Hello again
We make programs for none Eglish Spoken customers. So when going to print a
file from the source editor we take....... see the atcahched photo.
A proposal is to let the programmer to choose which font sent to the printer
to hard copy its source code.
Many Thanks
Dionisis
Attached files
In order for this site to work correctly we need to store a small file (called a cookie) on your computer. Most every site in the world does this, however since the 25th of May 2011, by law we have to get your permission first. Please abandon the forum if you disagree.
Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.
Para que este foro funcione correctamente es necesario guardar un pequeño fichero (llamado cookie) en su ordenador. La mayoría de los sitios de Internet lo hacen, no obstante desde el 25 de Marzo de 2011 y por ley, necesitamos de su permiso con antelación. Abandone este foro si no está conforme.
Problem with preview and print characters in Source Editor
- Dionisis Divaris
- Mensajes: 484
- Registrado: Jue Jul 12, 2007 8:48 pm
- Ubicación: Athens Greece
- ignacio
- Site Admin
- Mensajes: 9254
- Registrado: Lun Abr 06, 2015 8:00 pm
- Ubicación: Madrid, Spain
- Contactar:
Problem with preview and print characters in Source Editor
Dionisis,
I suggest you try to change the font yourself on the editor configuration
dialog. It may work.
Regards,
"Dionisis Divaris" <sv1fkk@hol.gr> escribió en el mensaje
news:[email=4499d162@ozsrvnegro.ozlan.local...]4499d162@ozsrvnegro.ozlan.local...[/email]
> Hello again
>
> We make programs for none Eglish Spoken customers. So when going to print
> a file from the source editor we take....... see the atcahched photo.
>
> A proposal is to let the programmer to choose which font sent to the
> printer to hard copy its source code.
>
> Many Thanks
> Dionisis
>
>
>
I suggest you try to change the font yourself on the editor configuration
dialog. It may work.
Regards,
"Dionisis Divaris" <sv1fkk@hol.gr> escribió en el mensaje
news:[email=4499d162@ozsrvnegro.ozlan.local...]4499d162@ozsrvnegro.ozlan.local...[/email]
> Hello again
>
> We make programs for none Eglish Spoken customers. So when going to print
> a file from the source editor we take....... see the atcahched photo.
>
> A proposal is to let the programmer to choose which font sent to the
> printer to hard copy its source code.
>
> Many Thanks
> Dionisis
>
>
>
Problem with preview and print characters in Source Editor
Dionisis,
I suggest you try to change the font yourself on the editor configuration
dialog. It may work.
Regards,
"Dionisis Divaris" <sv1fkk@hol.gr> escribió en el mensaje
news:[email=4499d162@ozsrvnegro.ozlan.local...]4499d162@ozsrvnegro.ozlan.local...[/email]
> Hello again
>
> We make programs for none Eglish Spoken customers. So when going to print
> a file from the source editor we take....... see the atcahched photo.
>
> A proposal is to let the programmer to choose which font sent to the
> printer to hard copy its source code.
>
> Many Thanks
> Dionisis
>
>
>
I suggest you try to change the font yourself on the editor configuration
dialog. It may work.
Regards,
"Dionisis Divaris" <sv1fkk@hol.gr> escribió en el mensaje
news:[email=4499d162@ozsrvnegro.ozlan.local...]4499d162@ozsrvnegro.ozlan.local...[/email]
> Hello again
>
> We make programs for none Eglish Spoken customers. So when going to print
> a file from the source editor we take....... see the atcahched photo.
>
> A proposal is to let the programmer to choose which font sent to the
> printer to hard copy its source code.
>
> Many Thanks
> Dionisis
>
>
>
Problem with preview and print characters in Source Editor
Dionisis,
please, upload a screenshot of the SAME file in the code editor.
Also, tell us what font are you using in the editor for the "comments"
style.
--
Regards,
Jose F. Gimenez
http://www.xailer.com
please, upload a screenshot of the SAME file in the code editor.
Also, tell us what font are you using in the editor for the "comments"
style.
