IDE problem #2

[ChrisGillard]

In the IDE, If you try to cut & paste a dbfbrowse control you can get
problems.
See attached image of error.
Xailer 1.9.3
Regards
Chris


Attached files

[ChrisGillard]

Any Comment ?
Chris
"Chris Gillard" <chris@bluesquare.co.uk> wrote in message
news:[email=48526a15@ozsrv2.ozlan.local...]48526a15@ozsrv2.ozlan.local...[/email]
> In the IDE, If you try to cut & paste a dbfbrowse control you can get
> problems.
>
> See attached image of error.
>
> Xailer 1.9.3
>
> Regards
>
> Chris
>
>
>
>
>

[ChrisGillard]

Any Comment ?
Chris
"Chris Gillard" <chris@bluesquare.co.uk> wrote in message
news:[email=48526a15@ozsrv2.ozlan.local...]48526a15@ozsrv2.ozlan.local...[/email]
> In the IDE, If you try to cut & paste a dbfbrowse control you can get
> problems.
>
> See attached image of error.
>
> Xailer 1.9.3
>
> Regards
>
> Chris
>
>
>
>
>

[Nick Hilder]

Hi Chris
Have you tried this under version 1.9.5, I can't reproduce it. I just tried
cutting using the right mouse on the form and the object browser and both
worked fine. I created the form like yours. I didn't hook up any data
though.
Nick
"Chris Gillard" <chris@bluesquare.co.uk> wrote in message
news:485a6a1b$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Any Comment ?
>
> Chris
>
> "Chris Gillard" <chris@bluesquare.co.uk> wrote in message
> news:[email=48526a15@ozsrv2.ozlan.local...]48526a15@ozsrv2.ozlan.local...[/email]
>> In the IDE, If you try to cut & paste a dbfbrowse control you can get
>> problems.
>>
>> See attached image of error.
>>
>> Xailer 1.9.3
>>
>> Regards
>>
>> Chris
>>
>>
>>
>>
>>
>
>

[Nick Hilder]

Hi Chris
Have you tried this under version 1.9.5, I can't reproduce it. I just tried
cutting using the right mouse on the form and the object browser and both
worked fine. I created the form like yours. I didn't hook up any data
though.
Nick
"Chris Gillard" <chris@bluesquare.co.uk> wrote in message
news:485a6a1b$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Any Comment ?
>
> Chris
>
> "Chris Gillard" <chris@bluesquare.co.uk> wrote in message
> news:[email=48526a15@ozsrv2.ozlan.local...]48526a15@ozsrv2.ozlan.local...[/email]
>> In the IDE, If you try to cut & paste a dbfbrowse control you can get
>> problems.
>>
>> See attached image of error.
>>
>> Xailer 1.9.3
>>
>> Regards
>>
>> Chris
>>
>>
>>
>>
>>
>
>

[Nick Hilder]

Ignore that post, you can't use the arrows on those controls
I tried to reproduce this problem as well but had no luck
Again, in 1.9.5.
Does it only happen in a partcular project, or can you create a brand new
one and make it do it. The reason I ask is I had an issue last week where in
the editor my browse appeared perfectly, but at runtime all the columns
where gone. I could work out why. (even after looking in the XFM)
Nick
"Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
news:[email=48601c9e@ozsrv2.ozlan.local...]48601c9e@ozsrv2.ozlan.local...[/email]
> Hi Chris
>
> Have you tried this under version 1.9.5, I can't reproduce it. I just
> tried cutting using the right mouse on the form and the object browser and
> both worked fine. I created the form like yours. I didn't hook up any data
> though.
>
> Nick
>
>
> "Chris Gillard" <chris@bluesquare.co.uk> wrote in message
> news:485a6a1b$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>> Any Comment ?
>>
>> Chris
>>
>> "Chris Gillard" <chris@bluesquare.co.uk> wrote in message
>> news:[email=48526a15@ozsrv2.ozlan.local...]48526a15@ozsrv2.ozlan.local...[/email]
>>> In the IDE, If you try to cut & paste a dbfbrowse control you can get
>>> problems.
>>>
>>> See attached image of error.
>>>
>>> Xailer 1.9.3
>>>
>>> Regards
>>>
>>> Chris
>>>
>>>
>>>
>>>
>>>
>>
>>
>
>

[Nick Hilder]

