIm2e
YNqgKuG+VQAMAAVMvh3S1vTqws7Qagc5uxbxC4Py+X/r9nm/c+T733fl6cVa fTrR1mR4IWW8H+kq
Y0InzGIv3wIxL+7VY/n3fuwE+6AKxE8D+HltzZjS9OFs7rK0Is7fyjIqsqyG Py9hdVZlViNwVmAO
Ca6G1tIbCJLa1jSCGJVSOONQiIoGAqIoCqoHACgADgCsKDwnpqQi2nhjvIYb l7q3S5jimFtI7lz5
G6PKBXZ2jJLSJuKq4QKq6Wn6RHp9xc3QZ5Zr1w8jyFSVVFCRwptRAsMQ3FFI ZtzyOzszk1r0UV//
2Q==
------=_NextPart_000_0082_01CE8150.0ADA2B80--

Attached files

Publicado: **Mar Jul 16, 2013 9:36 am**

Jose,
it seems to be a minGW problem. Compiled and linked with Harbour and BCC
there's no problem.
Regards
Ingo
"Ingo" <support@mandantwin.com> schrieb im Newsbeitrag
news:[email=51e3c373@svctag-j7w3v3j....]51e3c373@svctag-j7w3v3j....[/email]
Dear Jose Gimenez,
I was using TwainControlX.ocx from ScianSoft as ActiveX component in my
project built with xHarbour and BCC in Xailer 2.7.5 without any problem.
Now compiling and linking this project under Xailer 3.02 with Harbour and
minGW this GPF occurs.
I am using the libhbwin.a modified by you. The same GPF occurs too with the
unmodified
libhbwin.a.
Could you help me again please?
Regards
Ingo

Publicado: **Mar Jul 16, 2013 10:31 am**

Ingo,
sorry for the delay. I'm aware of random problems with OLE in Harbour.
There is another user who also has problems with a scanner OCX, but
sadly I'm not able to reproduce the GPF here. Please, send me a small
sample to check it here. I hope I could catch it.
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info

Publicado: **Mar Jul 16, 2013 12:08 pm**

Jose,
don't mention it.
Here ist the sample.
Before running you must install the trial version of TwainControlX from
http://www.ciansoft.com/twaincontrolx/default.asp
Regards
Ingo
--

Attached files TestScan.zip (6.3 KB)Â

Publicado: **Mié Jul 17, 2013 10:15 pm**

Ingo,
sorry for the delay.
I've been playing with this for a few hours, and, in fact, there is a
problem... it works in my 3 computers!
It's exactly the same problem that has another user, Bingen. Well, both
you are using the same OCX, which I didn't know before. But there are a
few differences. Bingen sent me a sample that uses an old version of the
OCX. He wrote an article in our blog to show how to use it:
http://xailer.info/esp/?p=234 Now, the link is broken, but you may
download it from here: https://www.dropbox.com/s/u0cohhlpfe7jhy0/Escaner.zip
When I downloaded your sample, I had to unregister the old OCX and
download and install the lastest version from Sciansoft. The curious
thing is that this last OCX only recognizes TWAIN scaners, and my HP
Scanjet 3800 was not detected. Finally, I could install a TWAIN driver
for it, and your sample is working fine here. If I re-register the old
OCX, then it recognizes my scanner as TWAIN as well as WIA, and even it
detects my smartphone

In order to run both versions of the OCX, alternatively, I had to set
(or avoid) its property 'password'. This property only exists in the old
version, but it's absolutely needed. ITOH, it doesn't exists in the
lastest version, so I had to comment it out. That's all. However, the
result is that the lastest version only recognizes TWAIN, while the old
version detects TWAIN, WIA and smartphones.
In short, the main problem remains the same... I cannot reproduce the
problem here. And trust me, I've tried every thing that is in my hands.
BTW, due to the problems that has Bingen with this OCX, I decided to
write a class to support scaners directly from Xailer. This class uses
the WIA interface, which is shipped in windows XP and laters versions.
Here you are an early-bird sample, if you would like to test it:
https://www.dropbox.com/s/df7g60znsm4wk55/escaner.rar It's in spanish,
sorry. To scan, just use one of the last buttons: "Escanear (COM)" and
"Escanear (OLE)". The first one should work in every windows version
(from XP), and the second one should work in Vista and later. Of course,
the main goal is to use COM in order to support also XP, although it's
much more difficult to develop the class itself.
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info