--
Regards,
Jose F. Gimenez
http://www.xailer.com
Problem with preview and print characters in Source Editor
Dionisis,
please, upload a screenshot of the SAME file in the code editor.
Also, tell us what font are you using in the editor for the "comments"
style.
--
Regards,
Jose F. Gimenez
http://www.xailer.com
please, upload a screenshot of the SAME file in the code editor.
Also, tell us what font are you using in the editor for the "comments"
style.
--
Regards,
Jose F. Gimenez
http://www.xailer.com
- Dionisis Divaris
- Mensajes: 484
- Registrado: Jue Jul 12, 2007 8:48 pm
- Ubicación: Athens Greece
Problem with preview and print characters in Source Editor
Hello Jose
In code editor i use the courier font for comments and i have no problems
to display the correct characters( with this font only , all other fonts
have the same problem as described above). I see that the problem with = and
space already fixed. But the problem in preview and print mode still exists.
The only correct output is with standard ehglish character set
I hope to help you to fix this problem
TIA
Dionisis
"Jose F. Gimenez" <jfgimenez@wanadoo.es> wrote in message
news:449a59f0$[email=1@ozsrvnegro.ozlan.local...]1@ozsrvnegro.ozlan.local...[/email]
> Dionisis,
>
> please, upload a screenshot of the SAME file in the code editor.
> Also, tell us what font are you using in the editor for the "comments"
> style.
>
>
> --
> Regards,
>
> Jose F. Gimenez
> http://www.xailer.com
>
In code editor i use the courier font for comments and i have no problems
to display the correct characters( with this font only , all other fonts
have the same problem as described above). I see that the problem with = and
space already fixed. But the problem in preview and print mode still exists.
The only correct output is with standard ehglish character set
I hope to help you to fix this problem
TIA
Dionisis
"Jose F. Gimenez" <jfgimenez@wanadoo.es> wrote in message
news:449a59f0$[email=1@ozsrvnegro.ozlan.local...]1@ozsrvnegro.ozlan.local...[/email]
> Dionisis,
>
> please, upload a screenshot of the SAME file in the code editor.
> Also, tell us what font are you using in the editor for the "comments"
> style.
>
>
> --
> Regards,
>
> Jose F. Gimenez
> http://www.xailer.com
>
- Dionisis Divaris
- Mensajes: 484
- Registrado: Jue Jul 12, 2007 8:48 pm
- Ubicación: Athens Greece
Problem with preview and print characters in Source Editor
Hello Jose
In code editor i use the courier font for comments and i have no problems
to display the correct characters( with this font only , all other fonts
have the same problem as described above). I see that the problem with = and
space already fixed. But the problem in preview and print mode still exists.
The only correct output is with standard ehglish character set
I hope to help you to fix this problem
TIA
Dionisis
"Jose F. Gimenez" <jfgimenez@wanadoo.es> wrote in message
news:449a59f0$[email=1@ozsrvnegro.ozlan.local...]1@ozsrvnegro.ozlan.local...[/email]
> Dionisis,
>
> please, upload a screenshot of the SAME file in the code editor.
> Also, tell us what font are you using in the editor for the "comments"
> style.
>
>
> --
> Regards,
>
> Jose F. Gimenez
> http://www.xailer.com
>
In code editor i use the courier font for comments and i have no problems
to display the correct characters( with this font only , all other fonts
have the same problem as described above). I see that the problem with = and
space already fixed. But the problem in preview and print mode still exists.
The only correct output is with standard ehglish character set
I hope to help you to fix this problem
TIA
Dionisis
"Jose F. Gimenez" <jfgimenez@wanadoo.es> wrote in message
news:449a59f0$[email=1@ozsrvnegro.ozlan.local...]1@ozsrvnegro.ozlan.local...[/email]
> Dionisis,
>
> please, upload a screenshot of the SAME file in the code editor.
> Also, tell us what font are you using in the editor for the "comments"
> style.
>
>
> --
> Regards,
>
> Jose F. Gimenez
> http://www.xailer.com
>