Ignore that post, you can't use the arrows on those controls
I tried to reproduce this problem as well but had no luck
Again, in 1.9.5.
Does it only happen in a partcular project, or can you create a brand new
one and make it do it. The reason I ask is I had an issue last week where in
the editor my browse appeared perfectly, but at runtime all the columns
where gone. I could work out why. (even after looking in the XFM)
Nick
"Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
news:[email=48601c9e@ozsrv2.ozlan.local...]48601c9e@ozsrv2.ozlan.local...[/email]
> Hi Chris
>
> Have you tried this under version 1.9.5, I can't reproduce it. I just
> tried cutting using the right mouse on the form and the object browser and
> both worked fine. I created the form like yours. I didn't hook up any data
> though.
>
> Nick
>
>
> "Chris Gillard" <chris@bluesquare.co.uk> wrote in message
> news:485a6a1b$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>> Any Comment ?
>>
>> Chris
>>
>> "Chris Gillard" <chris@bluesquare.co.uk> wrote in message
>> news:[email=48526a15@ozsrv2.ozlan.local...]48526a15@ozsrv2.ozlan.local...[/email]
>>> In the IDE, If you try to cut & paste a dbfbrowse control you can get
>>> problems.
>>>
>>> See attached image of error.
>>>
>>> Xailer 1.9.3
>>>
>>> Regards
>>>
>>> Chris
>>>
>>>
>>>
>>>
>>>
>>
>>
>
>

[Nick Hilder]

I need to slow down, the post above this relates to the issue of the browse
appearing on the wrong tab.
"Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
news:[email=48601dce@ozsrv2.ozlan.local...]48601dce@ozsrv2.ozlan.local...[/email]
> Ignore that post, you can't use the arrows on those controls
>
> I tried to reproduce this problem as well but had no luck
>
> Again, in 1.9.5.
>
> Does it only happen in a partcular project, or can you create a brand new
> one and make it do it. The reason I ask is I had an issue last week where
> in the editor my browse appeared perfectly, but at runtime all the columns
> where gone. I could work out why. (even after looking in the XFM)
>
> Nick
>
> "Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
> news:[email=48601c9e@ozsrv2.ozlan.local...]48601c9e@ozsrv2.ozlan.local...[/email]
>> Hi Chris
>>
>> Have you tried this under version 1.9.5, I can't reproduce it. I just
>> tried cutting using the right mouse on the form and the object browser
>> and both worked fine. I created the form like yours. I didn't hook up any
>> data though.
>>
>> Nick
>>
>>
>> "Chris Gillard" <chris@bluesquare.co.uk> wrote in message
>> news:485a6a1b$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>> Any Comment ?
>>>
>>> Chris
>>>
>>> "Chris Gillard" <chris@bluesquare.co.uk> wrote in message
>>> news:[email=48526a15@ozsrv2.ozlan.local...]48526a15@ozsrv2.ozlan.local...[/email]
>>>> In the IDE, If you try to cut & paste a dbfbrowse control you can get
>>>> problems.
>>>>
>>>> See attached image of error.
>>>>
>>>> Xailer 1.9.3
>>>>
>>>> Regards
>>>>
>>>> Chris
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

[Nick Hilder]

I need to slow down, the post above this relates to the issue of the browse
appearing on the wrong tab.
"Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
news:[email=48601dce@ozsrv2.ozlan.local...]48601dce@ozsrv2.ozlan.local...[/email]
> Ignore that post, you can't use the arrows on those controls
>
> I tried to reproduce this problem as well but had no luck
>
> Again, in 1.9.5.
>
> Does it only happen in a partcular project, or can you create a brand new
> one and make it do it. The reason I ask is I had an issue last week where
> in the editor my browse appeared perfectly, but at runtime all the columns
> where gone. I could work out why. (even after looking in the XFM)
>
> Nick
>
> "Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
> news:[email=48601c9e@ozsrv2.ozlan.local...]48601c9e@ozsrv2.ozlan.local...[/email]
>> Hi Chris
>>
>> Have you tried this under version 1.9.5, I can't reproduce it. I just
>> tried cutting using the right mouse on the form and the object browser
>> and both worked fine. I created the form like yours. I didn't hook up any
>> data though.
>>
>> Nick
>>
>>
>> "Chris Gillard" <chris@bluesquare.co.uk> wrote in message
>> news:485a6a1b$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>> Any Comment ?
>>>
>>> Chris
>>>
>>> "Chris Gillard" <chris@bluesquare.co.uk> wrote in message
>>> news:[email=48526a15@ozsrv2.ozlan.local...]48526a15@ozsrv2.ozlan.local...[/email]
>>>> In the IDE, If you try to cut & paste a dbfbrowse control you can get
>>>> problems.
>>>>
>>>> See attached image of error.
>>>>
>>>> Xailer 1.9.3
>>>>
>>>> Regards
>>>>
>>>> Chris
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