Publicado: **Jue Jul 18, 2013 9:29 am**

Jose,
thank you for your endevaour solving my problem.
As I posted at the 16th this problem occurs only when linked with minGW.
Linked with BCC it runs without problems.
My working computer is a windows 8/64bit. The TwainControlX.ocx version is
2.4.0.30. Both TWAIN and WIA drivers are detected. If you need this ocx,
please tell me.
Now trying your escaner Class with COM. Only WIA is detected as you said.
But Escaner (OLE) causes the error in the attached error.log
Regards
Ingo
"Jose F. Gimenez" <jfgimenezAM]"@wanadoo.es> schrieb im Newsbeitrag
news:[email=51e6fb5d@svctag-j7w3v3j....]51e6fb5d@svctag-j7w3v3j....[/email]
> Ingo,
>
> sorry for the delay.
>
> I've been playing with this for a few hours, and, in fact, there is a
> problem... it works in my 3 computers!
>
> It's exactly the same problem that has another user, Bingen. Well, both
> you are using the same OCX, which I didn't know before. But there are a
> few differences. Bingen sent me a sample that uses an old version of the
> OCX. He wrote an article in our blog to show how to use it:
> http://xailer.info/esp/?p=234 Now, the link is broken, but you may
> download it from here:
> https://www.dropbox.com/s/u0cohhlpfe7jhy0/Escaner.zip
>
> When I downloaded your sample, I had to unregister the old OCX and
> download and install the lastest version from Sciansoft. The curious thing
> is that this last OCX only recognizes TWAIN scaners, and my HP Scanjet
> 3800 was not detected. Finally, I could install a TWAIN driver for it, and
> your sample is working fine here. If I re-register the old OCX, then it
> recognizes my scanner as TWAIN as well as WIA, and even it detects my
> smartphone

>
> In order to run both versions of the OCX, alternatively, I had to set (or
> avoid) its property 'password'. This property only exists in the old
> version, but it's absolutely needed. ITOH, it doesn't exists in the
> lastest version, so I had to comment it out. That's all. However, the
> result is that the lastest version only recognizes TWAIN, while the old
> version detects TWAIN, WIA and smartphones.
>
> In short, the main problem remains the same... I cannot reproduce the
> problem here. And trust me, I've tried every thing that is in my hands.
>
> BTW, due to the problems that has Bingen with this OCX, I decided to write
> a class to support scaners directly from Xailer. This class uses the WIA
> interface, which is shipped in windows XP and laters versions. Here you
> are an early-bird sample, if you would like to test it:
> https://www.dropbox.com/s/df7g60znsm4wk55/escaner.rar It's in spanish,
> sorry. To scan, just use one of the last buttons: "Escanear (COM)" and
> "Escanear (OLE)". The first one should work in every windows version (from
> XP), and the second one should work in Vista and later. Of course, the
> main goal is to use COM in order to support also XP, although it's much
> more difficult to develop the class itself.
>
>
> Regards,
>
> Jose F. Gimenez
> http://www.xailer.com
> http://www.xailer.info
--

Attached files Error.log (11 B)Â

Publicado: **Jue Jul 18, 2013 10:03 am**

Jose,
I have tried now the Bingen sample. Compiled with Harbour.
If linked with BCC it is running without any problem.
But linked with minGW there is the same GPF as I posted.
HB's AutoOle seems not work correct with minGW.
Regards
Ingo
"Jose F. Gimenez" <jfgimenezAM]"@wanadoo.es> schrieb im Newsbeitrag
news:[email=51e6fb5d@svctag-j7w3v3j....]51e6fb5d@svctag-j7w3v3j....[/email]
> Ingo,
>
> sorry for the delay.
>
> I've been playing with this for a few hours, and, in fact, there is a
> problem... it works in my 3 computers!
>
> It's exactly the same problem that has another user, Bingen. Well, both
> you are using the same OCX, which I didn't know before. But there are a
> few differences. Bingen sent me a sample that uses an old version of the
> OCX. He wrote an article in our blog to show how to use it:
> http://xailer.info/esp/?p=234 Now, the link is broken, but you may
> download it from here:
> https://www.dropbox.com/s/u0cohhlpfe7jhy0/Escaner.zip
>
> When I downloaded your sample, I had to unregister the old OCX and
> download and install the lastest version from Sciansoft. The curious thing
> is that this last OCX only recognizes TWAIN scaners, and my HP Scanjet
> 3800 was not detected. Finally, I could install a TWAIN driver for it, and
> your sample is working fine here. If I re-register the old OCX, then it
> recognizes my scanner as TWAIN as well as WIA, and even it detects my
> smartphone

