Hi.
Is is possible to "consume" a Webservice via Xailer ?
I need to access to A webservice using "SOAP protocol".
Anybody as such experience?
Regards
Pedro Faro
In order for this site to work correctly we need to store a small file (called a cookie) on your computer. Most every site in the world does this, however since the 25th of May 2011, by law we have to get your permission first. Please abandon the forum if you disagree.
Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.
Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.
Acessing to a webservice via Xailer
-
- Mensajes: 91
- Registrado: Mié May 30, 2007 5:25 pm
-
- Mensajes: 620
- Registrado: Jue Mar 23, 2006 2:39 am
Acessing to a webservice via Xailer
Pedro:
You bet you can, and is SOOOOOOO simple:
> WITH OBJECT ::oSoap := TOleAuto():New("MSSOAP.SoapClient30")
> TRY
> :MsSoapInit("http://Your.URL.with.the.web.service/goes/here.wsdl")
> :ConnectorProperty("UseSSL",.T.)
> :ConnectorProperty("AuthPassword","xt912")
> :ConnectorProperty("AuthUser","M2497")
> :ConnectorProperty("EndPointURL","https://your.end.point/goes/here")
> :ConnectorProperty("SSLClientCertificateName"," Hkey_users.DefaultSoftwareMicrosoftsystemcertificatesmy trust ")
> CATCH
> MsgInfo(:FaultString)
> Msginfo(:detail)
> END
:WebServiceMethod(parameters)
> END
You will need to install the MS Soap ToolKit 3.0 in order to be success
with the webservice connection.
Be aware that working under a SSL webservice you will have to install
the security certificates and you need to knwo where in the Windows
registry is the reference to the certificate, this is the hardest part
because it took us A LOT to guess where was the #@~##|¬~€ cerftificate.
Once connected to the webservice the call to the methods is so simple.
Regards
Rene Flores
http://www.ciber-tec.com
Faro escribió:
> Hi.
>
> Is is possible to "consume" a Webservice via Xailer ?
>
>
> I need to access to A webservice using "SOAP protocol".
> Anybody as such experience?
>
> Regards
>
> Pedro Faro
>
>
>
You bet you can, and is SOOOOOOO simple:
> WITH OBJECT ::oSoap := TOleAuto():New("MSSOAP.SoapClient30")
> TRY
> :MsSoapInit("http://Your.URL.with.the.web.service/goes/here.wsdl")
> :ConnectorProperty("UseSSL",.T.)
> :ConnectorProperty("AuthPassword","xt912")
> :ConnectorProperty("AuthUser","M2497")
> :ConnectorProperty("EndPointURL","https://your.end.point/goes/here")
> :ConnectorProperty("SSLClientCertificateName"," Hkey_users.DefaultSoftwareMicrosoftsystemcertificatesmy trust ")
> CATCH
> MsgInfo(:FaultString)
> Msginfo(:detail)
> END
:WebServiceMethod(parameters)
> END
You will need to install the MS Soap ToolKit 3.0 in order to be success
with the webservice connection.
Be aware that working under a SSL webservice you will have to install
the security certificates and you need to knwo where in the Windows
registry is the reference to the certificate, this is the hardest part
because it took us A LOT to guess where was the #@~##|¬~€ cerftificate.
Once connected to the webservice the call to the methods is so simple.
Regards
Rene Flores
http://www.ciber-tec.com
Faro escribió:
> Hi.
>
> Is is possible to "consume" a Webservice via Xailer ?
>
>
> I need to access to A webservice using "SOAP protocol".
> Anybody as such experience?
>
> Regards
>
> Pedro Faro
>
>
>
-
- Mensajes: 91
- Registrado: Mié May 30, 2007 5:25 pm
Acessing to a webservice via Xailer
Hi Rene
Many Tank's
"Rene Flores" <"rflores[nospam]"@ciber-tec.com> escreveu na mensagem
news:[email=4a8d82da@svctag-j7w3v3j....]4a8d82da@svctag-j7w3v3j....[/email]
> Pedro:
>
> You bet you can, and is SOOOOOOO simple:
>
>> WITH OBJECT ::oSoap := TOleAuto():New("MSSOAP.SoapClient30")
>> TRY
>>
>> :MsSoapInit("http://Your.URL.with.the.web.service/goes/here.wsdl")
>> :ConnectorProperty("UseSSL",.T.)
>> :ConnectorProperty("AuthPassword","xt912")
>> :ConnectorProperty("AuthUser","M2497")
>>
>> :ConnectorProperty("EndPointURL","https://your.end.point/goes/here")
>>
>> :ConnectorProperty("SSLClientCertificateName"," Hkey_users.DefaultSoftwareMicrosoftsystemcertificatesmy trust ")
>> CATCH
>> MsgInfo(:FaultString)
>> Msginfo(:detail)
>> END
> :WebServiceMethod(parameters)
>> END
>
> You will need to install the MS Soap ToolKit 3.0 in order to be success
> with the webservice connection.
>
> Be aware that working under a SSL webservice you will have to install the
> security certificates and you need to knwo where in the Windows registry
> is the reference to the certificate, this is the hardest part because it
> took us A LOT to guess where was the #@~##|¬~€ cerftificate.
>
> Once connected to the webservice the call to the methods is so simple.
>
> Regards
>
> Rene Flores
> http://www.ciber-tec.com
>
>
> Faro escribió:
>> Hi.
>>
>> Is is possible to "consume" a Webservice via Xailer ?
>>
>>
>> I need to access to A webservice using "SOAP protocol". Anybody as such
>> experience?
>>
>> Regards
>>
>> Pedro Faro
>>
>>
>>
>
Many Tank's
"Rene Flores" <"rflores[nospam]"@ciber-tec.com> escreveu na mensagem
news:[email=4a8d82da@svctag-j7w3v3j....]4a8d82da@svctag-j7w3v3j....[/email]
> Pedro:
>
> You bet you can, and is SOOOOOOO simple:
>
>> WITH OBJECT ::oSoap := TOleAuto():New("MSSOAP.SoapClient30")
>> TRY
>>
>> :MsSoapInit("http://Your.URL.with.the.web.service/goes/here.wsdl")
>> :ConnectorProperty("UseSSL",.T.)
>> :ConnectorProperty("AuthPassword","xt912")
>> :ConnectorProperty("AuthUser","M2497")
>>
>> :ConnectorProperty("EndPointURL","https://your.end.point/goes/here")
>>
>> :ConnectorProperty("SSLClientCertificateName"," Hkey_users.DefaultSoftwareMicrosoftsystemcertificatesmy trust ")
>> CATCH
>> MsgInfo(:FaultString)
>> Msginfo(:detail)
>> END
> :WebServiceMethod(parameters)
>> END
>
> You will need to install the MS Soap ToolKit 3.0 in order to be success
> with the webservice connection.
>
> Be aware that working under a SSL webservice you will have to install the
> security certificates and you need to knwo where in the Windows registry
> is the reference to the certificate, this is the hardest part because it
> took us A LOT to guess where was the #@~##|¬~€ cerftificate.
>
> Once connected to the webservice the call to the methods is so simple.
>
> Regards
>
> Rene Flores
> http://www.ciber-tec.com
>
>
> Faro escribió:
>> Hi.
>>
>> Is is possible to "consume" a Webservice via Xailer ?
>>
>>
>> I need to access to A webservice using "SOAP protocol". Anybody as such
>> experience?
>>
>> Regards
>>
>> Pedro Faro
>>
>>
>>
>