Hi Chris
Can you confirm that you still get that trace in the later version of Xailer
when copying the browse?
If you can, send me the project and I will have another go at it.
The guys seem to fix anything we can easily show them how to reproduce, we
probably just need to supply it a way they can make it happen. As I
mentioned, I can't do it either.
Cheers
Nick
"Chris Gillard" <
chris@bluesquare.co.uk> wrote in message
news:4860d4d5$[email=
1@ozsrv2.ozlan.local...]
1@ozsrv2.ozlan.local...[/email]
> Hi,
>
> Need to slow down ... probably.
>
> Thanks for confirming the odd tab contents behaviour in the ide.
>
> Again xailer not commenting on this one either.
>
> Chris
>
> "Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
> news:[email=
48602026@ozsrv2.ozlan.local...]
48602026@ozsrv2.ozlan.local...[/email]
>>I need to slow down, the post above this relates to the issue of the
>>browse appearing on the wrong tab.
>>
>>
>> "Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
>> news:[email=
48601dce@ozsrv2.ozlan.local...]
48601dce@ozsrv2.ozlan.local...[/email]
>>> Ignore that post, you can't use the arrows on those controls
>>>
>>> I tried to reproduce this problem as well but had no luck
>>>
>>> Again, in 1.9.5.
>>>
>>> Does it only happen in a partcular project, or can you create a brand
>>> new one and make it do it. The reason I ask is I had an issue last week
>>> where in the editor my browse appeared perfectly, but at runtime all the
>>> columns where gone. I could work out why. (even after looking in the
>>> XFM)
>>>
>>> Nick
>>>
>>> "Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
>>> news:[email=
48601c9e@ozsrv2.ozlan.local...]
48601c9e@ozsrv2.ozlan.local...[/email]
>>>> Hi Chris
>>>>
>>>> Have you tried this under version 1.9.5, I can't reproduce it. I just
>>>> tried cutting using the right mouse on the form and the object browser
>>>> and both worked fine. I created the form like yours. I didn't hook up
>>>> any data though.
>>>>
>>>> Nick
>>>>
>>>>
>>>> "Chris Gillard" <
chris@bluesquare.co.uk> wrote in message
>>>> news:485a6a1b$[email=
1@ozsrv2.ozlan.local...]
1@ozsrv2.ozlan.local...[/email]
>>>>> Any Comment ?
>>>>>
>>>>> Chris
>>>>>
>>>>> "Chris Gillard" <
chris@bluesquare.co.uk> wrote in message
>>>>> news:[email=
48526a15@ozsrv2.ozlan.local...]
48526a15@ozsrv2.ozlan.local...[/email]
>>>>>> In the IDE, If you try to cut & paste a dbfbrowse control you can get
>>>>>> problems.
>>>>>>
>>>>>> See attached image of error.
>>>>>>
>>>>>> Xailer 1.9.3
>>>>>>
>>>>>> Regards
>>>>>>
>>>>>> Chris
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>