[ChrisGillard]

Hi,
Need to slow down ... probably.
Thanks for confirming the odd tab contents behaviour in the ide.
Again xailer not commenting on this one either.
Chris
"Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
news:[email=48602026@ozsrv2.ozlan.local...]48602026@ozsrv2.ozlan.local...[/email]
>I need to slow down, the post above this relates to the issue of the browse
>appearing on the wrong tab.
>
>
> "Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
> news:[email=48601dce@ozsrv2.ozlan.local...]48601dce@ozsrv2.ozlan.local...[/email]
>> Ignore that post, you can't use the arrows on those controls
>>
>> I tried to reproduce this problem as well but had no luck
>>
>> Again, in 1.9.5.
>>
>> Does it only happen in a partcular project, or can you create a brand new
>> one and make it do it. The reason I ask is I had an issue last week where
>> in the editor my browse appeared perfectly, but at runtime all the
>> columns where gone. I could work out why. (even after looking in the XFM)
>>
>> Nick
>>
>> "Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
>> news:[email=48601c9e@ozsrv2.ozlan.local...]48601c9e@ozsrv2.ozlan.local...[/email]
>>> Hi Chris
>>>
>>> Have you tried this under version 1.9.5, I can't reproduce it. I just
>>> tried cutting using the right mouse on the form and the object browser
>>> and both worked fine. I created the form like yours. I didn't hook up
>>> any data though.
>>>
>>> Nick
>>>
>>>
>>> "Chris Gillard" <chris@bluesquare.co.uk> wrote in message
>>> news:485a6a1b$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>>> Any Comment ?
>>>>
>>>> Chris
>>>>
>>>> "Chris Gillard" <chris@bluesquare.co.uk> wrote in message
>>>> news:[email=48526a15@ozsrv2.ozlan.local...]48526a15@ozsrv2.ozlan.local...[/email]
>>>>> In the IDE, If you try to cut & paste a dbfbrowse control you can get
>>>>> problems.
>>>>>
>>>>> See attached image of error.
>>>>>
>>>>> Xailer 1.9.3
>>>>>
>>>>> Regards
>>>>>
>>>>> Chris
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

[ChrisGillard]

Hi,
Need to slow down ... probably.
Thanks for confirming the odd tab contents behaviour in the ide.
Again xailer not commenting on this one either.
Chris
"Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
news:[email=48602026@ozsrv2.ozlan.local...]48602026@ozsrv2.ozlan.local...[/email]
>I need to slow down, the post above this relates to the issue of the browse
>appearing on the wrong tab.
>
>
> "Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
> news:[email=48601dce@ozsrv2.ozlan.local...]48601dce@ozsrv2.ozlan.local...[/email]
>> Ignore that post, you can't use the arrows on those controls
>>
>> I tried to reproduce this problem as well but had no luck
>>
>> Again, in 1.9.5.
>>
>> Does it only happen in a partcular project, or can you create a brand new
>> one and make it do it. The reason I ask is I had an issue last week where
>> in the editor my browse appeared perfectly, but at runtime all the
>> columns where gone. I could work out why. (even after looking in the XFM)
>>
>> Nick
>>
>> "Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
>> news:[email=48601c9e@ozsrv2.ozlan.local...]48601c9e@ozsrv2.ozlan.local...[/email]
>>> Hi Chris
>>>
>>> Have you tried this under version 1.9.5, I can't reproduce it. I just
>>> tried cutting using the right mouse on the form and the object browser
>>> and both worked fine. I created the form like yours. I didn't hook up
>>> any data though.
>>>
>>> Nick
>>>
>>>
>>> "Chris Gillard" <chris@bluesquare.co.uk> wrote in message
>>> news:485a6a1b$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>>> Any Comment ?
>>>>
>>>> Chris
>>>>
>>>> "Chris Gillard" <chris@bluesquare.co.uk> wrote in message
>>>> news:[email=48526a15@ozsrv2.ozlan.local...]48526a15@ozsrv2.ozlan.local...[/email]
>>>>> In the IDE, If you try to cut & paste a dbfbrowse control you can get
>>>>> problems.
>>>>>
>>>>> See attached image of error.
>>>>>
>>>>> Xailer 1.9.3
>>>>>
>>>>> Regards
>>>>>
>>>>> Chris
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

