Xailer & OZ Software

When adding controls to a rebar, if you use the Object Inspector up and down
arrow to change the control order, the order is not visually reflected on
the rebar. You have to exit and restart Xailer to see the change.

Andrew,
> When adding controls to a rebar, if you use the Object Inspector up and
> down arrow to change the control order, the order is not visually
> reflected on the rebar. You have to exit and restart Xailer to see the
> change.
Thanks for the info. We'll review it ASAP.
--
Regards,
Jose F. Gimenez
http://www.xailer.com