>
> In order to run both versions of the OCX, alternatively, I had to set (or
> avoid) its property 'password'. This property only exists in the old
> version, but it's absolutely needed. ITOH, it doesn't exists in the
> lastest version, so I had to comment it out. That's all. However, the
> result is that the lastest version only recognizes TWAIN, while the old
> version detects TWAIN, WIA and smartphones.
>
> In short, the main problem remains the same... I cannot reproduce the
> problem here. And trust me, I've tried every thing that is in my hands.
>
> BTW, due to the problems that has Bingen with this OCX, I decided to write
> a class to support scaners directly from Xailer. This class uses the WIA
> interface, which is shipped in windows XP and laters versions. Here you
> are an early-bird sample, if you would like to test it:
> https://www.dropbox.com/s/df7g60znsm4wk55/escaner.rar It's in spanish,
> sorry. To scan, just use one of the last buttons: "Escanear (COM)" and
> "Escanear (OLE)". The first one should work in every windows version (from
> XP), and the second one should work in Vista and later. Of course, the
> main goal is to use COM in order to support also XP, although it's much
> more difficult to develop the class itself.
>
>
> Regards,
>
> Jose F. Gimenez
> http://www.xailer.com
> http://www.xailer.info

Publicado: **Vie Jul 19, 2013 12:32 pm**

Ingo,
> As I posted at the 16th this problem occurs only when linked with
> minGW. Linked with BCC it runs without problems.
> My working computer is a windows 8/64bit. The TwainControlX.ocx
> version is 2.4.0.30. Both TWAIN and WIA drivers are detected. If you
> need this ocx, please tell me.
I've tested both MinGW and BCC, resulting in exactly the same behaviour.
When Bingen advised me about his problem, I was using Win8/32, but now
I'm using Win8/64. In both cases, the sample runs in my computer without
any GPF. Moreover, I've tested it in other computers and other OS under
VBox. The only issues are those I told before (about TWAIN and WIA
devices detection and the presence/ausence of the property password).
I'm affraid, I'm not able to reproduce the problem. I thought that one
difference between me and you is that I use a demo version of the OCX.
But I said it to Bingen and he deregistered his OCX and installed a demo
one, and still did GPF. So, how can I solve a problem that I cannot
reproduce? I'll continue researching on it, but at the same time, I'll
continue to develop the own class.
> Now trying your escaner Class with COM. Only WIA is detected as you said.
> But Escaner (OLE) causes the error in the attached error.log
Thanks for your test. Is I said before, OLE is not important, since the
goal is to use COM. Have you tried to scan a page?
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info

Publicado: **Mié Ene 29, 2014 2:05 pm**

Jose,
Necessito saber como está o desenvolvimento da classe para digitalização. Estou desenvolvendo um projeto e já testei várias ferramentas. Grande maioria possui recursos limitados ou ocorre erros em algumas situaçíµes. Testei o exemplo que postou nesse artigo e é, sem dúvidas, a mais completa. Então, gostaria saber sobre como tenho acesso a ela (valores, documentação, etc.).
Saludo,
Sebastião Sérgio.

Publicado: **Mié Ene 29, 2014 7:16 pm**

Sebastião,
> Necessito saber como está o desenvolvimento da classe para
> digitalização. Estou desenvolvendo um projeto e já testei
> várias ferramentas. Grande maioria possui recursos
> limitados ou ocorre erros em algumas situaçíµes. Testei o
> exemplo que postou nesse artigo e é, sem dúvidas, a mais
> completa. Então, gostaria saber sobre como tenho acesso a
> ela (valores, documentação, etc.).
[SPANISH]
Por ahora está parada, ya que los dos usuarios que tenían problemas con
el OCX de ScianSoft están funcionando. No obstante, continuaré su
desarrollo cuando pueda.
[ENGLISH]
For now it's stopped, since both users which had problems with
ScianSoft's OCX are working now. However, I'll continue developing it
when possible.
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info

Xailer & OZ Software

OLE problem with Harbour and MinGW

OLE problem with Harbour and MinGW

OLE problem with Harbour and MinGW

OLE problem with Harbour and MinGW

OLE problem with Harbour and MinGW

OLE problem with Harbour and MinGW

OLE problem with Harbour and MinGW

OLE problem with Harbour and MinGW

OLE problem with Harbour and MinGW

OLE problem with Harbour and MinGW

OLE problem with Harbour and MinGW