[Nick Hilder]

Hi Chris
Can you confirm that you still get that trace in the later version of Xailer
when copying the browse?
If you can, send me the project and I will have another go at it.
The guys seem to fix anything we can easily show them how to reproduce, we
probably just need to supply it a way they can make it happen. As I
mentioned, I can't do it either.
Cheers
Nick
"Chris Gillard" <chris@bluesquare.co.uk> wrote in message
news:4860d4d5$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Hi,
>
> Need to slow down ... probably.
>
> Thanks for confirming the odd tab contents behaviour in the ide.
>
> Again xailer not commenting on this one either.
>
> Chris
>
> "Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
> news:[email=48602026@ozsrv2.ozlan.local...]48602026@ozsrv2.ozlan.local...[/email]
>>I need to slow down, the post above this relates to the issue of the
>>browse appearing on the wrong tab.
>>
>>
>> "Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
>> news:[email=48601dce@ozsrv2.ozlan.local...]48601dce@ozsrv2.ozlan.local...[/email]
>>> Ignore that post, you can't use the arrows on those controls
>>>
>>> I tried to reproduce this problem as well but had no luck
>>>
>>> Again, in 1.9.5.
>>>
>>> Does it only happen in a partcular project, or can you create a brand
>>> new one and make it do it. The reason I ask is I had an issue last week
>>> where in the editor my browse appeared perfectly, but at runtime all the
>>> columns where gone. I could work out why. (even after looking in the
>>> XFM)
>>>
>>> Nick
>>>
>>> "Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
>>> news:[email=48601c9e@ozsrv2.ozlan.local...]48601c9e@ozsrv2.ozlan.local...[/email]
>>>> Hi Chris
>>>>
>>>> Have you tried this under version 1.9.5, I can't reproduce it. I just
>>>> tried cutting using the right mouse on the form and the object browser
>>>> and both worked fine. I created the form like yours. I didn't hook up
>>>> any data though.
>>>>
>>>> Nick
>>>>
>>>>
>>>> "Chris Gillard" <chris@bluesquare.co.uk> wrote in message
>>>> news:485a6a1b$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>>>> Any Comment ?
>>>>>
>>>>> Chris
>>>>>
>>>>> "Chris Gillard" <chris@bluesquare.co.uk> wrote in message
>>>>> news:[email=48526a15@ozsrv2.ozlan.local...]48526a15@ozsrv2.ozlan.local...[/email]
>>>>>> In the IDE, If you try to cut & paste a dbfbrowse control you can get
>>>>>> problems.
>>>>>>
>>>>>> See attached image of error.
>>>>>>
>>>>>> Xailer 1.9.3
>>>>>>
>>>>>> Regards
>>>>>>
>>>>>> Chris
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

[Nick Hilder]

Hi Chris
Can you confirm that you still get that trace in the later version of Xailer
when copying the browse?
If you can, send me the project and I will have another go at it.
The guys seem to fix anything we can easily show them how to reproduce, we
probably just need to supply it a way they can make it happen. As I
mentioned, I can't do it either.
Cheers
Nick
"Chris Gillard" <chris@bluesquare.co.uk> wrote in message
news:4860d4d5$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Hi,
>
> Need to slow down ... probably.
>
> Thanks for confirming the odd tab contents behaviour in the ide.
>
> Again xailer not commenting on this one either.
>
> Chris
>
> "Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
> news:[email=48602026@ozsrv2.ozlan.local...]48602026@ozsrv2.ozlan.local...[/email]
>>I need to slow down, the post above this relates to the issue of the
>>browse appearing on the wrong tab.
>>
>>
>> "Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
>> news:[email=48601dce@ozsrv2.ozlan.local...]48601dce@ozsrv2.ozlan.local...[/email]
>>> Ignore that post, you can't use the arrows on those controls
>>>
>>> I tried to reproduce this problem as well but had no luck
>>>
>>> Again, in 1.9.5.
>>>
>>> Does it only happen in a partcular project, or can you create a brand
>>> new one and make it do it. The reason I ask is I had an issue last week
>>> where in the editor my browse appeared perfectly, but at runtime all the
>>> columns where gone. I could work out why. (even after looking in the
>>> XFM)
>>>
>>> Nick
>>>
>>> "Nick Hilder" <nick_n0_spam_atcapsol.com.au> wrote in message
>>> news:[email=48601c9e@ozsrv2.ozlan.local...]48601c9e@ozsrv2.ozlan.local...[/email]
>>>> Hi Chris
>>>>
>>>> Have you tried this under version 1.9.5, I can't reproduce it. I just
>>>> tried cutting using the right mouse on the form and the object browser
>>>> and both worked fine. I created the form like yours. I didn't hook up
>>>> any data though.
>>>>
>>>> Nick
>>>>
>>>>
>>>> "Chris Gillard" <chris@bluesquare.co.uk> wrote in message
>>>> news:485a6a1b$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
>>>>> Any Comment ?
>>>>>
>>>>> Chris
>>>>>
>>>>> "Chris Gillard" <chris@bluesquare.co.uk> wrote in message
>>>>> news:[email=48526a15@ozsrv2.ozlan.local...]48526a15@ozsrv2.ozlan.local...[/email]
>>>>>> In the IDE, If you try to cut & paste a dbfbrowse control you can get
>>>>>> problems.
>>>>>>
>>>>>> See attached image of error.
>>>>>>
>>>>>> Xailer 1.9.3
>>>>>>
>>>>>> Regards
>>>>>>
>>>>>> Chris
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

[jfgimenez]

Chris,
we're aware of several problems in copy/paste operations, when controls have
complex properties (aItems, and so on). We're rewriting that subsystem from
scratch, in order to definitely fix them, but it will take more time to be
ready. Sorry for any inconvenience.
--
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info

[jfgimenez]

Chris,
we're aware of several problems in copy/paste operations, when controls have
complex properties (aItems, and so on). We're rewriting that subsystem from
scratch, in order to definitely fix them, but it will take more time to be
ready. Sorry for any inconvenience.
--
Regards,
Jose F. Gimenez
http://www.xailer.com
http://www.xailer.info

[Nick Hilder]

That is great news, at least we now know, I was going to report some
others, I will leave it for now
Keep up the great work you guys....Xailer is the shining light in the
xharbour world.
Nick
"Jose F. Gimenez" <jfgimenez@wanadoo.es> wrote in message
news:4862af35$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Chris,
>
> we're aware of several problems in copy/paste operations, when controls
> have complex properties (aItems, and so on). We're rewriting that
> subsystem from scratch, in order to definitely fix them, but it will take
> more time to be ready. Sorry for any inconvenience.
>
> --
> Regards,
>
> Jose F. Gimenez
> http://www.xailer.com
> http://www.xailer.info
>

[Nick Hilder]

That is great news, at least we now know, I was going to report some
others, I will leave it for now
Keep up the great work you guys....Xailer is the shining light in the
xharbour world.
Nick
"Jose F. Gimenez" <jfgimenez@wanadoo.es> wrote in message
news:4862af35$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Chris,
>
> we're aware of several problems in copy/paste operations, when controls
> have complex properties (aItems, and so on). We're rewriting that
> subsystem from scratch, in order to definitely fix them, but it will take
> more time to be ready. Sorry for any inconvenience.
>
> --
> Regards,
>
> Jose F. Gimenez
> http://www.xailer.com
> http://www.xailer.info
>

[ChrisGillard]

Jose,
You are right there are a few problems with copying pasting of complex
controls .. like browses can loose their columns.
Glad to hear you are 'on the case'.
Regards
Chris
"Jose F. Gimenez" <jfgimenez@wanadoo.es> wrote in message
news:4862af35$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Chris,
>
> we're aware of several problems in copy/paste operations, when controls
> have complex properties (aItems, and so on). We're rewriting that
> subsystem from scratch, in order to definitely fix them, but it will take
> more time to be ready. Sorry for any inconvenience.
>
> --
> Regards,
>
> Jose F. Gimenez
> http://www.xailer.com
> http://www.xailer.info
>

[ChrisGillard]

Jose,
You are right there are a few problems with copying pasting of complex
controls .. like browses can loose their columns.
Glad to hear you are 'on the case'.
Regards
Chris
"Jose F. Gimenez" <jfgimenez@wanadoo.es> wrote in message
news:4862af35$[email=1@ozsrv2.ozlan.local...]1@ozsrv2.ozlan.local...[/email]
> Chris,
>
> we're aware of several problems in copy/paste operations, when controls
> have complex properties (aItems, and so on). We're rewriting that
> subsystem from scratch, in order to definitely fix them, but it will take
> more time to be ready. Sorry for any inconvenience.
>
> --
> Regards,
>
> Jose F. Gimenez
> http://www.xailer.com
> http://www.xailer.info
>